TRM strengthening as effective prevention against premature failure of masonry walls

Masonry structures are very prone to cracking and premature failure in the presence of shear loading. Therefore, effective prevention of their premature damage is needed. This paper presents laboratory tests of small models made of autoclaved aerated concrete (AAC) blocks, which were externally reinforced using two different strengthening sets consisting of mortar and mesh, and subjected to diagonal compression. The experiments used a commercialised system designed for the strengthening of typical masonry substrates (brick, stone) and a low-cost and lowstrength mesh and mortar set used as part of a system for insulating buildings. The analyses presented are of a comparative nature and describe changes in the behaviour of the models depending on the strengthening set used. The application of full-surface strengthening clearly changed the behaviour of AAC walls from brittle one to the ‘pseudo-ductile’ one observed after the appearance of the first cracks. In all strengthened models, a significant increase in the load capacity (from 3% to 62%) and a post-peak phase were reported. An interesting finding was the high efficiency of nonstructural materials (plastering system), comparable to the effects of the use of commercialised system solutions. This strengthening can be successfully considered as an effective preventive action. Finally, a simplified method is provided to calculate the contribution of the strengthening to the load bearing capacity of the strengthened models. The method defines the effect of the mesh and the mortar independently, based only on the basic material properties of these two components.