Przeskocz do nawigacji głównej Przeskocz do wyszukiwania Przeskocz do głównej treści

The influence of silicon amount on structure of Si modified aluminide coating deposited on Ti46AI7Nb alloy by slurry method

  • M. Goral
  • , G. Moskal
  • , L. Swadzba
  • , M. Hetmanczyk
  • Silesian University of Technology

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

4 Cytowania z bazy Scopus

Abstrakt

The alloys based on the intermetallic phases from Ti-Al system are materials which, on the grounds of their resistance characteristics, could be widely used in automotive and aerospace applications. The insufficient oxidation resistance of this alloys could be increased by the coating silicon modification. The technology used in this investigation was the immersion in water-based slurry containing metal powders. MHI high-Nb (14 wt %) alloy has been used as the research material for the coatings produced. The water-based slurries containing Al and Si powders have been prepared with 0-80 wt % Si content. The diffusion treatment has been done at 950°C in 4h in the Ar atmosphere. The investigation has showed that the thickness of the coatings ranged from 30 to 40 μrn. The structure of the Si-modified aluminide coatings is as follows: (a) outer zone consisting of TiAl3 phase and titanium suicides, (b) middle zone consisting of columnar titanium suicides in phase TiAl3 matrix (c) the inner zone consisting of TiAl2 phase. The XRD phase analysis has confirmed Ti5Si3 creation and, in case of the high silicon content (above 20 wt %), also other suicides: types Ti 5Si4,TiSi2,TiSi

Język oryginałuangielski
Tytuł publikacji goszczącejMaterials Structure and Micromechanics of Fracture VI
WydawcaTrans Tech Publications Ltd.
Strony251-254
Liczba stron4
ISBN (drukowany)9783037850060
Identyfikatory DOI
Status publikacjiOpublikowano - 2011

Seria publikacji

NazwaKey Engineering Materials
Tom465
ISSN (drukowany)1013-9826
ISSN (elektroniczny)1662-9795

Cele SDG ONZ

Ten wynik przyczynia się do realizacji następujących celów zrównoważonego rozwoju

  1. Cel 3 - Dobre zdrowie i dobre samopoczucie
    Cel 3 Dobre zdrowie i dobre samopoczucie

Obszary tematyczne ASJC Scopus

  • Materiałoznawstwo ogólne
  • Mechanika materiałowa
  • Inżynieria mechaniczna

Fingerprint

Zanurz się w tematy badawcze publikacji „The influence of silicon amount on structure of Si modified aluminide coating deposited on Ti46AI7Nb alloy by slurry method”. Razem tworzą niepowtarzalny odcisk palca.

Cytowanie