Przeskocz do nawigacji głównej Przeskocz do wyszukiwania Przeskocz do głównej treści

The comparison of hydrogen diffusion characteristics in different kinds of trip steels

  • VŠB – Technical University of Ostrava

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

Abstrakt

The presented paper is devoted to the comparison of hydrogen diffusion characteristics in three different kinds of TRIP steels (with higher phosphorus content, higher aluminum content and higher silicon content). The steels were tested in as-received state after standard heat treatment including two step annealing - an intercritical annealing and an annealing in the range of bainitic transformation and in states after 5 % and 10 % tensile deformation. Steel microstructures were analyzed by light microscopy, scanning electron microscopy and X - ray diffraction. Hydrogen diffusion characteristics were electrochemically measured by Devanathan- Stachurski method with a double cell separated by steel in the form of a thin membrane. Exit sides of the steel membrane were palladium coated to prevent from hydrogen atom recombination during permeation experiments. Hydrogen diffusion coefficients were calculated using the "time lag" method. The lowest values of hydrogen diffusion coefficients were recorded in the TRIP steel with higher aluminum content, while the highest values were observed in the TRIP with higher phosphorus content. Phosphorus probably enhances hydrogen diffusion in steel. Very high sub-surface hydrogen concentrations were observed also in the TRIP steel with higher phosphorus content.

Język oryginałuangielski
Tytuł publikacji goszczącejMETAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings
WydawcaTANGER Ltd.
Strony888-893
Liczba stron6
ISBN (elektroniczny)9788087294796
Status publikacjiOpublikowano - 2017
Wydarzenie26th International Conference on Metallurgy and Materials, METAL 2017 - Brno, Republika Czeska
Czas trwania: 24 maj 2017 → 26 maj 2017

Seria publikacji

NazwaMETAL 2017 - 26th International Conference on Metallurgy and Materials, Conference Proceedings
Tom2017-January

Konferencja

Konferencja26th International Conference on Metallurgy and Materials, METAL 2017
Kraj/TerytoriumRepublika Czeska
MiejscowośćBrno
Okres24/05/17 → 26/05/17

Cele SDG ONZ

Ten wynik przyczynia się do realizacji następujących celów zrównoważonego rozwoju

  1. Cel 7 - Przystępna i czysta energia
    Cel 7 Przystępna i czysta energia

Obszary tematyczne ASJC Scopus

  • Metale i stopy
  • Mechanika materiałowa
  • Powierzchnie, powłoki i filmy

Fingerprint

Zanurz się w tematy badawcze publikacji „The comparison of hydrogen diffusion characteristics in different kinds of trip steels”. Razem tworzą niepowtarzalny odcisk palca.

Cytowanie