Surface modification of high speed steels by diode laser remelting

Bogusław Major; Wojciech Bochnowski; Andrzej Klimpel; Reinhold Ebner

doi:10.1117/12.520713

Surface modification of high speed steels by diode laser remelting

Bogusław Major
, Wojciech Bochnowski
, Andrzej Klimpel
, Reinhold Ebner

Laboratorium Badania Materiałów (RMT/RMT L1)

Polish Academy of Sciences
University of Rzeszów
Materials Center Leoben Forschung GmbH

Wyniki badań: Wkład do czasopisma › Artykuł z konferencji › recenzja

3 Cytowania z bazy Scopus

Abstrakt

Contribution of diode laser remelting of high speed steels of grades: HS 2-10-1-8, HS 6-5-2 and HS 10-2-5-8 on microstructure, chemical composition, hardness and cutting performance was under examinations. Increase of hardness was observed in laser remelted zone in comparison to the conventional heat treated steels. Microanalysis SEM EDS showed differences in chemical composition in chosen regions of not treated and laser treated materials. Laser remelting caused the structure refinement and increase of the wear resistance, however, the cutting performance was diminished in respect to the steels not subjected to the laser modification. Residual stresses using X-ray method were measured both in steels after conventional heat treatment and subjected to the laser modification.

Język oryginału	angielski
Strony (od–do)	173-177
Liczba stron	5
Czasopismo	Proceedings of SPIE - The International Society for Optical Engineering
Tom	5229
Identyfikatory DOI	https://doi.org/10.1117/12.520713
Status publikacji	Opublikowano - 2003
Wydarzenie	Laser Technology VII: Applications of Lasers - Szczecin-Swinoujscie, Polska Czas trwania: 23 wrz 2002 → 27 wrz 2002

Obszary tematyczne ASJC Scopus

Materiały elektroniczne, optyczne i magnetyczne
Fizyka materii skondensowanej
Zastosowania informatyki
Matematyka stosowana
Inżynieria elektryczna i elektroniczna

Uzyskaj dostęp do dokumentu

10.1117/12.520713

Inne pliki i linki

Link do publikacji w Scopus

Cytuj to

@article{cb108234b16543e3830e66e8f1b13e38,

title = "Surface modification of high speed steels by diode laser remelting",

abstract = "Contribution of diode laser remelting of high speed steels of grades: HS 2-10-1-8, HS 6-5-2 and HS 10-2-5-8 on microstructure, chemical composition, hardness and cutting performance was under examinations. Increase of hardness was observed in laser remelted zone in comparison to the conventional heat treated steels. Microanalysis SEM EDS showed differences in chemical composition in chosen regions of not treated and laser treated materials. Laser remelting caused the structure refinement and increase of the wear resistance, however, the cutting performance was diminished in respect to the steels not subjected to the laser modification. Residual stresses using X-ray method were measured both in steels after conventional heat treatment and subjected to the laser modification.",

keywords = "Diode laser, High speed steel, Microstructure",

author = "Bogus{\l}aw Major and Wojciech Bochnowski and Andrzej Klimpel and Reinhold Ebner",

year = "2003",

doi = "10.1117/12.520713",

language = "English",

volume = "5229",

pages = "173--177",

journal = "Proceedings of SPIE - The International Society for Optical Engineering",

issn = "0277-786X",

publisher = "SPIE",

note = "Laser Technology VII: Applications of Lasers ; Conference date: 23-09-2002 Through 27-09-2002",

}

TY - JOUR

T1 - Surface modification of high speed steels by diode laser remelting

AU - Major, Bogusław

AU - Bochnowski, Wojciech

AU - Klimpel, Andrzej

AU - Ebner, Reinhold

PY - 2003

Y1 - 2003

N2 - Contribution of diode laser remelting of high speed steels of grades: HS 2-10-1-8, HS 6-5-2 and HS 10-2-5-8 on microstructure, chemical composition, hardness and cutting performance was under examinations. Increase of hardness was observed in laser remelted zone in comparison to the conventional heat treated steels. Microanalysis SEM EDS showed differences in chemical composition in chosen regions of not treated and laser treated materials. Laser remelting caused the structure refinement and increase of the wear resistance, however, the cutting performance was diminished in respect to the steels not subjected to the laser modification. Residual stresses using X-ray method were measured both in steels after conventional heat treatment and subjected to the laser modification.

AB - Contribution of diode laser remelting of high speed steels of grades: HS 2-10-1-8, HS 6-5-2 and HS 10-2-5-8 on microstructure, chemical composition, hardness and cutting performance was under examinations. Increase of hardness was observed in laser remelted zone in comparison to the conventional heat treated steels. Microanalysis SEM EDS showed differences in chemical composition in chosen regions of not treated and laser treated materials. Laser remelting caused the structure refinement and increase of the wear resistance, however, the cutting performance was diminished in respect to the steels not subjected to the laser modification. Residual stresses using X-ray method were measured both in steels after conventional heat treatment and subjected to the laser modification.

KW - Diode laser

KW - High speed steel

KW - Microstructure

UR - https://www.scopus.com/pages/publications/1242330502

U2 - 10.1117/12.520713

DO - 10.1117/12.520713

M3 - Conference article

AN - SCOPUS:1242330502

SN - 0277-786X

VL - 5229

SP - 173

EP - 177

JO - Proceedings of SPIE - The International Society for Optical Engineering

JF - Proceedings of SPIE - The International Society for Optical Engineering

T2 - Laser Technology VII: Applications of Lasers

Y2 - 23 September 2002 through 27 September 2002

ER -

Surface modification of high speed steels by diode laser remelting

Abstrakt

Obszary tematyczne ASJC Scopus

Uzyskaj dostęp do dokumentu

Inne pliki i linki

Fingerprint

Cytuj to