Preliminary Study on Mechanical Aspects of 3D-Printed PLA-TPU Composites

Alicja Żur; Paweł Żur; Piotr Michalski; Andrzej Baier

doi:10.3390/ma15072364

Preliminary Study on Mechanical Aspects of 3D-Printed PLA-TPU Composites

Silesian University of Technology

Wyniki badań: Wkład do czasopisma › Artykuł › recenzja

23 Cytowania z bazy Scopus

Abstrakt

Additive technologies using Fused Deposition Modeling (FDM) technology are currently a promising tool for the production of polymeric multicomposites. This paper presents the results of a static 3-point bending test carried out on 3D printed samples of the PLA-TPU composite. The article also discusses initial vibrodiagnostic research and Finite Element Method (FEM) analysis of the 3D-printed composite bushings. The data obtained from FEM analysis served as input data for motion simulation analysis, where the influence of the stiffness of the suspension on the trajectory has been verified.

Język oryginału	angielski
Numer artykułu	2364
Czasopismo	Materials
Tom	15
Numer wydania	7
Identyfikatory DOI	https://doi.org/10.3390/ma15072364
Status publikacji	Opublikowano - 1 kwi 2022

Cele SDG ONZ

Ten wynik przyczynia się do realizacji następujących celów zrównoważonego rozwoju

Cel 9 Przemysł, innowacje i infrastruktura

Obszary tematyczne ASJC Scopus

Materiałoznawstwo ogólne
Fizyka materii skondensowanej

Uzyskaj dostęp do dokumentu

10.3390/ma15072364

Inne pliki i linki

Link do publikacji w Scopus

Cytowanie

@article{cc568100284f4621ab7fcfe8529f3db5,

title = "Preliminary Study on Mechanical Aspects of 3D-Printed PLA-TPU Composites",

abstract = "Additive technologies using Fused Deposition Modeling (FDM) technology are currently a promising tool for the production of polymeric multicomposites. This paper presents the results of a static 3-point bending test carried out on 3D printed samples of the PLA-TPU composite. The article also discusses initial vibrodiagnostic research and Finite Element Method (FEM) analysis of the 3D-printed composite bushings. The data obtained from FEM analysis served as input data for motion simulation analysis, where the influence of the stiffness of the suspension on the trajectory has been verified.",

keywords = "3D printing, FDM, FEM analysis, composite, motion simulation, vibrodiagnostics",

author = "Alicja {\.Z}ur and Pawe{\l} {\.Z}ur and Piotr Michalski and Andrzej Baier",

note = "Publisher Copyright: {\textcopyright} 2022 by the authors. Licensee MDPI, Basel, Switzerland.",

year = "2022",

month = apr,

day = "1",

doi = "10.3390/ma15072364",

language = "English",

volume = "15",

journal = "Materials",

issn = "1996-1944",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "7",

}

TY - JOUR

T1 - Preliminary Study on Mechanical Aspects of 3D-Printed PLA-TPU Composites

AU - Żur, Alicja

AU - Żur, Paweł

AU - Michalski, Piotr

AU - Baier, Andrzej

PY - 2022/4/1

Y1 - 2022/4/1

N2 - Additive technologies using Fused Deposition Modeling (FDM) technology are currently a promising tool for the production of polymeric multicomposites. This paper presents the results of a static 3-point bending test carried out on 3D printed samples of the PLA-TPU composite. The article also discusses initial vibrodiagnostic research and Finite Element Method (FEM) analysis of the 3D-printed composite bushings. The data obtained from FEM analysis served as input data for motion simulation analysis, where the influence of the stiffness of the suspension on the trajectory has been verified.

AB - Additive technologies using Fused Deposition Modeling (FDM) technology are currently a promising tool for the production of polymeric multicomposites. This paper presents the results of a static 3-point bending test carried out on 3D printed samples of the PLA-TPU composite. The article also discusses initial vibrodiagnostic research and Finite Element Method (FEM) analysis of the 3D-printed composite bushings. The data obtained from FEM analysis served as input data for motion simulation analysis, where the influence of the stiffness of the suspension on the trajectory has been verified.

KW - 3D printing

KW - FDM

KW - FEM analysis

KW - composite

KW - motion simulation

KW - vibrodiagnostics

UR - https://www.scopus.com/pages/publications/85127603780

U2 - 10.3390/ma15072364

DO - 10.3390/ma15072364

M3 - Article

AN - SCOPUS:85127603780

SN - 1996-1944

VL - 15

JO - Materials

JF - Materials

IS - 7

M1 - 2364

ER -

Preliminary Study on Mechanical Aspects of 3D-Printed PLA-TPU Composites

Abstrakt

Cele SDG ONZ

Obszary tematyczne ASJC Scopus

Uzyskaj dostęp do dokumentu

Inne pliki i linki

Fingerprint

Cytowanie