Monitoring of the pulsation cycle in a jig using a radiometric density meter

Stanislaw Cierpisz; Jaroslaw Joostberens

doi:10.1051/e3sconf/20160801034

Monitoring of the pulsation cycle in a jig using a radiometric density meter

Stanislaw Cierpisz
, Jaroslaw Joostberens

Katedra Elektrotechniki i Automatyki Przemysłowej (RG/RG1)

Institute of Innovative Technologies EMAG

Wyniki badań: Wkład do czasopisma › Artykuł z konferencji › recenzja

Abstrakt

Application of a radiometric density meter to monitor changes in coal bed density during a pulsation cycle in a jig has been presented. The signal from the radiation detector has been filtered in an adaptive filter to react properly to rapid changes in density. The radiometric density meter has been used to measure density of a coal layer 3 cm thick and 30 cm wide. The distribution of the material density along the bed height has been measured during field tests performed on the industrial jig. Changes in density have shown the process of material loosening and its compression during each cycle of pulsations.

Język oryginału	angielski
Numer artykułu	01034
Czasopismo	E3S Web of Conferences
Tom	8
Identyfikatory DOI	https://doi.org/10.1051/e3sconf/20160801034
Status publikacji	Opublikowano - 16 wrz 2016
Wydarzenie	2016 Mineral Engineering Conference, MEC 2016 - Swieradow-Zdroj, Polska Czas trwania: 25 wrz 2016 → 28 wrz 2016

Obszary tematyczne ASJC Scopus

Ogólne nauki o środowisku
Energia ogólna
Ogólne nauki o Ziemi i planetach

Uzyskaj dostęp do dokumentu

10.1051/e3sconf/20160801034

Inne pliki i linki

Link do publikacji w Scopus

Cytowanie

@article{9014bbad520b4aa99da05be974de5640,

title = "Monitoring of the pulsation cycle in a jig using a radiometric density meter",

abstract = "Application of a radiometric density meter to monitor changes in coal bed density during a pulsation cycle in a jig has been presented. The signal from the radiation detector has been filtered in an adaptive filter to react properly to rapid changes in density. The radiometric density meter has been used to measure density of a coal layer 3 cm thick and 30 cm wide. The distribution of the material density along the bed height has been measured during field tests performed on the industrial jig. Changes in density have shown the process of material loosening and its compression during each cycle of pulsations.",

author = "Stanislaw Cierpisz and Jaroslaw Joostberens",

note = "Publisher Copyright: {\textcopyright} The Authors, published by EDP Sciences.; 2016 Mineral Engineering Conference, MEC 2016 ; Conference date: 25-09-2016 Through 28-09-2016",

year = "2016",

month = sep,

day = "16",

doi = "10.1051/e3sconf/20160801034",

language = "English",

volume = "8",

journal = "E3S Web of Conferences",

issn = "2267-1242",

publisher = "EDP Sciences",

}

TY - JOUR

T1 - Monitoring of the pulsation cycle in a jig using a radiometric density meter

AU - Cierpisz, Stanislaw

AU - Joostberens, Jaroslaw

PY - 2016/9/16

Y1 - 2016/9/16

N2 - Application of a radiometric density meter to monitor changes in coal bed density during a pulsation cycle in a jig has been presented. The signal from the radiation detector has been filtered in an adaptive filter to react properly to rapid changes in density. The radiometric density meter has been used to measure density of a coal layer 3 cm thick and 30 cm wide. The distribution of the material density along the bed height has been measured during field tests performed on the industrial jig. Changes in density have shown the process of material loosening and its compression during each cycle of pulsations.

AB - Application of a radiometric density meter to monitor changes in coal bed density during a pulsation cycle in a jig has been presented. The signal from the radiation detector has been filtered in an adaptive filter to react properly to rapid changes in density. The radiometric density meter has been used to measure density of a coal layer 3 cm thick and 30 cm wide. The distribution of the material density along the bed height has been measured during field tests performed on the industrial jig. Changes in density have shown the process of material loosening and its compression during each cycle of pulsations.

UR - https://www.scopus.com/pages/publications/85017015849

U2 - 10.1051/e3sconf/20160801034

DO - 10.1051/e3sconf/20160801034

M3 - Conference article

AN - SCOPUS:85017015849

SN - 2267-1242

VL - 8

JO - E3S Web of Conferences

JF - E3S Web of Conferences

M1 - 01034

T2 - 2016 Mineral Engineering Conference, MEC 2016

Y2 - 25 September 2016 through 28 September 2016

ER -

Monitoring of the pulsation cycle in a jig using a radiometric density meter

Abstrakt

Obszary tematyczne ASJC Scopus

Uzyskaj dostęp do dokumentu

Inne pliki i linki

Fingerprint

Cytowanie