Microstructure characterization of high Mn-Al steel after hot compression tests

Magdalena Barbara Jabłońska

doi:10.1007/978-3-319-04639-6_16

Microstructure characterization of high Mn-Al steel after hot compression tests

Magdalena Barbara Jabłońska

Katedra Technologii Materiałowych (RM/RM3)

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

Abstrakt

In last year’s numerous research centres have been focused to the development of Mn-Al belong to the novel AHSS steels for the automotive and railway industry. The X55MnAl25-5 high manganese steel belong to these group demonstrate a dominant stress mechanism known as Twining Induced Plasticity (TWIP), which occurred as a main mechanism of plastic deformation, strongly dependent on Stacking Fault Energy (SFE). Moreover, these steels reveal a high yield stress and very high total elongation from. Properties of these steels predispose it to be used as constructional elements in automobile industry, which are characterized by a great energy reserve, absorbed during plastic deformation (vehicle collision) and high rigidity. This paper presents the results of applied methods of SEM/EBSD techniques for characterize the structure of high manganese steel after deformation by compression tests, with various deformation parameters like temperature and strain rate. Applied methods revealed the influence of deformation parameters on grain size, fraction of twinned grains and misorientation angles. The obtained results can be used for the development of this steels and their plastic deformation models.

Język oryginału	angielski
Tytuł publikacji goszczącej	International Multidisciplinary Microscopy Congress - Proceedings of InterM
Redaktorzy	Efstathios K. Polychroniadis, Mehmet Ozer, Ahmet Yavuz Oral
Wydawca	Springer Science and Business Media, LLC
Strony	113-120
Liczba stron	8
ISBN (elektroniczny)	9783319046389
Identyfikatory DOI	https://doi.org/10.1007/978-3-319-04639-6_16
Status publikacji	Opublikowano - 2014
Wydarzenie	1st International Multidisciplinary Microscopy Congress, INTERM 2013 - Antalya, Turcja Czas trwania: 10 paź 2013 → 13 paź 2013

Seria publikacji

Nazwa	Springer Proceedings in Physics
Tom	154
ISSN (drukowany)	0930-8989
ISSN (elektroniczny)	1867-4941

Konferencja

Konferencja	1st International Multidisciplinary Microscopy Congress, INTERM 2013
Kraj/Terytorium	Turcja
Miejscowość	Antalya
Okres	10/10/13 → 13/10/13

Cele SDG ONZ

Ten wynik przyczynia się do realizacji następujących celów zrównoważonego rozwoju

Cel 3 Dobre zdrowie i dobre samopoczucie

Obszary tematyczne ASJC Scopus

Ogólna fizyka i astronomia

Uzyskaj dostęp do dokumentu

10.1007/978-3-319-04639-6_16

Inne pliki i linki

Link do publikacji w Scopus

Cytowanie

Jabłońska, M. B. (2014). Microstructure characterization of high Mn-Al steel after hot compression tests. W E. K. Polychroniadis, M. Ozer, & A. Y. Oral (Red.), International Multidisciplinary Microscopy Congress - Proceedings of InterM (str. 113-120). (Springer Proceedings in Physics; Tom 154). Springer Science and Business Media, LLC. https://doi.org/10.1007/978-3-319-04639-6_16

@inproceedings{bbf762264ee44284ae654bd7791f11a3,

title = "Microstructure characterization of high Mn-Al steel after hot compression tests",

abstract = "In last year{\textquoteright}s numerous research centres have been focused to the development of Mn-Al belong to the novel AHSS steels for the automotive and railway industry. The X55MnAl25-5 high manganese steel belong to these group demonstrate a dominant stress mechanism known as Twining Induced Plasticity (TWIP), which occurred as a main mechanism of plastic deformation, strongly dependent on Stacking Fault Energy (SFE). Moreover, these steels reveal a high yield stress and very high total elongation from. Properties of these steels predispose it to be used as constructional elements in automobile industry, which are characterized by a great energy reserve, absorbed during plastic deformation (vehicle collision) and high rigidity. This paper presents the results of applied methods of SEM/EBSD techniques for characterize the structure of high manganese steel after deformation by compression tests, with various deformation parameters like temperature and strain rate. Applied methods revealed the influence of deformation parameters on grain size, fraction of twinned grains and misorientation angles. The obtained results can be used for the development of this steels and their plastic deformation models.",

author = "Jab{\l}o{\'n}ska, \{Magdalena Barbara\}",

note = "Publisher Copyright: {\textcopyright} Springer International Publishing Switzerland 2014.; 1st International Multidisciplinary Microscopy Congress, INTERM 2013 ; Conference date: 10-10-2013 Through 13-10-2013",

year = "2014",

doi = "10.1007/978-3-319-04639-6\_16",

language = "English",

series = "Springer Proceedings in Physics",

publisher = "Springer Science and Business Media, LLC",

pages = "113--120",

editor = "Polychroniadis, \{Efstathios K.\} and Mehmet Ozer and Oral, \{Ahmet Yavuz\}",

booktitle = "International Multidisciplinary Microscopy Congress - Proceedings of InterM",

address = "United States",

}

Jabłońska, MB 2014, Microstructure characterization of high Mn-Al steel after hot compression tests. w EK Polychroniadis, M Ozer & AY Oral (red), International Multidisciplinary Microscopy Congress - Proceedings of InterM. Springer Proceedings in Physics, tom 154, Springer Science and Business Media, LLC, str. 113-120, 1st International Multidisciplinary Microscopy Congress, INTERM 2013, Antalya, Turcja, 10/10/13. https://doi.org/10.1007/978-3-319-04639-6_16

Microstructure characterization of high Mn-Al steel after hot compression tests. / Jabłońska, Magdalena Barbara.
International Multidisciplinary Microscopy Congress - Proceedings of InterM. red. / Efstathios K. Polychroniadis; Mehmet Ozer; Ahmet Yavuz Oral. Springer Science and Business Media, LLC, 2014. str. 113-120 (Springer Proceedings in Physics; Tom 154).

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

TY - GEN

T1 - Microstructure characterization of high Mn-Al steel after hot compression tests

AU - Jabłońska, Magdalena Barbara

PY - 2014

Y1 - 2014

N2 - In last year’s numerous research centres have been focused to the development of Mn-Al belong to the novel AHSS steels for the automotive and railway industry. The X55MnAl25-5 high manganese steel belong to these group demonstrate a dominant stress mechanism known as Twining Induced Plasticity (TWIP), which occurred as a main mechanism of plastic deformation, strongly dependent on Stacking Fault Energy (SFE). Moreover, these steels reveal a high yield stress and very high total elongation from. Properties of these steels predispose it to be used as constructional elements in automobile industry, which are characterized by a great energy reserve, absorbed during plastic deformation (vehicle collision) and high rigidity. This paper presents the results of applied methods of SEM/EBSD techniques for characterize the structure of high manganese steel after deformation by compression tests, with various deformation parameters like temperature and strain rate. Applied methods revealed the influence of deformation parameters on grain size, fraction of twinned grains and misorientation angles. The obtained results can be used for the development of this steels and their plastic deformation models.

AB - In last year’s numerous research centres have been focused to the development of Mn-Al belong to the novel AHSS steels for the automotive and railway industry. The X55MnAl25-5 high manganese steel belong to these group demonstrate a dominant stress mechanism known as Twining Induced Plasticity (TWIP), which occurred as a main mechanism of plastic deformation, strongly dependent on Stacking Fault Energy (SFE). Moreover, these steels reveal a high yield stress and very high total elongation from. Properties of these steels predispose it to be used as constructional elements in automobile industry, which are characterized by a great energy reserve, absorbed during plastic deformation (vehicle collision) and high rigidity. This paper presents the results of applied methods of SEM/EBSD techniques for characterize the structure of high manganese steel after deformation by compression tests, with various deformation parameters like temperature and strain rate. Applied methods revealed the influence of deformation parameters on grain size, fraction of twinned grains and misorientation angles. The obtained results can be used for the development of this steels and their plastic deformation models.

UR - https://www.scopus.com/pages/publications/84927658776

U2 - 10.1007/978-3-319-04639-6_16

DO - 10.1007/978-3-319-04639-6_16

M3 - Conference contribution

AN - SCOPUS:84927658776

T3 - Springer Proceedings in Physics

SP - 113

EP - 120

BT - International Multidisciplinary Microscopy Congress - Proceedings of InterM

A2 - Polychroniadis, Efstathios K.

A2 - Ozer, Mehmet

A2 - Oral, Ahmet Yavuz

PB - Springer Science and Business Media, LLC

T2 - 1st International Multidisciplinary Microscopy Congress, INTERM 2013

Y2 - 10 October 2013 through 13 October 2013

ER -

Microstructure characterization of high Mn-Al steel after hot compression tests

Abstrakt

Seria publikacji

Konferencja

Cele SDG ONZ

Obszary tematyczne ASJC Scopus

Uzyskaj dostęp do dokumentu

Inne pliki i linki

Fingerprint

Cytowanie