Przeskocz do nawigacji głównej Przeskocz do wyszukiwania Przeskocz do głównej treści

Kinetics of static recrystallization in the coarse-grained Fe–40 at.%Al–Zr–B alloy

  • Ivo Schindler
  • , Jaromir Kopecček
  • , Petr Kawulok
  • , Magdalena Jabłońska
  • , Eugeniusz Hadasik
  • , Pawel Jóźwik
  • , Petr Opěla
  • , Pawel Hanus
  • , Wojciech Polkowski
  • , Zbigniew Bojar
  • VŠB – Technical University of Ostrava
  • Czech Academy of Sciences
  • Military University of Technology Warsaw
  • Technical University of Liberec

Wyniki badań: Wkład do czasopisma › Artykuł › recenzja

4 Cytowania z bazy Scopus

Abstrakt

The aim of works was to describe mathematically the kinetics of static recrystallization of the alloy type Fe–40 at.%Al–Zr–B (with 24.6 Al–0.01 B–0.18 Zr–0.01 C in wt.%) with the coarse-grained structure. The microstructure of the laboratory castings made of this extremely brittle alloy was homogenized by hot rolling of the material in the protective capsules and by the long-term annealing at 1200 °C. An initial microstructure with average grain size 0.77 ± 0.27 mm was obtained. Based on the isothermal plastic deformation tests and EBSD analysis, the static recrystallization kinetics of the prepared coarse-grained B2 iron aluminide after strain 0.20 was mathematically described. Recrystallized fraction depends on deformation/annealing temperature (900–1100 °C) as well as on annealing time. The activation energy of static recrystallization was calculated as 255 kJ mol−1. Competition between dynamic recovery and static recrystallization was proved after strain 0.35 and annealing temperature 1100 °C. Static recrystallization starts relatively easily in the studied alloy, but a very long-term annealing is quite necessary for the complete course of recrystallization. The mean size of recrystallized grains falls with the decreasing annealing temperature (0.47 ± 0.15 mm for temperature 1100 °C, and 0.22 ± 0.04 mm for 900 °C). Even at a temperature of 1200 °C the annealing after deformation should last approx. 1 min for obtaining the fully recrystallized microstructure. That is why the standard hot forming technologies should be combined by an interpass annealing in order to refine sufficiently the coarse grains.

Język oryginałuangielski
Strony (od–do)816-826
Liczba stron11
CzasopismoArchives of Civil and Mechanical Engineering
Tom17
Numer wydania4
Identyfikatory DOI
Status publikacjiOpublikowano - 1 wrz 2017

Obszary tematyczne ASJC Scopus

  • Inżynieria lądowa i strukturalna
  • Inżynieria mechaniczna

Fingerprint

Zanurz się w tematy badawcze publikacji „Kinetics of static recrystallization in the coarse-grained Fe–40 at.%Al–Zr–B alloy”. Razem tworzą niepowtarzalny odcisk palca.

Cytowanie