Przeskocz do nawigacji głównej Przeskocz do wyszukiwania Przeskocz do głównej treści

Kinetics of austenite phase transformations in newly-developed 0.17c-2mn-1si-0.2mo forging steel with ti and v microadditions

Wyniki badań: Wkład do czasopisma › Artykuł › recenzja

9 Cytowania z bazy Scopus

Abstrakt

This work presents the results of phase transformation kinetics during continuous cooling in newly developed high strength low-alloy steel (HSLA). Initial theoretical calculations for the determination of heat treatment parameters were conducted. To determine the structural constituents formed due to the austenite decomposition the dilatometry approach was used. The material was cooled down from the austenitization temperature of 1000◦ C with cooling rates between 0.1◦ C/s to 60◦ C/s. Then, light and scanning electron microscopy investigations were carried out. The microstructure after cooling at rates between 0.1◦ C/s up to 1◦ C/s is mainly ferritic with some fraction of granular bainite. Increasing the cooling rate led to formation of a higher fraction of bainitic ferrite. At 60◦ C/s the microstructure was mainly bainite with some fraction of ferrite. To determine the presence of retained austenite, color etching using Klemm solution was used. The results show that the increase of cooling rate decreases the amount of retained austenite in the microstructure of the steel. Hardness measurements were made to determine the changes in the mechanical properties as a function of the cooling rate.

Język oryginałuangielski
Numer artykułu1698
CzasopismoMaterials
Tom14
Numer wydania7
Identyfikatory DOI
Status publikacjiOpublikowano - 1 kwi 2021

Obszary tematyczne ASJC Scopus

  • Materiałoznawstwo ogólne
  • Fizyka materii skondensowanej

Fingerprint

Zanurz się w tematy badawcze publikacji „Kinetics of austenite phase transformations in newly-developed 0.17c-2mn-1si-0.2mo forging steel with ti and v microadditions”. Razem tworzą niepowtarzalny odcisk palca.

Cytowanie