Investment casting design and processing for drone’s micro-engine turbine rotor manufacturing

Stanisław Roskosz; Dariusz Szeliga; Rafał Cygan; Paweł Rokicki

doi:10.4028/www.scientific.net/SSP.246.189

Investment casting design and processing for drone’s micro-engine turbine rotor manufacturing

Stanisław Roskosz
, Dariusz Szeliga
, Rafał Cygan
, Paweł Rokicki

Politechnika Śląska (PŚ)

Rzeszów University of Technology
WSK “PZL - Rzeszów” S.A

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

5 Cytowania z bazy Scopus

Abstrakt

The research presents methods for modern design and processing tools to be used in manufacturing process of castings in the aviation industry. In the study it is described how to use a computer simulation software and rapid prototyping / rapid tooling methods for manufacturing of drone’s micro-engine turbine rotor. The computer simulation of flow and solidification process and the investment casting technology were applied for manufactured elements.

Język oryginału	angielski
Tytuł publikacji goszczącej	Technologies and Properties of Modern Utility Materials XXIII
Redaktorzy	Agnieszka Szczotok, Agnieszka Szkliniarz, Jacek Mendala
Wydawca	Trans Tech Publications Ltd.
Strony	189-192
Liczba stron	4
ISBN (drukowany)	9783038355212
Identyfikatory DOI	https://doi.org/10.4028/www.scientific.net/SSP.246.189
Status publikacji	Opublikowano - 2016
Wydarzenie	23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015 - Katowice, Polska Czas trwania: 15 maj 2015 → 15 maj 2015

Seria publikacji

Nazwa	Solid State Phenomena
Tom	246
ISSN (drukowany)	1012-0394
ISSN (elektroniczny)	1662-9779

Konferencja

Konferencja	23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015
Kraj/Terytorium	Polska
Miejscowość	Katowice
Okres	15/05/15 → 15/05/15

Cele SDG ONZ

Ten wynik przyczynia się do realizacji następujących celów zrównoważonego rozwoju

Cel 9 Przemysł, innowacje i infrastruktura

Obszary tematyczne ASJC Scopus

Fizyka atomowa i molekularna oraz optyka
Materiałoznawstwo ogólne
Fizyka materii skondensowanej

Uzyskaj dostęp do dokumentu

10.4028/www.scientific.net/SSP.246.189

Inne pliki i linki

Link do publikacji w Scopus

Cytowanie

Roskosz, S., Szeliga, D., Cygan, R., & Rokicki, P. (2016). Investment casting design and processing for drone’s micro-engine turbine rotor manufacturing. W A. Szczotok, A. Szkliniarz, & J. Mendala (Red.), Technologies and Properties of Modern Utility Materials XXIII (str. 189-192). (Solid State Phenomena; Tom 246). Trans Tech Publications Ltd.. https://doi.org/10.4028/www.scientific.net/SSP.246.189

@inproceedings{387b193100fb475bbebe6afc44b28f78,

title = "Investment casting design and processing for drone{\textquoteright}s micro-engine turbine rotor manufacturing",

abstract = "The research presents methods for modern design and processing tools to be used in manufacturing process of castings in the aviation industry. In the study it is described how to use a computer simulation software and rapid prototyping / rapid tooling methods for manufacturing of drone{\textquoteright}s micro-engine turbine rotor. The computer simulation of flow and solidification process and the investment casting technology were applied for manufactured elements.",

keywords = "Investment casting, Nickel based superalloy IN 713C, Turbine{\textquoteright}s rotor",

author = "Stanis{\l}aw Roskosz and Dariusz Szeliga and Rafa{\l} Cygan and Pawe{\l} Rokicki",

note = "Publisher Copyright: {\textcopyright} 2016 Trans Tech Publications.; 23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015 ; Conference date: 15-05-2015 Through 15-05-2015",

year = "2016",

doi = "10.4028/www.scientific.net/SSP.246.189",

language = "English",

isbn = "9783038355212",

series = "Solid State Phenomena",

publisher = "Trans Tech Publications Ltd.",

pages = "189--192",

editor = "Agnieszka Szczotok and Agnieszka Szkliniarz and Jacek Mendala",

booktitle = "Technologies and Properties of Modern Utility Materials XXIII",

address = "Switzerland",

}

Roskosz, S, Szeliga, D, Cygan, R & Rokicki, P 2016, Investment casting design and processing for drone’s micro-engine turbine rotor manufacturing. w A Szczotok, A Szkliniarz & J Mendala (red), Technologies and Properties of Modern Utility Materials XXIII. Solid State Phenomena, tom 246, Trans Tech Publications Ltd., str. 189-192, 23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015, Katowice, Polska, 15/05/15. https://doi.org/10.4028/www.scientific.net/SSP.246.189

Investment casting design and processing for drone’s micro-engine turbine rotor manufacturing. / Roskosz, Stanisław; Szeliga, Dariusz; Cygan, Rafał i in.
Technologies and Properties of Modern Utility Materials XXIII. red. / Agnieszka Szczotok; Agnieszka Szkliniarz; Jacek Mendala. Trans Tech Publications Ltd., 2016. str. 189-192 (Solid State Phenomena; Tom 246).

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

TY - GEN

T1 - Investment casting design and processing for drone’s micro-engine turbine rotor manufacturing

AU - Roskosz, Stanisław

AU - Szeliga, Dariusz

AU - Cygan, Rafał

AU - Rokicki, Paweł

PY - 2016

Y1 - 2016

N2 - The research presents methods for modern design and processing tools to be used in manufacturing process of castings in the aviation industry. In the study it is described how to use a computer simulation software and rapid prototyping / rapid tooling methods for manufacturing of drone’s micro-engine turbine rotor. The computer simulation of flow and solidification process and the investment casting technology were applied for manufactured elements.

AB - The research presents methods for modern design and processing tools to be used in manufacturing process of castings in the aviation industry. In the study it is described how to use a computer simulation software and rapid prototyping / rapid tooling methods for manufacturing of drone’s micro-engine turbine rotor. The computer simulation of flow and solidification process and the investment casting technology were applied for manufactured elements.

KW - Investment casting

KW - Nickel based superalloy IN 713C

KW - Turbine’s rotor

UR - https://www.scopus.com/pages/publications/84959165201

U2 - 10.4028/www.scientific.net/SSP.246.189

DO - 10.4028/www.scientific.net/SSP.246.189

M3 - Conference contribution

AN - SCOPUS:84959165201

SN - 9783038355212

T3 - Solid State Phenomena

SP - 189

EP - 192

BT - Technologies and Properties of Modern Utility Materials XXIII

A2 - Szczotok, Agnieszka

A2 - Szkliniarz, Agnieszka

A2 - Mendala, Jacek

PB - Trans Tech Publications Ltd.

T2 - 23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015

Y2 - 15 May 2015 through 15 May 2015

ER -

Roskosz S, Szeliga D, Cygan R, Rokicki P. Investment casting design and processing for drone’s micro-engine turbine rotor manufacturing. W Szczotok A, Szkliniarz A, Mendala J, redaktorzy, Technologies and Properties of Modern Utility Materials XXIII. Trans Tech Publications Ltd. 2016. str. 189-192. (Solid State Phenomena). doi: 10.4028/www.scientific.net/SSP.246.189

Investment casting design and processing for drone’s micro-engine turbine rotor manufacturing

Abstrakt

Seria publikacji

Konferencja

Cele SDG ONZ

Obszary tematyczne ASJC Scopus

Uzyskaj dostęp do dokumentu

Inne pliki i linki

Fingerprint

Cytowanie