Przeskocz do nawigacji głównej Przeskocz do wyszukiwania Przeskocz do głównej treści

Hot-working behaviour of advanced high-manganese C-Mn-Si-Al steels

  • Silesian University of Technology

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

27 Cytowania z bazy Scopus

Abstrakt

The high-manganese austenitic steels are an answer for new demands of automotive industry concerning the safety of passengers by the use of materials absorbing high values of energy during collisions. The chemical compositions of two high-manganese austenitic steels containing various Al and Si concentrations were developed. Additionally, the steels were microalloyed by Nb and Ti in order to control the grain growth under hot-working conditions. The influence of hot-working conditions on a recrystallization behaviour was investigated. Flow stresses during the multistage compression test were measured using the Gleeble 3800 thermo-mechanical simulator. To describe the hot-working behaviour, the steel was compressed to the various amount of deformation (4×0.29, 4×0.23 and 4×0.19). The microstructure evolution in successive stages of deformation was determined in metallographic investigations using light microscopy. The flow stresses are much higher in comparison with austenitic Cr-Ni and Cr-Mn steels and slightly higher compared to Fe-(15-25) Mn alloys. Making use of dynamic and metadynamic recrystallization, it is possible to refine the microstructure and to decrease the flow stress during the last deformation at 850°C. Applying the true strains of 0.23 and 0.19 requires the microstructure refinement by static recrystallization. The obtained microstructure - hot-working relationships can be useful in the determination of powerful parameters of hot-rolling and to design a rolling schedule for high-manganese steel sheets with fine-grained austenitic structures.

Język oryginałuangielski
Tytuł publikacji goszczącejPRICM7
WydawcaTrans Tech Publications Ltd.
Strony266-270
Liczba stron5
ISBN (drukowany)0878492550, 9780878492558
Identyfikatory DOI
Status publikacjiOpublikowano - 2010
Wydarzenie7th Pacific Rim International Conference on Advanced Materials and Processing, PRICM-7 - Cairns, QLD, Australia
Czas trwania: 2 sie 2010 → 6 sie 2010

Seria publikacji

NazwaMaterials Science Forum
Tom654-656
ISSN (drukowany)0255-5476
ISSN (elektroniczny)1662-9752

Konferencja

Konferencja7th Pacific Rim International Conference on Advanced Materials and Processing, PRICM-7
Kraj/TerytoriumAustralia
MiejscowośćCairns, QLD
Okres2/08/10 → 6/08/10

Obszary tematyczne ASJC Scopus

  • Materiałoznawstwo ogólne
  • Fizyka materii skondensowanej
  • Mechanika materiałowa
  • Inżynieria mechaniczna

Fingerprint

Zanurz się w tematy badawcze publikacji „Hot-working behaviour of advanced high-manganese C-Mn-Si-Al steels”. Razem tworzą niepowtarzalny odcisk palca.

Cytowanie