FEM‐Based Thermogram Correction for Inconel 625 Joint Hardness Clustering

Assessing the temperature of the joint in on‐line mode is a vital task that is demanded to characterize the formations of terns formations that are taking place in a joint and result in reaching necessary properties of the joint. Arc welding generates a high amount of heat that is reflected by the metallic surface of the welded object. In the paper, a temperature measurement credibility in-crease method is described and evaluated. The proposed method is used to reduce the influence of the reflected temperature of the hot torch and the arc on the temperature distribution observed on the surface of the welded joint using an infrared camera. The elaborated approach is based on com-parison between infrared observation of the solidifying weld and precisely performed finite element method (FEM) simulation. The FEM simulations were calibrated according to the geometry of the fusion zone. It allows to precisely model heat source properties. The best‐reflected temperature correction map was selected and applied to obtain a temperature representation that differs from the FEM baseline by less than 10 °C. Precise temperature values allowed us to cluster welded joints in 3D feature space (temperature, hardness, linear energy). It was found that by using the k‐means clustering method it is possible to distinguish between correct and faulty (in terms of too low mechanical properties) joints.