Przeskocz do nawigacji głównej Przeskocz do wyszukiwania Przeskocz do głównej treści

Evolution of the microstructure and mechanical properties of Sanicro 25 austenitic stainless steel after long-term ageing

  • Upper Silesian Institute of Technology
  • Częstochowa University of Technology
  • University of Zilina

Wyniki badań: Wkład do czasopisma › Artykuł › recenzja

11 Cytowania z bazy Scopus

Abstrakt

A newly developed heat-resistant austenitic steel, Sanicro 25 is currently considered the leading candidate material for an advanced ultra-supercritical installation. The test material was subjected to long-term ageing (up to 30,000 h) at 700 and 750 °C, after which investigations into the microstructure, identification of precipitates, and testing of mechanical properties were conducted. Sanicro 25 had an austenitic microstructure with annealed twins and numerous large primary NbX and Z-phase precipitates in the as-received condition. It was found that the long-term ageing of the steel resulted in numerous precipitation processes. For example, M23C6 carbides, Laves, σ and G phases occurred at the grain boundaries. However, Z-phase precipitates, ε_Cu particles, and Laves phase were observed inside the grains. At the same time, compound complexes of precipitates based on the primary Z-phase precipitates were revealed in the microstructure. The ageing process increased the particle size of M23C6 carbides and the σ phase. After longer ageing times, a precipitate-free zone (PFZ) near the grain boundaries was observed. The precipitation processes initially lead to an increase in the strength properties of the steel. However, after 5000 h, an over-ageing effect was observed at 750 °C, which was not observed at 700 °C.

Język oryginałuangielski
Numer artykułu149
CzasopismoArchives of Civil and Mechanical Engineering
Tom23
Numer wydania3
Identyfikatory DOI
Status publikacjiOpublikowano - sie 2023

Obszary tematyczne ASJC Scopus

  • Inżynieria lądowa i strukturalna
  • Inżynieria mechaniczna

Fingerprint

Zanurz się w tematy badawcze publikacji „Evolution of the microstructure and mechanical properties of Sanicro 25 austenitic stainless steel after long-term ageing”. Razem tworzą niepowtarzalny odcisk palca.

Cytowanie