Przeskocz do nawigacji głównej Przeskocz do wyszukiwania Przeskocz do głównej treści

Effect of HPC and FRHPC precast heads on punching shear resistance of flat plates

  • Silesian University of Technology

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

2 Cytowania z bazy Scopus

Abstrakt

To improve punching shear capacity of slab-column connections, and to replace other kinds of strengthening, the composite joints were introduced. The idea is to use combined head-and-column precast members and cast on site remaining parts of slabs. Following this general idea the precast parts from high performance concrete (HPC) and fiber reinforced high-performance concrete (FRHPC) were introduced. The tests of such axi-symmetrical joints were done by the authors. The first two series of models with the composite joints were tested to compare results and behavior of connections with HPC precast heads and formerly tested models with prefabricates from ordinary concrete. The size of models was 2.7 ' 2.7 m, with a total slab thickness of 0.26 m. Three different sizes and two shapes of heads - circular and square - were used in the tests. The final series of models was prepared with FRHPC heads. Each series contained four models, so the experimental data from 16 tests are presented. The heads from FRHPC appeared satisfactory to carry punching forces over two times greater than heads from the same HPC without fibers. Advantages from use of FRHPC head-and-column precast members have been confirmed in multi-phase failure as well as in the significant increment of punching shear capacity of connections. On the basis of experiments, the analytical model of punching failure was calibrated. This model is taking into account the recent simplified physical models for homogenous slab-column connections and the failure criterion based on facture mechanics.

Język oryginałuangielski
Tytuł publikacji goszczącejPunching Shear in Reinforced Concrete Slabs
RedaktorzyMaria Anna Polak
WydawcaAmerican Concrete Institute
Strony277-298
Liczba stron22
ISBN (elektroniczny)9780870311932
Status publikacjiOpublikowano - 1 paź 2005
WydarzenieSymposium on Punching Shear in Reinforced Concrete Slabs 2005, held at the ACI Fall 2005 Convention - Kansas City, Stany Zjednoczone
Czas trwania: 6 lis 2005 → 10 lis 2005

Seria publikacji

NazwaAmerican Concrete Institute, ACI Special Publication
TomSP-232
ISSN (drukowany)0193-2527

Konferencja

KonferencjaSymposium on Punching Shear in Reinforced Concrete Slabs 2005, held at the ACI Fall 2005 Convention
Kraj/TerytoriumStany Zjednoczone
MiejscowośćKansas City
Okres6/11/05 → 10/11/05

Obszary tematyczne ASJC Scopus

  • Inżynieria lądowa i strukturalna
  • Budownictwo
  • Materiałoznawstwo ogólne

Fingerprint

Zanurz się w tematy badawcze publikacji „Effect of HPC and FRHPC precast heads on punching shear resistance of flat plates”. Razem tworzą niepowtarzalny odcisk palca.

Cytowanie