Abstrakt
The influence of elevated deformation temperatures on the relationships between the microstructure and mechanical properties in a hot-rolled Si-Al-alloyed transformation-induced plasticity (TRIP)-aided steel was studied in a static tensile test. The morphological features of specimens deformed at the different temperatures were characterized by different microstructural techniques: optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM). An increase in the deformation temperature from 20 to 200◦C resulted in the reduced effectiveness of the TRIP effect, due to the increasing mechanical stability of the γ phase. The gradual transformation of retained austenite into martensite expressed by a progressive increase in the work hardening exponent (n) led to a beneficial balance of strength, uniform elongation and total elongation. The best product of UTS × TEl = 17,805 MPa% showed the sample deformed at 20◦C with a peak n value amounting to 0.3.
| Język oryginału | angielski |
|---|---|
| Numer artykułu | 5284 |
| Strony (od–do) | 1-14 |
| Liczba stron | 14 |
| Czasopismo | Materials |
| Tom | 13 |
| Numer wydania | 22 |
| Identyfikatory DOI | |
| Status publikacji | Opublikowano - 2 lis 2020 |
Obszary tematyczne ASJC Scopus
- Materiałoznawstwo ogólne
- Fizyka materii skondensowanej
Fingerprint
Zanurz się w tematy badawcze publikacji „Effect of elevated deformation temperatures on microstructural and tensile behavior of si-al alloyed trip-aided steel”. Razem tworzą niepowtarzalny odcisk palca.Cytowanie
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver