Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution Processes

Michał Frątczak; Paweł Nowak; Tomasz Kłopot; Jacek Czeczot; Szymon Bysko; Sara Bysko

doi:10.1007/978-3-030-40971-5_7

Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution Processes

Katedra Automatyki i Robotyki (RAU/RAU3)

ul.

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

4 Cytowania z bazy Scopus

Abstrakt

This paper deals with the validation of the concept of the component-based simulation tool and its application for virtual commissioning of the industrial control systems. It is shown how to decompose the heat exchange and distribution system into the general-purpose components and then how to use these components for designing the component-based simulator of the process, which is suitable to use in virtual commissioning environment. Simulator is based on SIMULINK and WinMOD. General hardware configuration and logical layers of the experimental setup, which was used during the experiments, are shown and described in details. Then, this simulator is tested for its simulation accuracy and the hardware experimental setup is tested for its applicability for virtual commissioning of the control systems for continuous dynamical processes of medium and high complexity. Communications lags between examined control system and simulator are analyzed due to checking whether the experiment results obtained depend of simulator’s time scaling factor.

Język oryginału	angielski
Tytuł publikacji goszczącej	Automation 2020
Podtytuł publikacji goszczącej	Towards Industry of the Future - Proceedings of Automation
Redaktorzy	Roman Szewczyk, Cezary Zielinski, Malgorzata Kaliczynska
Wydawca	Springer
Strony	67-77
Liczba stron	11
ISBN (drukowany)	9783030409708
Identyfikatory DOI	https://doi.org/10.1007/978-3-030-40971-5_7
Status publikacji	Opublikowano - 2020
Wydarzenie	International Conference on Automation, AUTOMATION 2020 - Warsaw, Polska Czas trwania: 18 mar 2020 → 20 mar 2020

Seria publikacji

Nazwa	Advances in Intelligent Systems and Computing
Tom	1140 AISC
ISSN (drukowany)	2194-5357
ISSN (elektroniczny)	2194-5365

Konferencja

Konferencja	International Conference on Automation, AUTOMATION 2020
Kraj/Terytorium	Polska
Miejscowość	Warsaw
Okres	18/03/20 → 20/03/20

Cele SDG ONZ

Ten wynik przyczynia się do realizacji następujących celów zrównoważonego rozwoju

Cel 9 Przemysł, innowacje i infrastruktura

Obszary tematyczne ASJC Scopus

Inżynieria sterowania i systemów
Informatyka ogólna

Uzyskaj dostęp do dokumentu

10.1007/978-3-030-40971-5_7

Inne pliki i linki

Link do publikacji w Scopus

Cytowanie

Frątczak, M., Nowak, P., Kłopot, T., Czeczot, J., Bysko, S., & Bysko, S. (2020). Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution Processes. W R. Szewczyk, C. Zielinski, & M. Kaliczynska (Red.), Automation 2020: Towards Industry of the Future - Proceedings of Automation (str. 67-77). (Advances in Intelligent Systems and Computing; Tom 1140 AISC). Springer. https://doi.org/10.1007/978-3-030-40971-5_7

Frątczak, Michał ; Nowak, Paweł ; Kłopot, Tomasz i in. / Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution Processes. Automation 2020: Towards Industry of the Future - Proceedings of Automation. redaktor / Roman Szewczyk ; Cezary Zielinski ; Malgorzata Kaliczynska. Springer, 2020. str. 67-77 (Advances in Intelligent Systems and Computing).

@inproceedings{85adb64e8a5a4721966b4acaf0b1a0e0,

title = "Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution Processes",

abstract = "This paper deals with the validation of the concept of the component-based simulation tool and its application for virtual commissioning of the industrial control systems. It is shown how to decompose the heat exchange and distribution system into the general-purpose components and then how to use these components for designing the component-based simulator of the process, which is suitable to use in virtual commissioning environment. Simulator is based on SIMULINK and WinMOD. General hardware configuration and logical layers of the experimental setup, which was used during the experiments, are shown and described in details. Then, this simulator is tested for its simulation accuracy and the hardware experimental setup is tested for its applicability for virtual commissioning of the control systems for continuous dynamical processes of medium and high complexity. Communications lags between examined control system and simulator are analyzed due to checking whether the experiment results obtained depend of simulator{\textquoteright}s time scaling factor.",

keywords = "Heat exchange and distribution systems, Library components, Modeling and simulation, Virtual commissioning",

author = "Micha{\l} Fr{\c a}tczak and Pawe{\l} Nowak and Tomasz K{\l}opot and Jacek Czeczot and Szymon Bysko and Sara Bysko",

note = "Publisher Copyright: {\textcopyright} 2020, Springer Nature Switzerland AG.; International Conference on Automation, AUTOMATION 2020 ; Conference date: 18-03-2020 Through 20-03-2020",

year = "2020",

doi = "10.1007/978-3-030-40971-5\_7",

language = "English",

isbn = "9783030409708",

series = "Advances in Intelligent Systems and Computing",

publisher = "Springer",

pages = "67--77",

editor = "Roman Szewczyk and Cezary Zielinski and Malgorzata Kaliczynska",

booktitle = "Automation 2020",

address = "Germany",

}

Frątczak, M , Nowak, P , Kłopot, T , Czeczot, J, Bysko, S & Bysko, S 2020, Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution Processes. w R Szewczyk, C Zielinski & M Kaliczynska (red), Automation 2020: Towards Industry of the Future - Proceedings of Automation. Advances in Intelligent Systems and Computing, tom 1140 AISC, Springer, str. 67-77, International Conference on Automation, AUTOMATION 2020, Warsaw, Polska, 18/03/20. https://doi.org/10.1007/978-3-030-40971-5_7

Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution Processes. / Frątczak, Michał ; Nowak, Paweł ; Kłopot, Tomasz i in.
Automation 2020: Towards Industry of the Future - Proceedings of Automation. red. / Roman Szewczyk; Cezary Zielinski; Malgorzata Kaliczynska. Springer, 2020. str. 67-77 (Advances in Intelligent Systems and Computing; Tom 1140 AISC).

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

TY - GEN

T1 - Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution Processes

AU - Frątczak, Michał

AU - Nowak, Paweł

AU - Kłopot, Tomasz

AU - Czeczot, Jacek

AU - Bysko, Szymon

AU - Bysko, Sara

PY - 2020

Y1 - 2020

N2 - This paper deals with the validation of the concept of the component-based simulation tool and its application for virtual commissioning of the industrial control systems. It is shown how to decompose the heat exchange and distribution system into the general-purpose components and then how to use these components for designing the component-based simulator of the process, which is suitable to use in virtual commissioning environment. Simulator is based on SIMULINK and WinMOD. General hardware configuration and logical layers of the experimental setup, which was used during the experiments, are shown and described in details. Then, this simulator is tested for its simulation accuracy and the hardware experimental setup is tested for its applicability for virtual commissioning of the control systems for continuous dynamical processes of medium and high complexity. Communications lags between examined control system and simulator are analyzed due to checking whether the experiment results obtained depend of simulator’s time scaling factor.

AB - This paper deals with the validation of the concept of the component-based simulation tool and its application for virtual commissioning of the industrial control systems. It is shown how to decompose the heat exchange and distribution system into the general-purpose components and then how to use these components for designing the component-based simulator of the process, which is suitable to use in virtual commissioning environment. Simulator is based on SIMULINK and WinMOD. General hardware configuration and logical layers of the experimental setup, which was used during the experiments, are shown and described in details. Then, this simulator is tested for its simulation accuracy and the hardware experimental setup is tested for its applicability for virtual commissioning of the control systems for continuous dynamical processes of medium and high complexity. Communications lags between examined control system and simulator are analyzed due to checking whether the experiment results obtained depend of simulator’s time scaling factor.

KW - Heat exchange and distribution systems

KW - Library components

KW - Modeling and simulation

KW - Virtual commissioning

UR - https://www.scopus.com/pages/publications/85082996043

U2 - 10.1007/978-3-030-40971-5_7

DO - 10.1007/978-3-030-40971-5_7

M3 - Conference contribution

AN - SCOPUS:85082996043

SN - 9783030409708

T3 - Advances in Intelligent Systems and Computing

SP - 67

EP - 77

BT - Automation 2020

A2 - Szewczyk, Roman

A2 - Zielinski, Cezary

A2 - Kaliczynska, Malgorzata

PB - Springer

T2 - International Conference on Automation, AUTOMATION 2020

Y2 - 18 March 2020 through 20 March 2020

ER -

Frątczak M , Nowak P , Kłopot T , Czeczot J, Bysko S, Bysko S. Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution Processes. W Szewczyk R, Zielinski C, Kaliczynska M, redaktorzy, Automation 2020: Towards Industry of the Future - Proceedings of Automation. Springer. 2020. str. 67-77. (Advances in Intelligent Systems and Computing). doi: 10.1007/978-3-030-40971-5_7

Component-Based Simulation Tool for Virtual Commissioning of Control Systems for Heat Exchange and Distribution Processes

Abstrakt

Seria publikacji

Konferencja

Cele SDG ONZ

Obszary tematyczne ASJC Scopus

Uzyskaj dostęp do dokumentu

Inne pliki i linki

Fingerprint

Cytowanie