Biofunctionalization of Ti-13Nb-13Zr alloy surface by plasma electrolytic oxidation. Part II

Alicja Kazek-Kesik; Małgorzata Krok-Borkowicz; Agata Jakóbik-Kolon; Elzbieta Pamuła; Wojciech Simka

doi:10.1016/j.surfcoat.2015.06.035

Biofunctionalization of Ti-13Nb-13Zr alloy surface by plasma electrolytic oxidation. Part II

Alicja Kazek-Kesik
, Małgorzata Krok-Borkowicz
, Agata Jakóbik-Kolon
, Elzbieta Pamuła
, Wojciech Simka

Katedra Chemii Nieorganicznej, Analitycznej i Elektrochemii (RCH/RCH1)

AGH University of Krakow

Wyniki badań: Wkład do czasopisma › Artykuł › recenzja

23 Cytowania z bazy Scopus

Abstrakt

The surface of Ti-13Nb-13Zr alloy was modified in 0.1M calcium hypophosphite (Ca(H₂PO₂)₂) solutions via the addition of tricalcium phosphate, wollastonite or silica powders using a plasma electrolytic oxidation process. Depending on the anodizing bath chemical composition and applied voltage, various oxide layers were formed on the substrate. The water contact angle of the oxide layer was measured. The biological investigations using osteoblast-like cells MG-63 showed that the suspensions utilized during anodization strongly influenced the oxide layer bioactivity. Only the traces of the alloy elements were involved in Ringer solution after 5months of immersion.

Język oryginału	angielski
Strony (od–do)	23-30
Liczba stron	8
Czasopismo	Surface and Coatings Technology
Tom	276
Identyfikatory DOI	https://doi.org/10.1016/j.surfcoat.2015.06.035
Status publikacji	Opublikowano - 25 sie 2015

Obszary tematyczne ASJC Scopus

Chemia ogólna
Fizyka materii skondensowanej
Powierzchnie i interfejsy
Powierzchnie, powłoki i filmy
Chemia materiałowa

Uzyskaj dostęp do dokumentu

10.1016/j.surfcoat.2015.06.035

Inne pliki i linki

Link do publikacji w Scopus

Cytowanie

@article{985a384d3cbc468b9ee06db903e734fe,

title = "Biofunctionalization of Ti-13Nb-13Zr alloy surface by plasma electrolytic oxidation. Part II",

abstract = "The surface of Ti-13Nb-13Zr alloy was modified in 0.1M calcium hypophosphite (Ca(H2PO2)2) solutions via the addition of tricalcium phosphate, wollastonite or silica powders using a plasma electrolytic oxidation process. Depending on the anodizing bath chemical composition and applied voltage, various oxide layers were formed on the substrate. The water contact angle of the oxide layer was measured. The biological investigations using osteoblast-like cells MG-63 showed that the suspensions utilized during anodization strongly influenced the oxide layer bioactivity. Only the traces of the alloy elements were involved in Ringer solution after 5months of immersion.",

keywords = "Bioactivity, Osteoblast-like cell MG-63, Plasma electrolytic oxidation, Titanium alloy",

author = "Alicja Kazek-Kesik and Ma{\l}gorzata Krok-Borkowicz and Agata Jak{\'o}bik-Kolon and Elzbieta Pamu{\l}a and Wojciech Simka",

note = "Publisher Copyright: {\textcopyright} 2015 Elsevier B.V..",

year = "2015",

month = aug,

day = "25",

doi = "10.1016/j.surfcoat.2015.06.035",

language = "English",

volume = "276",

pages = "23--30",

journal = "Surface and Coatings Technology",

issn = "0257-8972",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Biofunctionalization of Ti-13Nb-13Zr alloy surface by plasma electrolytic oxidation. Part II

AU - Kazek-Kesik, Alicja

AU - Krok-Borkowicz, Małgorzata

AU - Jakóbik-Kolon, Agata

AU - Pamuła, Elzbieta

AU - Simka, Wojciech

PY - 2015/8/25

Y1 - 2015/8/25

N2 - The surface of Ti-13Nb-13Zr alloy was modified in 0.1M calcium hypophosphite (Ca(H2PO2)2) solutions via the addition of tricalcium phosphate, wollastonite or silica powders using a plasma electrolytic oxidation process. Depending on the anodizing bath chemical composition and applied voltage, various oxide layers were formed on the substrate. The water contact angle of the oxide layer was measured. The biological investigations using osteoblast-like cells MG-63 showed that the suspensions utilized during anodization strongly influenced the oxide layer bioactivity. Only the traces of the alloy elements were involved in Ringer solution after 5months of immersion.

AB - The surface of Ti-13Nb-13Zr alloy was modified in 0.1M calcium hypophosphite (Ca(H2PO2)2) solutions via the addition of tricalcium phosphate, wollastonite or silica powders using a plasma electrolytic oxidation process. Depending on the anodizing bath chemical composition and applied voltage, various oxide layers were formed on the substrate. The water contact angle of the oxide layer was measured. The biological investigations using osteoblast-like cells MG-63 showed that the suspensions utilized during anodization strongly influenced the oxide layer bioactivity. Only the traces of the alloy elements were involved in Ringer solution after 5months of immersion.

KW - Bioactivity

KW - Osteoblast-like cell MG-63

KW - Plasma electrolytic oxidation

KW - Titanium alloy

UR - https://www.scopus.com/pages/publications/84939192373

U2 - 10.1016/j.surfcoat.2015.06.035

DO - 10.1016/j.surfcoat.2015.06.035

M3 - Article

AN - SCOPUS:84939192373

SN - 0257-8972

VL - 276

SP - 23

EP - 30

JO - Surface and Coatings Technology

JF - Surface and Coatings Technology

ER -

Biofunctionalization of Ti-13Nb-13Zr alloy surface by plasma electrolytic oxidation. Part II

Abstrakt

Obszary tematyczne ASJC Scopus

Uzyskaj dostęp do dokumentu

Inne pliki i linki

Fingerprint

Cytowanie