Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures

Wioleta Rakowska; Mariusz Galiński; Aleksander Gwiazda; Suthep Butdee; Anthony M. Xavior

doi:10.1007/978-3-031-44282-7_55

Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures

Wioleta Rakowska
, Mariusz Galiński
, Aleksander Gwiazda
, Suthep Butdee
, Anthony M. Xavior

Lukasiewicz Research Network-Upper Silesian Institute of Technology
PONAR Wadowice - Zakład w Łaziskach Górnych
Rajamangala University of Technology Krungthep
Vellore Institute of Technology

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

Abstrakt

When designing technical systems, one of the most important tasks is to determine their operating parameters in target conditions. Most often, these are model activities aimed at conducting tests on model systems or prototypes of the analyzed systems. Conducting such research also involves their proper analysis. This publication presents a solution proposed for such situations. The publication presents an example of testing a hydraulic system at low temperatures, as well as an analysis of test results and a determination of the scope of objectives based on the weighted Ishikawa diagram. The system was tested at −50 ℃ and problems were identified at this temperature. Operational problems at such a low temperature were then analyzed using a 10M fishbone diagram. The obtained results allow both to define further research procedures and to set further research directions. They also allow for the assessment of interactions between identified problems.

Język oryginału	angielski
Tytuł publikacji goszczącej	Intelligent Systems in Production Engineering and Maintenance 3
Redaktorzy	Anna Burduk, Andre D.L. Batako, José Machado, Ryszrad Wyczółkowski, Ewa Dostatni, Izabela Rojek
Wydawca	Springer Science and Business Media Deutschland GmbH
Strony	726-736
Liczba stron	11
ISBN (drukowany)	9783031442810
Identyfikatory DOI	https://doi.org/10.1007/978-3-031-44282-7_55
Status publikacji	Opublikowano - 2024
Wydarzenie	4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023 - Wrocław, Polska Czas trwania: 13 wrz 2023 → 15 wrz 2023

Seria publikacji

Nazwa	Lecture Notes in Mechanical Engineering
ISSN (drukowany)	2195-4356
ISSN (elektroniczny)	2195-4364

Konferencja

Konferencja	4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023
Kraj/Terytorium	Polska
Miejscowość	Wrocław
Okres	13/09/23 → 15/09/23

Obszary tematyczne ASJC Scopus

Inżynieria motoryzacyjna
Inżynieria lotnicza i kosmiczna
Inżynieria mechaniczna
Procesy przepływu i przenoszenia płynów

Uzyskaj dostęp do dokumentu

10.1007/978-3-031-44282-7_55

Inne pliki i linki

Link do publikacji w Scopus

Cytowanie

Rakowska, W., Galiński, M., Gwiazda, A., Butdee, S., & Xavior, A. M. (2024). Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. W A. Burduk, A. D. L. Batako, J. Machado, R. Wyczółkowski, E. Dostatni, & I. Rojek (Red.), Intelligent Systems in Production Engineering and Maintenance 3 (str. 726-736). (Lecture Notes in Mechanical Engineering). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-031-44282-7_55

Rakowska, Wioleta ; Galiński, Mariusz ; Gwiazda, Aleksander i in. / Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. Intelligent Systems in Production Engineering and Maintenance 3. redaktor / Anna Burduk ; Andre D.L. Batako ; José Machado ; Ryszrad Wyczółkowski ; Ewa Dostatni ; Izabela Rojek. Springer Science and Business Media Deutschland GmbH, 2024. str. 726-736 (Lecture Notes in Mechanical Engineering).

@inproceedings{a33e5a1c91474e4d9ee9478690928f49,

title = "Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures",

abstract = "When designing technical systems, one of the most important tasks is to determine their operating parameters in target conditions. Most often, these are model activities aimed at conducting tests on model systems or prototypes of the analyzed systems. Conducting such research also involves their proper analysis. This publication presents a solution proposed for such situations. The publication presents an example of testing a hydraulic system at low temperatures, as well as an analysis of test results and a determination of the scope of objectives based on the weighted Ishikawa diagram. The system was tested at −50 ℃ and problems were identified at this temperature. Operational problems at such a low temperature were then analyzed using a 10M fishbone diagram. The obtained results allow both to define further research procedures and to set further research directions. They also allow for the assessment of interactions between identified problems.",

keywords = "CAD design, Hydraulic systems, Problems analysis",

author = "Wioleta Rakowska and Mariusz Gali{\'n}ski and Aleksander Gwiazda and Suthep Butdee and Xavior, \{Anthony M.\}",

note = "Publisher Copyright: {\textcopyright} 2024, The Author(s), under exclusive license to Springer Nature Switzerland AG.; 4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023 ; Conference date: 13-09-2023 Through 15-09-2023",

year = "2024",

doi = "10.1007/978-3-031-44282-7\_55",

language = "English",

isbn = "9783031442810",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "726--736",

editor = "Anna Burduk and Batako, \{Andre D.L.\} and Jos{\'e} Machado and Ryszrad Wycz{\'o}{\l}kowski and Ewa Dostatni and Izabela Rojek",

booktitle = "Intelligent Systems in Production Engineering and Maintenance 3",

address = "Germany",

}

Rakowska, W , Galiński, M , Gwiazda, A, Butdee, S & Xavior, AM 2024, Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. w A Burduk, ADL Batako, J Machado, R Wyczółkowski, E Dostatni & I Rojek (red), Intelligent Systems in Production Engineering and Maintenance 3. Lecture Notes in Mechanical Engineering, Springer Science and Business Media Deutschland GmbH, str. 726-736, 4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023, Wrocław, Polska, 13/09/23. https://doi.org/10.1007/978-3-031-44282-7_55

Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. / Rakowska, Wioleta ; Galiński, Mariusz ; Gwiazda, Aleksander i in.
Intelligent Systems in Production Engineering and Maintenance 3. red. / Anna Burduk; Andre D.L. Batako; José Machado; Ryszrad Wyczółkowski; Ewa Dostatni; Izabela Rojek. Springer Science and Business Media Deutschland GmbH, 2024. str. 726-736 (Lecture Notes in Mechanical Engineering).

Wyniki badań: Rozdział w książce/raport/materiał konferencyjny › Wkład w konferencję › recenzja

TY - GEN

T1 - Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures

AU - Rakowska, Wioleta

AU - Galiński, Mariusz

AU - Gwiazda, Aleksander

AU - Butdee, Suthep

AU - Xavior, Anthony M.

PY - 2024

Y1 - 2024

N2 - When designing technical systems, one of the most important tasks is to determine their operating parameters in target conditions. Most often, these are model activities aimed at conducting tests on model systems or prototypes of the analyzed systems. Conducting such research also involves their proper analysis. This publication presents a solution proposed for such situations. The publication presents an example of testing a hydraulic system at low temperatures, as well as an analysis of test results and a determination of the scope of objectives based on the weighted Ishikawa diagram. The system was tested at −50 ℃ and problems were identified at this temperature. Operational problems at such a low temperature were then analyzed using a 10M fishbone diagram. The obtained results allow both to define further research procedures and to set further research directions. They also allow for the assessment of interactions between identified problems.

AB - When designing technical systems, one of the most important tasks is to determine their operating parameters in target conditions. Most often, these are model activities aimed at conducting tests on model systems or prototypes of the analyzed systems. Conducting such research also involves their proper analysis. This publication presents a solution proposed for such situations. The publication presents an example of testing a hydraulic system at low temperatures, as well as an analysis of test results and a determination of the scope of objectives based on the weighted Ishikawa diagram. The system was tested at −50 ℃ and problems were identified at this temperature. Operational problems at such a low temperature were then analyzed using a 10M fishbone diagram. The obtained results allow both to define further research procedures and to set further research directions. They also allow for the assessment of interactions between identified problems.

KW - CAD design

KW - Hydraulic systems

KW - Problems analysis

UR - https://www.scopus.com/pages/publications/85174447486

U2 - 10.1007/978-3-031-44282-7_55

DO - 10.1007/978-3-031-44282-7_55

M3 - Conference contribution

AN - SCOPUS:85174447486

SN - 9783031442810

T3 - Lecture Notes in Mechanical Engineering

SP - 726

EP - 736

BT - Intelligent Systems in Production Engineering and Maintenance 3

A2 - Burduk, Anna

A2 - Batako, Andre D.L.

A2 - Machado, José

A2 - Wyczółkowski, Ryszrad

A2 - Dostatni, Ewa

A2 - Rojek, Izabela

PB - Springer Science and Business Media Deutschland GmbH

T2 - 4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023

Y2 - 13 September 2023 through 15 September 2023

ER -

Rakowska W , Galiński M , Gwiazda A, Butdee S, Xavior AM. Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. W Burduk A, Batako ADL, Machado J, Wyczółkowski R, Dostatni E, Rojek I, redaktorzy, Intelligent Systems in Production Engineering and Maintenance 3. Springer Science and Business Media Deutschland GmbH. 2024. str. 726-736. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-3-031-44282-7_55

Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures

Abstrakt

Seria publikacji

Konferencja

Obszary tematyczne ASJC Scopus

Uzyskaj dostęp do dokumentu

Inne pliki i linki

Fingerprint

Cytowanie