Using the embedded Ethernet communication capability of PLC controller for tailor-made Manufacturing Execution System

Pawel Kielan; Damian Krawczyk

doi:10.1109/REM.2015.7380378

Using the embedded Ethernet communication capability of PLC controller for tailor-made Manufacturing Execution System

Department of Mechatronics (RE/RE6)

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

There is a tailor-made Manufacturing Execution System presented in the paper. The system has been developed and implemented practically by authors. The general idea behind it is explained firstly. A generic structure of Factory Automation system was introduced. Siemens Simatic S7-300 PLC controllers were used to implement the idea. The MES software was written in C# software. The approach for PLC configuration and programming using Step 7 software was briefly presented. The communication between PC MES software and PLCs is based on industrial Ethernet. The main functionalities of the MES system were pointed.

Original language	English
Title of host publication	16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings
Editors	Albrecht Weinert, Rolf Biesenbach
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	92-110
Number of pages	19
ISBN (Electronic)	9783945728017
DOIs	https://doi.org/10.1109/REM.2015.7380378
Publication status	Published - 12 Jan 2016
Event	16th IEEE International Conference on Research and Education in Mechatronics, REM 2015 - Bochum, Germany Duration: 18 Nov 2015 → 20 Nov 2015

Publication series

Name	16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings

Conference

Conference	16th IEEE International Conference on Research and Education in Mechatronics, REM 2015
Country/Territory	Germany
City	Bochum
Period	18/11/15 → 20/11/15

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

C# programming
Manufacturing execution system
PLC programming
Programmable logic controller

ASJC Scopus subject areas

Artificial Intelligence
Electrical and Electronic Engineering
Mechanical Engineering
Education

Access to Document

10.1109/REM.2015.7380378

Cite this

Kielan, P., & Krawczyk, D. (2016). Using the embedded Ethernet communication capability of PLC controller for tailor-made Manufacturing Execution System. In A. Weinert, & R. Biesenbach (Eds.), 16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings (pp. 92-110). Article 7380378 (16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/REM.2015.7380378

Kielan, Pawel ; Krawczyk, Damian. / Using the embedded Ethernet communication capability of PLC controller for tailor-made Manufacturing Execution System. 16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings. editor / Albrecht Weinert ; Rolf Biesenbach. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 92-110 (16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings).

@inproceedings{24fd2b9ea6e04d0c9d59157613e77869,

title = "Using the embedded Ethernet communication capability of PLC controller for tailor-made Manufacturing Execution System",

abstract = "There is a tailor-made Manufacturing Execution System presented in the paper. The system has been developed and implemented practically by authors. The general idea behind it is explained firstly. A generic structure of Factory Automation system was introduced. Siemens Simatic S7-300 PLC controllers were used to implement the idea. The MES software was written in C\# software. The approach for PLC configuration and programming using Step 7 software was briefly presented. The communication between PC MES software and PLCs is based on industrial Ethernet. The main functionalities of the MES system were pointed.",

keywords = "C\# programming, Manufacturing execution system, PLC programming, Programmable logic controller",

author = "Pawel Kielan and Damian Krawczyk",

note = "Publisher Copyright: {\textcopyright} 2015 Deutsche Gesellschaft f{\"u}r Mechatronik.; 16th IEEE International Conference on Research and Education in Mechatronics, REM 2015 ; Conference date: 18-11-2015 Through 20-11-2015",

year = "2016",

month = jan,

day = "12",

doi = "10.1109/REM.2015.7380378",

language = "English",

series = "16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "92--110",

editor = "Albrecht Weinert and Rolf Biesenbach",

booktitle = "16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings",

address = "United States",

}

Kielan, P & Krawczyk, D 2016, Using the embedded Ethernet communication capability of PLC controller for tailor-made Manufacturing Execution System. in A Weinert & R Biesenbach (eds), 16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings., 7380378, 16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings, Institute of Electrical and Electronics Engineers Inc., pp. 92-110, 16th IEEE International Conference on Research and Education in Mechatronics, REM 2015, Bochum, Germany, 18/11/15. https://doi.org/10.1109/REM.2015.7380378

Using the embedded Ethernet communication capability of PLC controller for tailor-made Manufacturing Execution System. / Kielan, Pawel ; Krawczyk, Damian.
16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings. ed. / Albrecht Weinert; Rolf Biesenbach. Institute of Electrical and Electronics Engineers Inc., 2016. p. 92-110 7380378 (16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Using the embedded Ethernet communication capability of PLC controller for tailor-made Manufacturing Execution System

AU - Kielan, Pawel

AU - Krawczyk, Damian

PY - 2016/1/12

Y1 - 2016/1/12

N2 - There is a tailor-made Manufacturing Execution System presented in the paper. The system has been developed and implemented practically by authors. The general idea behind it is explained firstly. A generic structure of Factory Automation system was introduced. Siemens Simatic S7-300 PLC controllers were used to implement the idea. The MES software was written in C# software. The approach for PLC configuration and programming using Step 7 software was briefly presented. The communication between PC MES software and PLCs is based on industrial Ethernet. The main functionalities of the MES system were pointed.

AB - There is a tailor-made Manufacturing Execution System presented in the paper. The system has been developed and implemented practically by authors. The general idea behind it is explained firstly. A generic structure of Factory Automation system was introduced. Siemens Simatic S7-300 PLC controllers were used to implement the idea. The MES software was written in C# software. The approach for PLC configuration and programming using Step 7 software was briefly presented. The communication between PC MES software and PLCs is based on industrial Ethernet. The main functionalities of the MES system were pointed.

KW - C# programming

KW - Manufacturing execution system

KW - PLC programming

KW - Programmable logic controller

UR - https://www.scopus.com/pages/publications/84966539623

U2 - 10.1109/REM.2015.7380378

DO - 10.1109/REM.2015.7380378

M3 - Conference contribution

AN - SCOPUS:84966539623

T3 - 16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings

SP - 92

EP - 110

BT - 16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings

A2 - Weinert, Albrecht

A2 - Biesenbach, Rolf

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 16th IEEE International Conference on Research and Education in Mechatronics, REM 2015

Y2 - 18 November 2015 through 20 November 2015

ER -

Kielan P , Krawczyk D. Using the embedded Ethernet communication capability of PLC controller for tailor-made Manufacturing Execution System. In Weinert A, Biesenbach R, editors, 16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2016. p. 92-110. 7380378. (16th International Conference on Research and Education in Mechatronics, REM 2015 - Proceedings). doi: 10.1109/REM.2015.7380378

Using the embedded Ethernet communication capability of PLC controller for tailor-made Manufacturing Execution System

Abstract

Publication series

Conference

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this