Thermal expansion of alloys from the Al-Fe system

A. Śmiglewicz; M. Jabłońska

doi:10.4028/www.scientific.net/DDF.326-328.587

Thermal expansion of alloys from the Al-Fe system

A. Śmiglewicz
, M. Jabłońska

Department of Material Technologies (RM/RM3)

Silesian University of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Citations (Scopus)

Abstract

In this work, the results of a dilatometric study of alloys on the base of the Al-Fe system were presented. Thermal expansion investigations of the alloys of the Al-Fe system with concentration of Al equal to - 38, 48, 58 at.% were also presented. The alloys were obtained by classical casting technique. The thermal expansion studies of the alloys were carried out by dilatometric analysis method using a Setsys thermal analyzer made by Setaram. A linear thermal expansion coefficient α was calculated using standard methods. A temperature dependence of the α coefficient was noted. The results are an important supplement of knowledge on the alloys of the Al-Fe system.

Original language	English
Title of host publication	Diffusion in Solids and Liquids VII
Subtitle of host publication	Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials
Publisher	Trans Tech Publications Ltd.
Pages	587-592
Number of pages	6
Volume	326-328
ISBN (Print)	9783037854006
DOIs	https://doi.org/10.4028/www.scientific.net/DDF.326-328.587
Publication status	Published - 2012
Event	7th International Conference on Diffusion in Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials, DSL 2011 - Algarve, Portugal Duration: 26 Jun 2011 → 30 Jun 2011

Conference

Conference	7th International Conference on Diffusion in Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials, DSL 2011
Country/Territory	Portugal
City	Algarve
Period	26/06/11 → 30/06/11

Keywords

Alloys from Al-Fe system
Dilatometric analysis
Thermal expansion

ASJC Scopus subject areas

Radiation
General Materials Science
Condensed Matter Physics

Access to Document

10.4028/www.scientific.net/DDF.326-328.587

Cite this

Śmiglewicz, A., & Jabłońska, M. (2012). Thermal expansion of alloys from the Al-Fe system. In Diffusion in Solids and Liquids VII: Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials (Vol. 326-328, pp. 587-592). Trans Tech Publications Ltd.. https://doi.org/10.4028/www.scientific.net/DDF.326-328.587

@inproceedings{29e10a08b31c4e98a50c66f5605ec9e5,

title = "Thermal expansion of alloys from the Al-Fe system",

abstract = "In this work, the results of a dilatometric study of alloys on the base of the Al-Fe system were presented. Thermal expansion investigations of the alloys of the Al-Fe system with concentration of Al equal to - 38, 48, 58 at.\% were also presented. The alloys were obtained by classical casting technique. The thermal expansion studies of the alloys were carried out by dilatometric analysis method using a Setsys thermal analyzer made by Setaram. A linear thermal expansion coefficient α was calculated using standard methods. A temperature dependence of the α coefficient was noted. The results are an important supplement of knowledge on the alloys of the Al-Fe system.",

keywords = "Alloys from Al-Fe system, Dilatometric analysis, Thermal expansion",

author = "A. {\'S}miglewicz and M. Jab{\l}o{\'n}ska",

year = "2012",

doi = "10.4028/www.scientific.net/DDF.326-328.587",

language = "English",

isbn = "9783037854006",

volume = "326-328",

pages = "587--592",

booktitle = "Diffusion in Solids and Liquids VII",

publisher = "Trans Tech Publications Ltd.",

address = "Switzerland",

note = "7th International Conference on Diffusion in Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials, DSL 2011 ; Conference date: 26-06-2011 Through 30-06-2011",

}

Śmiglewicz, A & Jabłońska, M 2012, Thermal expansion of alloys from the Al-Fe system. in Diffusion in Solids and Liquids VII: Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials. vol. 326-328, Trans Tech Publications Ltd., pp. 587-592, 7th International Conference on Diffusion in Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials, DSL 2011, Algarve, Portugal, 26/06/11. https://doi.org/10.4028/www.scientific.net/DDF.326-328.587

Thermal expansion of alloys from the Al-Fe system. / Śmiglewicz, A.; Jabłońska, M.
Diffusion in Solids and Liquids VII: Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials. Vol. 326-328 Trans Tech Publications Ltd., 2012. p. 587-592.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Thermal expansion of alloys from the Al-Fe system

AU - Śmiglewicz, A.

AU - Jabłońska, M.

PY - 2012

Y1 - 2012

N2 - In this work, the results of a dilatometric study of alloys on the base of the Al-Fe system were presented. Thermal expansion investigations of the alloys of the Al-Fe system with concentration of Al equal to - 38, 48, 58 at.% were also presented. The alloys were obtained by classical casting technique. The thermal expansion studies of the alloys were carried out by dilatometric analysis method using a Setsys thermal analyzer made by Setaram. A linear thermal expansion coefficient α was calculated using standard methods. A temperature dependence of the α coefficient was noted. The results are an important supplement of knowledge on the alloys of the Al-Fe system.

AB - In this work, the results of a dilatometric study of alloys on the base of the Al-Fe system were presented. Thermal expansion investigations of the alloys of the Al-Fe system with concentration of Al equal to - 38, 48, 58 at.% were also presented. The alloys were obtained by classical casting technique. The thermal expansion studies of the alloys were carried out by dilatometric analysis method using a Setsys thermal analyzer made by Setaram. A linear thermal expansion coefficient α was calculated using standard methods. A temperature dependence of the α coefficient was noted. The results are an important supplement of knowledge on the alloys of the Al-Fe system.

KW - Alloys from Al-Fe system

KW - Dilatometric analysis

KW - Thermal expansion

UR - https://www.scopus.com/pages/publications/84860815662

U2 - 10.4028/www.scientific.net/DDF.326-328.587

DO - 10.4028/www.scientific.net/DDF.326-328.587

M3 - Conference contribution

AN - SCOPUS:84860815662

SN - 9783037854006

VL - 326-328

SP - 587

EP - 592

BT - Diffusion in Solids and Liquids VII

PB - Trans Tech Publications Ltd.

T2 - 7th International Conference on Diffusion in Solids and Liquids, Mass Transfer - Heat Transfer - Microstructure and Properties - Nanodiffusion and Nanostructured Materials, DSL 2011

Y2 - 26 June 2011 through 30 June 2011

ER -

Thermal expansion of alloys from the Al-Fe system

Abstract

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this