Study of Strength and Fatigue of Stainless Steel and Titanium Plates

Anita Kajzer; Sabina Niedźwiedź; Wojciech Kajzer; Jan Marciniak; Bożena Gzik-Zroska; Kamil Joszko; Marcin Kaczmarek; Zbigniew Pilecki

doi:10.1007/978-3-030-52180-6_29

Study of Strength and Fatigue of Stainless Steel and Titanium Plates

Anita Kajzer
, Sabina Niedźwiedź
, Wojciech Kajzer
, Jan Marciniak
, Bożena Gzik-Zroska
, Kamil Joszko
, Marcin Kaczmarek
, Zbigniew Pilecki

Silesian University of Technology
Department of Pediatric Orthopedics and Traumatology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Abstract

The main purpose of the work was to select an alternative metal biomaterial for the treatment of deformities of the anterior chest wall. For this purpose, a compression test and fatigue tests were carried out on plates made of stainless steel and Grade 4 titanium with chemical composition and mechanical properties compliant with the recommendations of ISO 5832-1 and ISO 5832-2, respectively. During the fatigue tests, the conditions simulating the breathing process were taken into account. Based on the obtained results, it was found that the values of forces during both compression and fatigue tests were greater for the stainless steel plate. However, in this case, as well as in the titanium plates, no plastic deformations were observed, which would affect the change in the properties of the implants during the loading, which is dependent on the type and size of the defect.

Original language	English
Title of host publication	Innovations in Biomedical Engineering, AAB 2020
Editors	Marek Gzik, Zbigniew Paszenda, Ewa Pietka, Ewaryst Tkacz, Krzysztof Milewski, Krzysztof Milewski
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	269-277
Number of pages	9
ISBN (Print)	9783030521790
DOIs	https://doi.org/10.1007/978-3-030-52180-6_29
Publication status	Published - 2021
Event	International Scientific Conference Advances in Applied Biomechanics, AAB 2020 - Wisla, Poland Duration: 15 May 2020 → 17 May 2020

Publication series

Name	Advances in Intelligent Systems and Computing
Volume	1223
ISSN (Print)	2194-5357
ISSN (Electronic)	2194-5365

Conference

Conference	International Scientific Conference Advances in Applied Biomechanics, AAB 2020
Country/Territory	Poland
City	Wisla
Period	15/05/20 → 17/05/20

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy
SDG 9 Industry, Innovation, and Infrastructure
SDG 12 Responsible Consumption and Production

Keywords

Fatigue tests
Stainless steel
Strength tests
Titanium Grade 4

ASJC Scopus subject areas

Control and Systems Engineering
General Computer Science

Access to Document

10.1007/978-3-030-52180-6_29

Cite this

Kajzer, A., Niedźwiedź, S., Kajzer, W., Marciniak, J., Gzik-Zroska, B., Joszko, K., Kaczmarek, M., & Pilecki, Z. (2021). Study of Strength and Fatigue of Stainless Steel and Titanium Plates. In M. Gzik, Z. Paszenda, E. Pietka, E. Tkacz, K. Milewski, & K. Milewski (Eds.), Innovations in Biomedical Engineering, AAB 2020 (pp. 269-277). (Advances in Intelligent Systems and Computing; Vol. 1223). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-030-52180-6_29

Kajzer, Anita ; Niedźwiedź, Sabina ; Kajzer, Wojciech et al. / Study of Strength and Fatigue of Stainless Steel and Titanium Plates. Innovations in Biomedical Engineering, AAB 2020. editor / Marek Gzik ; Zbigniew Paszenda ; Ewa Pietka ; Ewaryst Tkacz ; Krzysztof Milewski ; Krzysztof Milewski. Springer Science and Business Media Deutschland GmbH, 2021. pp. 269-277 (Advances in Intelligent Systems and Computing).

@inproceedings{1a7c80194bdf4c88a1482a85f71857fd,

title = "Study of Strength and Fatigue of Stainless Steel and Titanium Plates",

abstract = "The main purpose of the work was to select an alternative metal biomaterial for the treatment of deformities of the anterior chest wall. For this purpose, a compression test and fatigue tests were carried out on plates made of stainless steel and Grade 4 titanium with chemical composition and mechanical properties compliant with the recommendations of ISO 5832-1 and ISO 5832-2, respectively. During the fatigue tests, the conditions simulating the breathing process were taken into account. Based on the obtained results, it was found that the values of forces during both compression and fatigue tests were greater for the stainless steel plate. However, in this case, as well as in the titanium plates, no plastic deformations were observed, which would affect the change in the properties of the implants during the loading, which is dependent on the type and size of the defect.",

keywords = "Fatigue tests, Stainless steel, Strength tests, Titanium Grade 4",

author = "Anita Kajzer and Sabina Nied{\'z}wied{\'z} and Wojciech Kajzer and Jan Marciniak and Bo{\.z}ena Gzik-Zroska and Kamil Joszko and Marcin Kaczmarek and Zbigniew Pilecki",

note = "Publisher Copyright: {\textcopyright} 2021, The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG.; International Scientific Conference Advances in Applied Biomechanics, AAB 2020 ; Conference date: 15-05-2020 Through 17-05-2020",

year = "2021",

doi = "10.1007/978-3-030-52180-6\_29",

language = "English",

isbn = "9783030521790",

series = "Advances in Intelligent Systems and Computing",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "269--277",

editor = "Marek Gzik and Zbigniew Paszenda and Ewa Pietka and Ewaryst Tkacz and Krzysztof Milewski and Krzysztof Milewski",

booktitle = "Innovations in Biomedical Engineering, AAB 2020",

address = "Germany",

}

Kajzer, A, Niedźwiedź, S, Kajzer, W, Marciniak, J, Gzik-Zroska, B , Joszko, K , Kaczmarek, M & Pilecki, Z 2021, Study of Strength and Fatigue of Stainless Steel and Titanium Plates. in M Gzik, Z Paszenda, E Pietka, E Tkacz, K Milewski & K Milewski (eds), Innovations in Biomedical Engineering, AAB 2020. Advances in Intelligent Systems and Computing, vol. 1223, Springer Science and Business Media Deutschland GmbH, pp. 269-277, International Scientific Conference Advances in Applied Biomechanics, AAB 2020, Wisla, Poland, 15/05/20. https://doi.org/10.1007/978-3-030-52180-6_29

Study of Strength and Fatigue of Stainless Steel and Titanium Plates. / Kajzer, Anita; Niedźwiedź, Sabina; Kajzer, Wojciech et al.
Innovations in Biomedical Engineering, AAB 2020. ed. / Marek Gzik; Zbigniew Paszenda; Ewa Pietka; Ewaryst Tkacz; Krzysztof Milewski; Krzysztof Milewski. Springer Science and Business Media Deutschland GmbH, 2021. p. 269-277 (Advances in Intelligent Systems and Computing; Vol. 1223).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Study of Strength and Fatigue of Stainless Steel and Titanium Plates

AU - Kajzer, Anita

AU - Niedźwiedź, Sabina

AU - Kajzer, Wojciech

AU - Marciniak, Jan

AU - Gzik-Zroska, Bożena

AU - Joszko, Kamil

AU - Kaczmarek, Marcin

AU - Pilecki, Zbigniew

PY - 2021

Y1 - 2021

N2 - The main purpose of the work was to select an alternative metal biomaterial for the treatment of deformities of the anterior chest wall. For this purpose, a compression test and fatigue tests were carried out on plates made of stainless steel and Grade 4 titanium with chemical composition and mechanical properties compliant with the recommendations of ISO 5832-1 and ISO 5832-2, respectively. During the fatigue tests, the conditions simulating the breathing process were taken into account. Based on the obtained results, it was found that the values of forces during both compression and fatigue tests were greater for the stainless steel plate. However, in this case, as well as in the titanium plates, no plastic deformations were observed, which would affect the change in the properties of the implants during the loading, which is dependent on the type and size of the defect.

AB - The main purpose of the work was to select an alternative metal biomaterial for the treatment of deformities of the anterior chest wall. For this purpose, a compression test and fatigue tests were carried out on plates made of stainless steel and Grade 4 titanium with chemical composition and mechanical properties compliant with the recommendations of ISO 5832-1 and ISO 5832-2, respectively. During the fatigue tests, the conditions simulating the breathing process were taken into account. Based on the obtained results, it was found that the values of forces during both compression and fatigue tests were greater for the stainless steel plate. However, in this case, as well as in the titanium plates, no plastic deformations were observed, which would affect the change in the properties of the implants during the loading, which is dependent on the type and size of the defect.

KW - Fatigue tests

KW - Stainless steel

KW - Strength tests

KW - Titanium Grade 4

UR - https://www.scopus.com/pages/publications/85094136931

U2 - 10.1007/978-3-030-52180-6_29

DO - 10.1007/978-3-030-52180-6_29

M3 - Conference contribution

AN - SCOPUS:85094136931

SN - 9783030521790

T3 - Advances in Intelligent Systems and Computing

SP - 269

EP - 277

BT - Innovations in Biomedical Engineering, AAB 2020

A2 - Gzik, Marek

A2 - Paszenda, Zbigniew

A2 - Pietka, Ewa

A2 - Tkacz, Ewaryst

A2 - Milewski, Krzysztof

PB - Springer Science and Business Media Deutschland GmbH

T2 - International Scientific Conference Advances in Applied Biomechanics, AAB 2020

Y2 - 15 May 2020 through 17 May 2020

ER -

Kajzer A, Niedźwiedź S, Kajzer W, Marciniak J, Gzik-Zroska B , Joszko K et al. Study of Strength and Fatigue of Stainless Steel and Titanium Plates. In Gzik M, Paszenda Z, Pietka E, Tkacz E, Milewski K, Milewski K, editors, Innovations in Biomedical Engineering, AAB 2020. Springer Science and Business Media Deutschland GmbH. 2021. p. 269-277. (Advances in Intelligent Systems and Computing). doi: 10.1007/978-3-030-52180-6_29

Study of Strength and Fatigue of Stainless Steel and Titanium Plates

Abstract

Publication series

Conference

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this