Studies on a Novel Jet Mixer in the Extraction Process

This paper presents the original results of research on an inline jet mixer being an alternative to other, conventional mixing apparatuses used for extraction processes. In particular, researched novel geometry of a jet mixer was subjected to testing of either hydraulic performance or a liquid–liquid extraction process. Inline jet mixers are well suited for mixing gases and liquids and can be used in such processes as extraction, heat exchange, and reaction. In such an apparatus, mixing of liquids takes place by high-velocity injection of one stream into another through a series of small holes placed peripherally to a concentrically mounted inner tube. The literature lacks the data to allow for the design of these types of mixers. Extraction experiments were performed for the ethyl acetate–ethanol–water system. The research results presented in this paper enable the calculation of mixing power and the selection of optimal mixer operating parameters. Equations describing the flow resistance for both streams were developed. The mixing power was calculated and compared with other types of contactors. The data on overall volumetric mass transfer coefficients obtained by this study showed that the considered extractor is competitive with other conventional contactors at almost identical or even lower energy consumption.