Skip to main navigation Skip to search Skip to main content

Possibility of using recycled cathode ray tube (CRT) glass as filler source in polymer epoxy composites: effect of glass content and modification on mechanical strength and leaching behaviour

  • Katarzyna Suchoń
  • , Józef Stabik
  • Institute for Engineering of Polymer Materials and Dyes

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Abstract

This paper investigates the possibility of using waste cathode ray tube (CRT) glass derived from discarded e-waste as an alternate filler for polymer composites. Most of proposed technologies for recycling CRT glass are energy-consuming and some of them allow for use of only a limited quantity of waste glass. The method proposed in this paper offers the use of ecological and low energy consuming technology of preparing polymer composite filled with waste CRT glass as filler. Epoxy matrix composites were prepared with different loads of finely ground (<90 µm particle size) waste CRT glass cullet. Apart from this filler was subjected to additional surface modification with organofunctional silane to enhance adhesion between polymer matrix and glass filler. Physical, mechanical, and durability properties, lead leachability, and influence of silane modification on lead immobilization was studied. The results show that it is possible the use waste CRT glass as filler for epoxy composites. Composites with good mechanical properties were obtained. Utilization of this type of epoxy composite is an effective way for immobilization of lead included in CRT glass; additional modification with aminosilane coupling agent allows for reduction of Pb leachability from 300 mg/l to 0.01 mg/l.

Translated title of the contributionMożliwość wykorzystania szkła kineskopowego (CRT) pochodzącego z recyklingu jako wypełniacza w kompozytach polimerowo-epoksydowych: wpływ zawartości i modyfikacji szkła na wytrzymałość mechaniczną i zachowanie podczas wymywania
Original languageEnglish
Pages (from-to)326-334
Number of pages9
JournalOchrona Przed Korozja
Volume67
Issue number11
DOIs
Publication statusPublished - 2024

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 12 - Responsible Consumption and Production
    SDG 12 Responsible Consumption and Production

Keywords

  • cathode ray tube (CRT)
  • filler
  • leaded glass
  • polymer composite
  • recycling

ASJC Scopus subject areas

  • General Chemical Engineering
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Possibility of using recycled cathode ray tube (CRT) glass as filler source in polymer epoxy composites: effect of glass content and modification on mechanical strength and leaching behaviour'. Together they form a unique fingerprint.

Cite this