Skip to main navigation Skip to search Skip to main content

Phase formation, microhardness and magnetic properties of FeNiCrV-TiNb, (NiCoFeCuMn)3(AlTi) and (FeNiCoCrMn)(MoCr) high entropy intermetallic compounds

  • Ahmad Ostovari Moghaddam
  • , Dmitry Mikhailov
  • , Rahele Fereidonnejad
  • , Nataliya Shaburova
  • , Denis Vinnik
  • , Daniil Uchaev
  • , Fu Quan Bai
  • , Dawid Janas
  • , Evgeny Trofimov
  • South Ural State University
  • Jilin University

Research output: Contribution to journal › Article › peer-review

20 Citations (Scopus)

Abstract

High entropy intermetallic compounds (HEICs) are the most recent poster child of high entropy materials (HEMs), which provide a new paradigm to develop novel materials with potentially unusual properties. Here, FeNiCrV-TiNb, (Ni1/5-Co1/5-Fe1/5-Cu1/5-Mn1/5)3(Al1/2-Ti1/2), and (Fe1/5Ni1/5Co1/5Cr1/5Mn1/5)(Mo1/2Cr1/2) HEICs were fabricated by melting technique. The as-cast FeNiCrV-TiNb exhibited C14 Laves structure with varying chemical composition, which probably consists of two sub-lattices with slightly different lattice parameters. (Fe0.2Ni0.2Co0.2Cr0.2Mn0.2)(Mo0.5Cr0.5) crystalized into a single σ-phase and revealed a homogenous microstructure with negligible segregation. A two-phase B2 +D03 structure with clear segregation of Cu, Fe, and Mn was obtained for (Ni0.2Co0.2Fe0.2Cu0.2Mn0.2)3(Al0.5Ti0.5) HEIC. The microhardness values were 915 Hv, 593 Hv, and 1051 Hv for FeNiCrV-TiNb, (Ni0.2Co0.2Fe0.2Cu0.2Mn0.2)3(Al0.5Ti0.5) and (Fe0.2Ni0.2Co0.2Cr0.2Mn0.2)(Mo0.5Cr0.5) HEICs, respectively. The last one is the highest value reported for an as-cast metallic HEM. (Ni0.2Co0.2Fe0.2Cu0.2Mn0.2)3(Al0.5Ti0.5) exhibited a soft magnetic behavior with a saturation magnetization of 27.7 emu/g and coercivity of ~ 311 Oe at 300 K, while FeNiCrV-TiNb and (Fe0.2Ni0.2Co0.2Cr0.2Mn0.2)(Mo0.5Cr0.5) showed an approximately linear dependency of magnetization vs. magnetic field. Finally, two modified parameters are introduced to expedite the discovery of new single-phase HEICs.

Original languageEnglish
Article number165195
JournalJournal of Alloys and Compounds
Volume912
DOIs
Publication statusPublished - 15 Aug 2022

Keywords

  • High entropy intermetallic compounds
  • Magnetic properties
  • Microhardness
  • Microstructure

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Phase formation, microhardness and magnetic properties of FeNiCrV-TiNb, (NiCoFeCuMn)3(AlTi) and (FeNiCoCrMn)(MoCr) high entropy intermetallic compounds'. Together they form a unique fingerprint.

Cite this