Optymalizacja parametrów czȩści parowej ukladu gazowo-parowego ze spalaniem tlenowym i instalacja wychwytu CO2

Janusz Kotowicz; Marcin Job

Optymalizacja parametrów czȩści parowej ukladu gazowo-parowego ze spalaniem tlenowym i instalacja wychwytu CO₂

Translated title of the contribution: Optimization of the steam part parameters in the GTCC unit with oxy-combustion and the carbon capture installation

Janusz Kotowicz
, Marcin Job

Department of Power Engineering and Turbomachinery (RIE/RIE5)

Silesian University of Technology

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

Abstract

This paper presents a gas turbine combined cycle unit with oxy-combustion. Oxy-combustion is one of the currently developed carbon capture and storage technologies (CCS). Firstly a gas turbine part of the unit is shown and the operating parameters are selected. The focus was on the impact of the compression ratio on the unit's efficiency. In the following section the steam parts in 3 units with different heat recovery steam generator (HRSG) construction were optimized. The single-pressure HRSG (1P), double-pressure HRSG with reheating (2PR), and triple-pressure HRSG with reheating (3PR). Optimization was performed by the means of genetic algorithm presented in this paper. The optimization results and achieved characteristic parameters of analyzed units are presented and compared.

Translated title of the contribution	Optimization of the steam part parameters in the GTCC unit with oxy-combustion and the carbon capture installation
Original language	Polish
Pages (from-to)	48-55
Number of pages	8
Journal	Rynek Energii
Volume	107
Issue number	4
Publication status	Published - 2013

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 13 Climate Action

ASJC Scopus subject areas

General Mathematics
General Energy

Cite this

@article{667455ac78184121a474d5659d4a40df,

title = "Optymalizacja parametr{\'o}w czȩ{\'s}ci parowej ukladu gazowo-parowego ze spalaniem tlenowym i instalacja wychwytu CO2",

abstract = "This paper presents a gas turbine combined cycle unit with oxy-combustion. Oxy-combustion is one of the currently developed carbon capture and storage technologies (CCS). Firstly a gas turbine part of the unit is shown and the operating parameters are selected. The focus was on the impact of the compression ratio on the unit's efficiency. In the following section the steam parts in 3 units with different heat recovery steam generator (HRSG) construction were optimized. The single-pressure HRSG (1P), double-pressure HRSG with reheating (2PR), and triple-pressure HRSG with reheating (3PR). Optimization was performed by the means of genetic algorithm presented in this paper. The optimization results and achieved characteristic parameters of analyzed units are presented and compared.",

keywords = "Combined cycle power plant, Genetic algorithm, Optimization, Oxy-combustion",

author = "Janusz Kotowicz and Marcin Job",

year = "2013",

language = "polski",

volume = "107",

pages = "48--55",

journal = "Rynek Energii",

issn = "1425-5960",

publisher = "Kaprint",

number = "4",

}

TY - JOUR

T1 - Optymalizacja parametrów czȩści parowej ukladu gazowo-parowego ze spalaniem tlenowym i instalacja wychwytu CO2

AU - Kotowicz, Janusz

AU - Job, Marcin

PY - 2013

Y1 - 2013

N2 - This paper presents a gas turbine combined cycle unit with oxy-combustion. Oxy-combustion is one of the currently developed carbon capture and storage technologies (CCS). Firstly a gas turbine part of the unit is shown and the operating parameters are selected. The focus was on the impact of the compression ratio on the unit's efficiency. In the following section the steam parts in 3 units with different heat recovery steam generator (HRSG) construction were optimized. The single-pressure HRSG (1P), double-pressure HRSG with reheating (2PR), and triple-pressure HRSG with reheating (3PR). Optimization was performed by the means of genetic algorithm presented in this paper. The optimization results and achieved characteristic parameters of analyzed units are presented and compared.

AB - This paper presents a gas turbine combined cycle unit with oxy-combustion. Oxy-combustion is one of the currently developed carbon capture and storage technologies (CCS). Firstly a gas turbine part of the unit is shown and the operating parameters are selected. The focus was on the impact of the compression ratio on the unit's efficiency. In the following section the steam parts in 3 units with different heat recovery steam generator (HRSG) construction were optimized. The single-pressure HRSG (1P), double-pressure HRSG with reheating (2PR), and triple-pressure HRSG with reheating (3PR). Optimization was performed by the means of genetic algorithm presented in this paper. The optimization results and achieved characteristic parameters of analyzed units are presented and compared.

KW - Combined cycle power plant

KW - Genetic algorithm

KW - Optimization

KW - Oxy-combustion

UR - https://www.scopus.com/pages/publications/84885171200

M3 - Artykuł

AN - SCOPUS:84885171200

SN - 1425-5960

VL - 107

SP - 48

EP - 55

JO - Rynek Energii

JF - Rynek Energii

IS - 4

ER -

Optymalizacja parametrów czȩści parowej ukladu gazowo-parowego ze spalaniem tlenowym i instalacja wychwytu CO₂

Abstract

UN SDGs

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this