Modeling and simulation of trigonocephaly correction with use of finite elements method

M. Gzik; W. Wolański; E. Kawlewska; K. Kawlewski; D. Larysz

Modeling and simulation of trigonocephaly correction with use of finite elements method

M. Gzik
, W. Wolański
, E. Kawlewska
, K. Kawlewski
, D. Larysz

Medical University of Silesia in Katowice

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

In this paper the trigonocephaly, that is one of the type of craniosynostosis was described. It was presented the virtual planning of the surgical treatment and the simulation of skull shape after the correction. Also the main strain, that occur during the surgery were calculated. To obtain the 3-dimensional geometry from CT scans it was used the Mimics v14 software and to obtain the results of biomechanical analysis it was used the Ansys software.

Original language	English
Title of host publication	Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing
Pages	47-50
Number of pages	4
Publication status	Published - 2012
Event	3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, VipIMAGE 2011 - Olhao, Algarve, Portugal Duration: 12 Oct 2011 → 14 Oct 2011

Publication series

Name	Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing

Conference

Conference	3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, VipIMAGE 2011
Country/Territory	Portugal
City	Olhao, Algarve
Period	12/10/11 → 14/10/11

ASJC Scopus subject areas

Computer Vision and Pattern Recognition
Biomedical Engineering

Cite this

Gzik, M., Wolański, W., Kawlewska, E., Kawlewski, K., & Larysz, D. (2012). Modeling and simulation of trigonocephaly correction with use of finite elements method. In Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing (pp. 47-50). (Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing).

Gzik, M. ; Wolański, W. ; Kawlewska, E. et al. / Modeling and simulation of trigonocephaly correction with use of finite elements method. Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing. 2012. pp. 47-50 (Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing).

@inproceedings{4307035337b74b3cb1f1385a8769eea6,

title = "Modeling and simulation of trigonocephaly correction with use of finite elements method",

abstract = "In this paper the trigonocephaly, that is one of the type of craniosynostosis was described. It was presented the virtual planning of the surgical treatment and the simulation of skull shape after the correction. Also the main strain, that occur during the surgery were calculated. To obtain the 3-dimensional geometry from CT scans it was used the Mimics v14 software and to obtain the results of biomechanical analysis it was used the Ansys software.",

author = "M. Gzik and W. Wola{\'n}ski and E. Kawlewska and K. Kawlewski and D. Larysz",

year = "2012",

language = "English",

isbn = "9780415683951",

series = "Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing",

pages = "47--50",

booktitle = "Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing",

note = "3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, VipIMAGE 2011 ; Conference date: 12-10-2011 Through 14-10-2011",

}

Gzik, M , Wolański, W , Kawlewska, E, Kawlewski, K & Larysz, D 2012, Modeling and simulation of trigonocephaly correction with use of finite elements method. in Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing. Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, pp. 47-50, 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, VipIMAGE 2011, Olhao, Algarve, Portugal, 12/10/11.

Modeling and simulation of trigonocephaly correction with use of finite elements method. / Gzik, M.; Wolański, W.; Kawlewska, E. et al.
Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing. 2012. p. 47-50 (Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Modeling and simulation of trigonocephaly correction with use of finite elements method

AU - Gzik, M.

AU - Wolański, W.

AU - Kawlewska, E.

AU - Kawlewski, K.

AU - Larysz, D.

PY - 2012

Y1 - 2012

N2 - In this paper the trigonocephaly, that is one of the type of craniosynostosis was described. It was presented the virtual planning of the surgical treatment and the simulation of skull shape after the correction. Also the main strain, that occur during the surgery were calculated. To obtain the 3-dimensional geometry from CT scans it was used the Mimics v14 software and to obtain the results of biomechanical analysis it was used the Ansys software.

AB - In this paper the trigonocephaly, that is one of the type of craniosynostosis was described. It was presented the virtual planning of the surgical treatment and the simulation of skull shape after the correction. Also the main strain, that occur during the surgery were calculated. To obtain the 3-dimensional geometry from CT scans it was used the Mimics v14 software and to obtain the results of biomechanical analysis it was used the Ansys software.

UR - https://www.scopus.com/pages/publications/84856753648

M3 - Conference contribution

AN - SCOPUS:84856753648

SN - 9780415683951

T3 - Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing

SP - 47

EP - 50

BT - Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing

T2 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing, VipIMAGE 2011

Y2 - 12 October 2011 through 14 October 2011

ER -

Gzik M , Wolański W , Kawlewska E, Kawlewski K, Larysz D. Modeling and simulation of trigonocephaly correction with use of finite elements method. In Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing. 2012. p. 47-50. (Computational Vision and Medical Image Processing, Proceedings of VipIMAGE 2011 - 3rd ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing).

Modeling and simulation of trigonocephaly correction with use of finite elements method

Abstract

Publication series

Conference

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this