Mechanical Properties of Masonry Walls Made of Calcium Silicate Materials Made in Poland. Part 1. Masonry Properties and Compressive Strength

Radosław Jasiński; Łukasz Drobiec; Adam Piekarczyk

doi:10.1016/j.proeng.2016.08.755

Mechanical Properties of Masonry Walls Made of Calcium Silicate Materials Made in Poland. Part 1. Masonry Properties and Compressive Strength

Department of Building Structures (RB/RB2)

Research output: Contribution to journal › Conference article › peer-review

8 Citations (Scopus)

Abstract

The article presents the results of the compressive strength of wall with thin joints made of 15 types of silicate masonry produced by 12 Polish manufacturers. According to the requirements of PN-EN 772-1:2001 [2] set a normalized compressive strength f_b (90 specimens) of masonry units. Investigations of the compressive strength of the wall in made with accordance the requirements of PN-EN 1052-1:2001 [1] (44 specimens) specifying both the characteristic compressive strength f_k and the value of K factor as well. Determined the basis strength characteristics of the wall under compression compared to the characteristic proposed in the Polish National Annex to PN EN 1996-1-1 and national annexes of other European countries.

Original language	English
Pages (from-to)	904-910
Number of pages	7
Journal	Procedia Engineering
Volume	161
DOIs	https://doi.org/10.1016/j.proeng.2016.08.755
Publication status	Published - 2016
Event	World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium, WMCAUS 2016 - Prague, Czech Republic Duration: 13 Jun 2016 → 17 Jun 2016

Keywords

Calcium silicate units
K factor
compressive strength

ASJC Scopus subject areas

General Engineering

Access to Document

10.1016/j.proeng.2016.08.755

Cite this

@article{0748c301b2f94798acdfb2759e855cc4,

title = "Mechanical Properties of Masonry Walls Made of Calcium Silicate Materials Made in Poland. Part 1. Masonry Properties and Compressive Strength",

abstract = "The article presents the results of the compressive strength of wall with thin joints made of 15 types of silicate masonry produced by 12 Polish manufacturers. According to the requirements of PN-EN 772-1:2001 [2] set a normalized compressive strength fb (90 specimens) of masonry units. Investigations of the compressive strength of the wall in made with accordance the requirements of PN-EN 1052-1:2001 [1] (44 specimens) specifying both the characteristic compressive strength fk and the value of K factor as well. Determined the basis strength characteristics of the wall under compression compared to the characteristic proposed in the Polish National Annex to PN EN 1996-1-1 and national annexes of other European countries.",

keywords = "Calcium silicate units, K factor, compressive strength",

author = "Rados{\l}aw Jasi{\'n}ski and {\L}ukasz Drobiec and Adam Piekarczyk",

note = "Publisher Copyright: {\textcopyright} 2016 The Authors.; World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium, WMCAUS 2016 ; Conference date: 13-06-2016 Through 17-06-2016",

year = "2016",

doi = "10.1016/j.proeng.2016.08.755",

language = "English",

volume = "161",

pages = "904--910",

journal = "Procedia Engineering",

issn = "1877-7058",

publisher = "Elsevier Ltd.",

}

TY - JOUR

T1 - Mechanical Properties of Masonry Walls Made of Calcium Silicate Materials Made in Poland. Part 1. Masonry Properties and Compressive Strength

AU - Jasiński, Radosław

AU - Drobiec, Łukasz

AU - Piekarczyk, Adam

PY - 2016

Y1 - 2016

N2 - The article presents the results of the compressive strength of wall with thin joints made of 15 types of silicate masonry produced by 12 Polish manufacturers. According to the requirements of PN-EN 772-1:2001 [2] set a normalized compressive strength fb (90 specimens) of masonry units. Investigations of the compressive strength of the wall in made with accordance the requirements of PN-EN 1052-1:2001 [1] (44 specimens) specifying both the characteristic compressive strength fk and the value of K factor as well. Determined the basis strength characteristics of the wall under compression compared to the characteristic proposed in the Polish National Annex to PN EN 1996-1-1 and national annexes of other European countries.

AB - The article presents the results of the compressive strength of wall with thin joints made of 15 types of silicate masonry produced by 12 Polish manufacturers. According to the requirements of PN-EN 772-1:2001 [2] set a normalized compressive strength fb (90 specimens) of masonry units. Investigations of the compressive strength of the wall in made with accordance the requirements of PN-EN 1052-1:2001 [1] (44 specimens) specifying both the characteristic compressive strength fk and the value of K factor as well. Determined the basis strength characteristics of the wall under compression compared to the characteristic proposed in the Polish National Annex to PN EN 1996-1-1 and national annexes of other European countries.

KW - Calcium silicate units

KW - K factor

KW - compressive strength

UR - https://www.scopus.com/pages/publications/84997701825

U2 - 10.1016/j.proeng.2016.08.755

DO - 10.1016/j.proeng.2016.08.755

M3 - Conference article

AN - SCOPUS:84997701825

SN - 1877-7058

VL - 161

SP - 904

EP - 910

JO - Procedia Engineering

JF - Procedia Engineering

T2 - World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium, WMCAUS 2016

Y2 - 13 June 2016 through 17 June 2016

ER -

Mechanical Properties of Masonry Walls Made of Calcium Silicate Materials Made in Poland. Part 1. Masonry Properties and Compressive Strength

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this