Manufacturing of light weight aggregates from the local waste materials for application in the building concrete

Tomasz Pawlik; Daniel Michalik; Malgorzata Sopicka-Lizer; Marcin Godzierz

doi:10.4028/www.scientific.net/MSF.904.174

Manufacturing of light weight aggregates from the local waste materials for application in the building concrete

Tomasz Pawlik
, Daniel Michalik
, Malgorzata Sopicka-Lizer
, Marcin Godzierz

Department of Material Technologies (RM/RM3)

Silesian University of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

The aim of those research was to find out the technique of the car windshield glass waste utilization. The research was performed in cooperation with the Polish small company, active in the waste utilization. Manufacturing of the light weight aggregates (LWAs) for application in the building concrete has been chosen as an appropriate solution. The local coal mine slates, the fine-grained coal mine wastes and fly ash from the local power station were tried for making the suitable mixture for granulation and sintering. All waste materials were characterized for their granulation, chemical composition and thermal behavior (DTA, TG/DTG, linear changes). Several mixtures with various composition were prepared, milled, homogenized and pelletized with water addition and finally sintered at 950°C. Thermally treated granules were tested for their density, porosity and mechanical properties. Some specimens were observed in scanning microscope. It has been shown that by variation of the composition of the waste materials it is possible to produce aggregates with a large variety of mechanical properties and porosities.

Original language	English
Title of host publication	Metallurgy Technology and Materials V - 5th ICMTM
Editors	Zawati Harun
Publisher	Trans Tech Publications Ltd.
Pages	174-178
Number of pages	5
ISBN (Print)	9783035711929
DOIs	https://doi.org/10.4028/www.scientific.net/MSF.904.174
Publication status	Published - 2017
Event	5th International Conference on Metallurgy Technology and Materials, ICMTM 2017 - Xiamen, China Duration: 15 Apr 2017 → 16 Apr 2017

Publication series

Name	Materials Science Forum
Volume	904 MSF
ISSN (Print)	0255-5476
ISSN (Electronic)	1662-9752

Conference

Conference	5th International Conference on Metallurgy Technology and Materials, ICMTM 2017
Country/Territory	China
City	Xiamen
Period	15/04/17 → 16/04/17

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

Porous granules
Utilization
Waste materials
Windshield glass

ASJC Scopus subject areas

General Materials Science
Condensed Matter Physics
Mechanics of Materials
Mechanical Engineering

Access to Document

10.4028/www.scientific.net/MSF.904.174

Cite this

Pawlik, T., Michalik, D., Sopicka-Lizer, M., & Godzierz, M. (2017). Manufacturing of light weight aggregates from the local waste materials for application in the building concrete. In Z. Harun (Ed.), Metallurgy Technology and Materials V - 5th ICMTM (pp. 174-178). (Materials Science Forum; Vol. 904 MSF). Trans Tech Publications Ltd.. https://doi.org/10.4028/www.scientific.net/MSF.904.174

@inproceedings{e458d4bba6384d60901d429532c89aa3,

title = "Manufacturing of light weight aggregates from the local waste materials for application in the building concrete",

abstract = "The aim of those research was to find out the technique of the car windshield glass waste utilization. The research was performed in cooperation with the Polish small company, active in the waste utilization. Manufacturing of the light weight aggregates (LWAs) for application in the building concrete has been chosen as an appropriate solution. The local coal mine slates, the fine-grained coal mine wastes and fly ash from the local power station were tried for making the suitable mixture for granulation and sintering. All waste materials were characterized for their granulation, chemical composition and thermal behavior (DTA, TG/DTG, linear changes). Several mixtures with various composition were prepared, milled, homogenized and pelletized with water addition and finally sintered at 950°C. Thermally treated granules were tested for their density, porosity and mechanical properties. Some specimens were observed in scanning microscope. It has been shown that by variation of the composition of the waste materials it is possible to produce aggregates with a large variety of mechanical properties and porosities.",

keywords = "Porous granules, Utilization, Waste materials, Windshield glass",

author = "Tomasz Pawlik and Daniel Michalik and Malgorzata Sopicka-Lizer and Marcin Godzierz",

note = "Publisher Copyright: {\textcopyright} 2017 Trans Tech Publications, Switzerland.; 5th International Conference on Metallurgy Technology and Materials, ICMTM 2017 ; Conference date: 15-04-2017 Through 16-04-2017",

year = "2017",

doi = "10.4028/www.scientific.net/MSF.904.174",

language = "English",

isbn = "9783035711929",

series = "Materials Science Forum",

publisher = "Trans Tech Publications Ltd.",

pages = "174--178",

editor = "Zawati Harun",

booktitle = "Metallurgy Technology and Materials V - 5th ICMTM",

address = "Switzerland",

}

Pawlik, T, Michalik, D, Sopicka-Lizer, M & Godzierz, M 2017, Manufacturing of light weight aggregates from the local waste materials for application in the building concrete. in Z Harun (ed.), Metallurgy Technology and Materials V - 5th ICMTM. Materials Science Forum, vol. 904 MSF, Trans Tech Publications Ltd., pp. 174-178, 5th International Conference on Metallurgy Technology and Materials, ICMTM 2017, Xiamen, China, 15/04/17. https://doi.org/10.4028/www.scientific.net/MSF.904.174

Manufacturing of light weight aggregates from the local waste materials for application in the building concrete. / Pawlik, Tomasz; Michalik, Daniel; Sopicka-Lizer, Malgorzata et al.
Metallurgy Technology and Materials V - 5th ICMTM. ed. / Zawati Harun. Trans Tech Publications Ltd., 2017. p. 174-178 (Materials Science Forum; Vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Manufacturing of light weight aggregates from the local waste materials for application in the building concrete

AU - Pawlik, Tomasz

AU - Michalik, Daniel

AU - Sopicka-Lizer, Malgorzata

AU - Godzierz, Marcin

PY - 2017

Y1 - 2017

N2 - The aim of those research was to find out the technique of the car windshield glass waste utilization. The research was performed in cooperation with the Polish small company, active in the waste utilization. Manufacturing of the light weight aggregates (LWAs) for application in the building concrete has been chosen as an appropriate solution. The local coal mine slates, the fine-grained coal mine wastes and fly ash from the local power station were tried for making the suitable mixture for granulation and sintering. All waste materials were characterized for their granulation, chemical composition and thermal behavior (DTA, TG/DTG, linear changes). Several mixtures with various composition were prepared, milled, homogenized and pelletized with water addition and finally sintered at 950°C. Thermally treated granules were tested for their density, porosity and mechanical properties. Some specimens were observed in scanning microscope. It has been shown that by variation of the composition of the waste materials it is possible to produce aggregates with a large variety of mechanical properties and porosities.

AB - The aim of those research was to find out the technique of the car windshield glass waste utilization. The research was performed in cooperation with the Polish small company, active in the waste utilization. Manufacturing of the light weight aggregates (LWAs) for application in the building concrete has been chosen as an appropriate solution. The local coal mine slates, the fine-grained coal mine wastes and fly ash from the local power station were tried for making the suitable mixture for granulation and sintering. All waste materials were characterized for their granulation, chemical composition and thermal behavior (DTA, TG/DTG, linear changes). Several mixtures with various composition were prepared, milled, homogenized and pelletized with water addition and finally sintered at 950°C. Thermally treated granules were tested for their density, porosity and mechanical properties. Some specimens were observed in scanning microscope. It has been shown that by variation of the composition of the waste materials it is possible to produce aggregates with a large variety of mechanical properties and porosities.

KW - Porous granules

KW - Utilization

KW - Waste materials

KW - Windshield glass

UR - https://www.scopus.com/pages/publications/85028979883

U2 - 10.4028/www.scientific.net/MSF.904.174

DO - 10.4028/www.scientific.net/MSF.904.174

M3 - Conference contribution

AN - SCOPUS:85028979883

SN - 9783035711929

T3 - Materials Science Forum

SP - 174

EP - 178

BT - Metallurgy Technology and Materials V - 5th ICMTM

A2 - Harun, Zawati

PB - Trans Tech Publications Ltd.

T2 - 5th International Conference on Metallurgy Technology and Materials, ICMTM 2017

Y2 - 15 April 2017 through 16 April 2017

ER -

Manufacturing of light weight aggregates from the local waste materials for application in the building concrete

Abstract

Publication series

Conference

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this