Impact of 3D Printing Materials on Bone Phantom Features

Marta Kiel-Jamrozik; Wojciech Jamrozik; Mateusz Pawlik; Jakub Goczyla

doi:10.1007/978-3-030-99112-8_19

Impact of 3D Printing Materials on Bone Phantom Features

CABIOMEDE Sp. Z O.O.
Silesian University of Technology

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

1 Citation (Scopus)

Abstract

Bone drilling is a common orthopedic procedure used to produce drill holes for screw insertion to repair fractured bone. Hole quality depends not only on the drill geometry but also on the cutting parameters, drilling force, and drilling technique, therefore, skilled personnel are required to successfully perform bone drilling. The drilling process should limit the generation of heat (thermal energy) to avoid osteonecrosis caused by interrupted blood supply to bone tissue. Studies were performed to determine the optimal material type and infill percentage for fabricating bone phantoms via 3D printing. Phantoms made from PA, PLA, and PET were produced using different infill percentages. Our results show large differences in quality among certain materials and demonstrate that 3D printing can be successfully used for manufacturing bone phantoms.

Original language	English
Title of host publication	Lecture Notes in Networks and Systems
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	179-186
Number of pages	8
DOIs	https://doi.org/10.1007/978-3-030-99112-8_19
Publication status	Published - 2023

Publication series

Name	Lecture Notes in Networks and Systems
Volume	409
ISSN (Print)	2367-3370
ISSN (Electronic)	2367-3389

Keywords

3D printing
Bone phantom
Thermovision

ASJC Scopus subject areas

Control and Systems Engineering
Signal Processing
Computer Networks and Communications

Access to Document

10.1007/978-3-030-99112-8_19

Cite this

@inbook{1f670da51c014f429bcf281d4c8f20e0,

title = "Impact of 3D Printing Materials on Bone Phantom Features",

abstract = "Bone drilling is a common orthopedic procedure used to produce drill holes for screw insertion to repair fractured bone. Hole quality depends not only on the drill geometry but also on the cutting parameters, drilling force, and drilling technique, therefore, skilled personnel are required to successfully perform bone drilling. The drilling process should limit the generation of heat (thermal energy) to avoid osteonecrosis caused by interrupted blood supply to bone tissue. Studies were performed to determine the optimal material type and infill percentage for fabricating bone phantoms via 3D printing. Phantoms made from PA, PLA, and PET were produced using different infill percentages. Our results show large differences in quality among certain materials and demonstrate that 3D printing can be successfully used for manufacturing bone phantoms.",

keywords = "3D printing, Bone phantom, Thermovision",

author = "Marta Kiel-Jamrozik and Wojciech Jamrozik and Mateusz Pawlik and Jakub Goczyla",

note = "Publisher Copyright: {\textcopyright} 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.",

year = "2023",

doi = "10.1007/978-3-030-99112-8\_19",

language = "English",

series = "Lecture Notes in Networks and Systems",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "179--186",

booktitle = "Lecture Notes in Networks and Systems",

address = "Germany",

}

Impact of 3D Printing Materials on Bone Phantom Features. / Kiel-Jamrozik, Marta ; Jamrozik, Wojciech ; Pawlik, Mateusz et al.
Lecture Notes in Networks and Systems. Springer Science and Business Media Deutschland GmbH, 2023. p. 179-186 (Lecture Notes in Networks and Systems; Vol. 409).

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

TY - CHAP

T1 - Impact of 3D Printing Materials on Bone Phantom Features

AU - Kiel-Jamrozik, Marta

AU - Jamrozik, Wojciech

AU - Pawlik, Mateusz

AU - Goczyla, Jakub

PY - 2023

Y1 - 2023

N2 - Bone drilling is a common orthopedic procedure used to produce drill holes for screw insertion to repair fractured bone. Hole quality depends not only on the drill geometry but also on the cutting parameters, drilling force, and drilling technique, therefore, skilled personnel are required to successfully perform bone drilling. The drilling process should limit the generation of heat (thermal energy) to avoid osteonecrosis caused by interrupted blood supply to bone tissue. Studies were performed to determine the optimal material type and infill percentage for fabricating bone phantoms via 3D printing. Phantoms made from PA, PLA, and PET were produced using different infill percentages. Our results show large differences in quality among certain materials and demonstrate that 3D printing can be successfully used for manufacturing bone phantoms.

AB - Bone drilling is a common orthopedic procedure used to produce drill holes for screw insertion to repair fractured bone. Hole quality depends not only on the drill geometry but also on the cutting parameters, drilling force, and drilling technique, therefore, skilled personnel are required to successfully perform bone drilling. The drilling process should limit the generation of heat (thermal energy) to avoid osteonecrosis caused by interrupted blood supply to bone tissue. Studies were performed to determine the optimal material type and infill percentage for fabricating bone phantoms via 3D printing. Phantoms made from PA, PLA, and PET were produced using different infill percentages. Our results show large differences in quality among certain materials and demonstrate that 3D printing can be successfully used for manufacturing bone phantoms.

KW - 3D printing

KW - Bone phantom

KW - Thermovision

UR - https://www.scopus.com/pages/publications/85131814221

U2 - 10.1007/978-3-030-99112-8_19

DO - 10.1007/978-3-030-99112-8_19

M3 - Chapter

AN - SCOPUS:85131814221

T3 - Lecture Notes in Networks and Systems

SP - 179

EP - 186

BT - Lecture Notes in Networks and Systems

PB - Springer Science and Business Media Deutschland GmbH

ER -