Fuzzy Controller in the Products Collecting System of the Jig for Minerals Beneficiation

Sebastian Jendrysik; Daniel Kowol; Piotr Matusiak; Andrzej Dymarek; Krzysztof Kędzia; Bartosz Polnik; Marcin Szczygieł; Tomasz Trawiński; Mariusz Starak

doi:10.3390/electronics12030772

Fuzzy Controller in the Products Collecting System of the Jig for Minerals Beneficiation

Sebastian Jendrysik
, Daniel Kowol
, Piotr Matusiak
, Andrzej Dymarek
, Krzysztof Kędzia
, Bartosz Polnik
, Marcin Szczygieł
, Tomasz Trawiński
, Mariusz Starak

KOMAG Institute of Mining Technology
Faculty of Mechanical Engineering
Silesian University of Technology

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Abstract

The fuzzy controller of the bottom product collecting system of the pulsating jig is presented. The primary purpose of the research work was to design and properly adapt the fuzzy controller so that it would enable the correct operation of the jig with appropriate control properties in all compartments of the jig. The results of industrial tests, in which selected indicators of regulation quality were considered, were analyzed. A comparative analysis of the tested fuzzy controller and the classic PID controller was also performed.

Original language	English
Article number	772
Journal	Electronics (Switzerland)
Volume	12
Issue number	3
DOIs	https://doi.org/10.3390/electronics12030772
Publication status	Published - Feb 2023

Keywords

PID
coal mine
control system
fuzzy controller
jig

ASJC Scopus subject areas

Control and Systems Engineering
Signal Processing
Hardware and Architecture
Computer Networks and Communications
Electrical and Electronic Engineering

Access to Document

10.3390/electronics12030772

Cite this

@article{60dcaffa5a484072b81cacabcb2f5565,

title = "Fuzzy Controller in the Products Collecting System of the Jig for Minerals Beneficiation",

abstract = "The fuzzy controller of the bottom product collecting system of the pulsating jig is presented. The primary purpose of the research work was to design and properly adapt the fuzzy controller so that it would enable the correct operation of the jig with appropriate control properties in all compartments of the jig. The results of industrial tests, in which selected indicators of regulation quality were considered, were analyzed. A comparative analysis of the tested fuzzy controller and the classic PID controller was also performed.",

keywords = "PID, coal mine, control system, fuzzy controller, jig",

author = "Sebastian Jendrysik and Daniel Kowol and Piotr Matusiak and Andrzej Dymarek and Krzysztof K{\c e}dzia and Bartosz Polnik and Marcin Szczygie{\l} and Tomasz Trawi{\'n}ski and Mariusz Starak",

note = "Publisher Copyright: {\textcopyright} 2023 by the authors.",

year = "2023",

month = feb,

doi = "10.3390/electronics12030772",

language = "English",

volume = "12",

journal = "Electronics (Switzerland)",

issn = "2079-9292",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "3",

}

TY - JOUR

T1 - Fuzzy Controller in the Products Collecting System of the Jig for Minerals Beneficiation

AU - Jendrysik, Sebastian

AU - Kowol, Daniel

AU - Matusiak, Piotr

AU - Dymarek, Andrzej

AU - Kędzia, Krzysztof

AU - Polnik, Bartosz

AU - Szczygieł, Marcin

AU - Trawiński, Tomasz

AU - Starak, Mariusz

PY - 2023/2

Y1 - 2023/2

N2 - The fuzzy controller of the bottom product collecting system of the pulsating jig is presented. The primary purpose of the research work was to design and properly adapt the fuzzy controller so that it would enable the correct operation of the jig with appropriate control properties in all compartments of the jig. The results of industrial tests, in which selected indicators of regulation quality were considered, were analyzed. A comparative analysis of the tested fuzzy controller and the classic PID controller was also performed.

AB - The fuzzy controller of the bottom product collecting system of the pulsating jig is presented. The primary purpose of the research work was to design and properly adapt the fuzzy controller so that it would enable the correct operation of the jig with appropriate control properties in all compartments of the jig. The results of industrial tests, in which selected indicators of regulation quality were considered, were analyzed. A comparative analysis of the tested fuzzy controller and the classic PID controller was also performed.

KW - PID

KW - coal mine

KW - control system

KW - fuzzy controller

KW - jig

UR - https://www.scopus.com/pages/publications/85147831465

U2 - 10.3390/electronics12030772

DO - 10.3390/electronics12030772

M3 - Article

AN - SCOPUS:85147831465

SN - 2079-9292

VL - 12

JO - Electronics (Switzerland)

JF - Electronics (Switzerland)

IS - 3

M1 - 772

ER -

Fuzzy Controller in the Products Collecting System of the Jig for Minerals Beneficiation

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this