FEM Simulation and Analysis of a Concept 3D Printed Electric Motor with Permanent Magnets

Hryhorii Stakhiv; Oleg Solomchak; Pawel Lasek; Mariusz Stepien

doi:10.1109/PEMC48073.2021.9432529

FEM Simulation and Analysis of a Concept 3D Printed Electric Motor with Permanent Magnets

Hryhorii Stakhiv
, Oleg Solomchak
, Pawel Lasek
, Mariusz Stepien

Department of Power Electronics, Electrical Drives and Robotics (RE/RE5)

Ivano-Frankivsk National Technical University of Oil and Gas

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

The increased popularity of FDM printers expands the possibilities of manufacturing components and devices that were only possible by institutions with specialized equipment. Although not perfect in every sense, the 3D printed objects are promising supplementation for student projects that previously were only ending at the design stage. The possibility of designing and creating a functional rotating electrical machine is explored in the following paper. The material properties are derived from the measurements that allow for numerical simulations that reveal some features of such created devices.

Original language	English
Title of host publication	Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	656-660
Number of pages	5
ISBN (Electronic)	9781728156606
DOIs	https://doi.org/10.1109/PEMC48073.2021.9432529
Publication status	Published - 25 Apr 2021
Event	19th IEEE International Power Electronics and Motion Control Conference, PEMC 2021 - Gliwice, Poland Duration: 25 Apr 2021 → 29 Apr 2021

Publication series

Name	Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021

Conference

Conference	19th IEEE International Power Electronics and Motion Control Conference, PEMC 2021
Country/Territory	Poland
City	Gliwice
Period	25/04/21 → 29/04/21

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

Brushless machines
Electrical engineering education
Magnetic cores
Stators
Three-dimensional printing

ASJC Scopus subject areas

Energy Engineering and Power Technology
Aerospace Engineering
Control and Optimization

Access to Document

10.1109/PEMC48073.2021.9432529

Cite this

Stakhiv, H., Solomchak, O., Lasek, P., & Stepien, M. (2021). FEM Simulation and Analysis of a Concept 3D Printed Electric Motor with Permanent Magnets. In Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021 (pp. 656-660). Article 9432529 (Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PEMC48073.2021.9432529

Stakhiv, Hryhorii ; Solomchak, Oleg ; Lasek, Pawel et al. / FEM Simulation and Analysis of a Concept 3D Printed Electric Motor with Permanent Magnets. Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021. Institute of Electrical and Electronics Engineers Inc., 2021. pp. 656-660 (Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021).

@inproceedings{40d65f275ac9436db14b8a397285d912,

title = "FEM Simulation and Analysis of a Concept 3D Printed Electric Motor with Permanent Magnets",

abstract = "The increased popularity of FDM printers expands the possibilities of manufacturing components and devices that were only possible by institutions with specialized equipment. Although not perfect in every sense, the 3D printed objects are promising supplementation for student projects that previously were only ending at the design stage. The possibility of designing and creating a functional rotating electrical machine is explored in the following paper. The material properties are derived from the measurements that allow for numerical simulations that reveal some features of such created devices.",

keywords = "Brushless machines, Electrical engineering education, Magnetic cores, Stators, Three-dimensional printing",

author = "Hryhorii Stakhiv and Oleg Solomchak and Pawel Lasek and Mariusz Stepien",

note = "Publisher Copyright: {\textcopyright} 2021 IEEE.; 19th IEEE International Power Electronics and Motion Control Conference, PEMC 2021 ; Conference date: 25-04-2021 Through 29-04-2021",

year = "2021",

month = apr,

day = "25",

doi = "10.1109/PEMC48073.2021.9432529",

language = "English",

series = "Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "656--660",

booktitle = "Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021",

address = "United States",

}

Stakhiv, H, Solomchak, O, Lasek, P & Stepien, M 2021, FEM Simulation and Analysis of a Concept 3D Printed Electric Motor with Permanent Magnets. in Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021., 9432529, Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021, Institute of Electrical and Electronics Engineers Inc., pp. 656-660, 19th IEEE International Power Electronics and Motion Control Conference, PEMC 2021, Gliwice, Poland, 25/04/21. https://doi.org/10.1109/PEMC48073.2021.9432529

FEM Simulation and Analysis of a Concept 3D Printed Electric Motor with Permanent Magnets. / Stakhiv, Hryhorii; Solomchak, Oleg; Lasek, Pawel et al.
Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021. Institute of Electrical and Electronics Engineers Inc., 2021. p. 656-660 9432529 (Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - FEM Simulation and Analysis of a Concept 3D Printed Electric Motor with Permanent Magnets

AU - Stakhiv, Hryhorii

AU - Solomchak, Oleg

AU - Lasek, Pawel

AU - Stepien, Mariusz

PY - 2021/4/25

Y1 - 2021/4/25

N2 - The increased popularity of FDM printers expands the possibilities of manufacturing components and devices that were only possible by institutions with specialized equipment. Although not perfect in every sense, the 3D printed objects are promising supplementation for student projects that previously were only ending at the design stage. The possibility of designing and creating a functional rotating electrical machine is explored in the following paper. The material properties are derived from the measurements that allow for numerical simulations that reveal some features of such created devices.

AB - The increased popularity of FDM printers expands the possibilities of manufacturing components and devices that were only possible by institutions with specialized equipment. Although not perfect in every sense, the 3D printed objects are promising supplementation for student projects that previously were only ending at the design stage. The possibility of designing and creating a functional rotating electrical machine is explored in the following paper. The material properties are derived from the measurements that allow for numerical simulations that reveal some features of such created devices.

KW - Brushless machines

KW - Electrical engineering education

KW - Magnetic cores

KW - Stators

KW - Three-dimensional printing

UR - https://www.scopus.com/pages/publications/85107467776

U2 - 10.1109/PEMC48073.2021.9432529

DO - 10.1109/PEMC48073.2021.9432529

M3 - Conference contribution

AN - SCOPUS:85107467776

T3 - Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021

SP - 656

EP - 660

BT - Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 19th IEEE International Power Electronics and Motion Control Conference, PEMC 2021

Y2 - 25 April 2021 through 29 April 2021

ER -

Stakhiv H, Solomchak O, Lasek P , Stepien M. FEM Simulation and Analysis of a Concept 3D Printed Electric Motor with Permanent Magnets. In Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021. Institute of Electrical and Electronics Engineers Inc. 2021. p. 656-660. 9432529. (Proceedings - 2021 IEEE 19th International Power Electronics and Motion Control Conference, PEMC 2021). doi: 10.1109/PEMC48073.2021.9432529

FEM Simulation and Analysis of a Concept 3D Printed Electric Motor with Permanent Magnets

Abstract

Publication series

Conference

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this