Experimental Study on Co-gasification of Wood Biomass and Post-extraction Rapeseed Meal: Methane-Rich Gasification

Danuta Król; Sławomir Poskrobko

doi:10.1021/acs.energyfuels.6b02163

Experimental Study on Co-gasification of Wood Biomass and Post-extraction Rapeseed Meal: Methane-Rich Gasification

Danuta Król
, Sławomir Poskrobko

Department of Technologies and Installations for Waste Management (RIE/RIE3)

Białystok University of Technology

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

Abstract

The paper presents laboratory research on a new manufacturing technology of high-methane synthesis gas from biofuels, such as pine wood biomass and post-extraction rapeseed meal. The study was conducted in the gasifier with a power of 5 kW. As a result, the content of CH₄ in the syngas is from 5 to approximately 15%. The calorific value of the syngas [lower heating value (LHV)], depending upon the content of the preparation in the fuel (0-30%), varied from 4 to 9 MJ/Nm³. Exothermic balance of the gasification process was established for the following technological parameters: temperature over the grate, T₁ = 800°C, temperature in the fuel layer, T₂ = 450°C, and temperature over the fuel layer, T₃ = 850°C.

Original language	English
Pages (from-to)	3935-3942
Number of pages	8
Journal	Energy and Fuels
Volume	31
Issue number	4
DOIs	https://doi.org/10.1021/acs.energyfuels.6b02163
Publication status	Published - 20 Apr 2017

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy
SDG 9 Industry, Innovation, and Infrastructure

ASJC Scopus subject areas

General Chemical Engineering
Fuel Technology
Energy Engineering and Power Technology

Access to Document

10.1021/acs.energyfuels.6b02163

Cite this

@article{f9a702c8c5c74761aced82f3063e0723,

title = "Experimental Study on Co-gasification of Wood Biomass and Post-extraction Rapeseed Meal: Methane-Rich Gasification",

abstract = "The paper presents laboratory research on a new manufacturing technology of high-methane synthesis gas from biofuels, such as pine wood biomass and post-extraction rapeseed meal. The study was conducted in the gasifier with a power of 5 kW. As a result, the content of CH4 in the syngas is from 5 to approximately 15\%. The calorific value of the syngas [lower heating value (LHV)], depending upon the content of the preparation in the fuel (0-30\%), varied from 4 to 9 MJ/Nm3. Exothermic balance of the gasification process was established for the following technological parameters: temperature over the grate, T1 = 800°C, temperature in the fuel layer, T2 = 450°C, and temperature over the fuel layer, T3 = 850°C.",

author = "Danuta Kr{\'o}l and S{\l}awomir Poskrobko",

note = "Publisher Copyright: {\textcopyright} 2017 American Chemical Society.",

year = "2017",

month = apr,

day = "20",

doi = "10.1021/acs.energyfuels.6b02163",

language = "English",

volume = "31",

pages = "3935--3942",

journal = "Energy and Fuels",

issn = "0887-0624",

publisher = "American Chemical Society",

number = "4",

}

TY - JOUR

T1 - Experimental Study on Co-gasification of Wood Biomass and Post-extraction Rapeseed Meal

T2 - Methane-Rich Gasification

AU - Król, Danuta

AU - Poskrobko, Sławomir

PY - 2017/4/20

Y1 - 2017/4/20

N2 - The paper presents laboratory research on a new manufacturing technology of high-methane synthesis gas from biofuels, such as pine wood biomass and post-extraction rapeseed meal. The study was conducted in the gasifier with a power of 5 kW. As a result, the content of CH4 in the syngas is from 5 to approximately 15%. The calorific value of the syngas [lower heating value (LHV)], depending upon the content of the preparation in the fuel (0-30%), varied from 4 to 9 MJ/Nm3. Exothermic balance of the gasification process was established for the following technological parameters: temperature over the grate, T1 = 800°C, temperature in the fuel layer, T2 = 450°C, and temperature over the fuel layer, T3 = 850°C.

AB - The paper presents laboratory research on a new manufacturing technology of high-methane synthesis gas from biofuels, such as pine wood biomass and post-extraction rapeseed meal. The study was conducted in the gasifier with a power of 5 kW. As a result, the content of CH4 in the syngas is from 5 to approximately 15%. The calorific value of the syngas [lower heating value (LHV)], depending upon the content of the preparation in the fuel (0-30%), varied from 4 to 9 MJ/Nm3. Exothermic balance of the gasification process was established for the following technological parameters: temperature over the grate, T1 = 800°C, temperature in the fuel layer, T2 = 450°C, and temperature over the fuel layer, T3 = 850°C.

UR - https://www.scopus.com/pages/publications/85020383342

U2 - 10.1021/acs.energyfuels.6b02163

DO - 10.1021/acs.energyfuels.6b02163

M3 - Article

AN - SCOPUS:85020383342

SN - 0887-0624

VL - 31

SP - 3935

EP - 3942

JO - Energy and Fuels

JF - Energy and Fuels

IS - 4

ER -

Experimental Study on Co-gasification of Wood Biomass and Post-extraction Rapeseed Meal: Methane-Rich Gasification

Abstract

UN SDGs

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this