TY - GEN
T1 - Electrochemical properties of Ni-Cr and Co-Cr alloys used in prosthodontics
AU - Pochrza̧st, M.
AU - Marciniak, J.
AU - Wróbel, K.
AU - Ba̧czkowski, B.
PY - 2012
Y1 - 2012
N2 - The aim of the work was evaluation of electrochemical properties of Co-based alloys (Remanium GM 800+ and Biosil F) and Ni-based alloys (Heraenium NA and Remanium G-Soft) commonly used on frameworks for porcelain faced cast partial dentures. First stage of the work was evaluation of surface roughness by means of direct linear contact measurement (SURTRONIC 3+ profiler, Taylor/Hobson) of samples after casting and surface treatment. Electrochemical properties of surface were assessed by means of potentiodynamic and impedance methods. In potentiodynamic tests, in order to evaluate pitting corrosion resistance of the analyzed alloys, anodic polarization curves were recorded. The VoltaLab® PGP 201 system was applied in corrosion tests. Moreover, in order to evaluate structure and properties of the surface layer the electrochemical impedance spectroscopy (EIS) was applied. Selection of this method enabled to determine the impedance of the material - surface layer - solution interface with the use of approximation of impedance data by means of equivalent electric circuit model. The EIS tests were carried out with the use of the AutoLab PGSTAT 302N system equipped with the FRA2 Faraday impedance module. Electrochemical tests were carried out in artificial saliva at the temperature of 37°C and pH = 7,0±0,1.
AB - The aim of the work was evaluation of electrochemical properties of Co-based alloys (Remanium GM 800+ and Biosil F) and Ni-based alloys (Heraenium NA and Remanium G-Soft) commonly used on frameworks for porcelain faced cast partial dentures. First stage of the work was evaluation of surface roughness by means of direct linear contact measurement (SURTRONIC 3+ profiler, Taylor/Hobson) of samples after casting and surface treatment. Electrochemical properties of surface were assessed by means of potentiodynamic and impedance methods. In potentiodynamic tests, in order to evaluate pitting corrosion resistance of the analyzed alloys, anodic polarization curves were recorded. The VoltaLab® PGP 201 system was applied in corrosion tests. Moreover, in order to evaluate structure and properties of the surface layer the electrochemical impedance spectroscopy (EIS) was applied. Selection of this method enabled to determine the impedance of the material - surface layer - solution interface with the use of approximation of impedance data by means of equivalent electric circuit model. The EIS tests were carried out with the use of the AutoLab PGSTAT 302N system equipped with the FRA2 Faraday impedance module. Electrochemical tests were carried out in artificial saliva at the temperature of 37°C and pH = 7,0±0,1.
KW - Co-Cr alloys
KW - EIS
KW - Ni-Cr alloys
KW - Pitting corrosion resistance
UR - https://www.scopus.com/pages/publications/84855698425
U2 - 10.4028/www.scientific.net/SSP.183.143
DO - 10.4028/www.scientific.net/SSP.183.143
M3 - Conference contribution
AN - SCOPUS:84855698425
SN - 9783037853207
T3 - Solid State Phenomena
SP - 143
EP - 148
BT - Environmental Degradation of Engineering Materials and Materials Engineering and Technologies, EDEMET2011
PB - Trans Tech Publications Ltd.
T2 - 4th International Conference on Environmental Degradation of Engineering Materials and 5th International Conference on Materials Engineering and Technologies, EDEMET2011
Y2 - 15 May 2011 through 18 May 2011
ER -