Corrosion resistance of the ZnAl40Cu(1-2)Ti(1-2) alloys in an “acid rain” environment

Agnieszka Tomaszewska; Rafał Michalik; Magdalena Jabłońska

doi:10.4028/www.scientific.net/SSP.246.109

Corrosion resistance of the ZnAl40Cu(1-2)Ti(1-2) alloys in an “acid rain” environment

Agnieszka Tomaszewska
, Rafał Michalik
, Magdalena Jabłońska

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Abstract

The purpose of the examination was to determine the corrosion resistance of ZnAl40Cu(1-2)Ti(1-2) alloys in an "acid rain". Subject of test were ZnAl40Cu2Ti, ZnAl40Ti2Cu1.5Ti1.5 and ZnAl40Ti2Cu alloys. The scope of the test included galvanostatic, potentiodynamic tests and examination of the surface of the samples after corrosion. It was found, that the ZnAl40Cu2Ti alloy is characterized by the highest corrosion resistance among the tested alloys. Tests have shown that with a decrease in copper content in the tested alloys decreases corrosion resistance. It was also found that the corrosion of alloys tested in an "acid rain" is local.

Original language	English
Title of host publication	Technologies and Properties of Modern Utility Materials XXIII
Editors	Agnieszka Szczotok, Agnieszka Szkliniarz, Jacek Mendala
Publisher	Trans Tech Publications Ltd.
Pages	109-112
Number of pages	4
ISBN (Print)	9783038355212
DOIs	https://doi.org/10.4028/www.scientific.net/SSP.246.109
Publication status	Published - 2016
Event	23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015 - Katowice, Poland Duration: 15 May 2015 → 15 May 2015

Publication series

Name	Solid State Phenomena
Volume	246
ISSN (Print)	1012-0394
ISSN (Electronic)	1662-9779

Conference

Conference	23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015
Country/Territory	Poland
City	Katowice
Period	15/05/15 → 15/05/15

Keywords

Corrosion
Ti addition
Zn-Al-Cu alloys

ASJC Scopus subject areas

Atomic and Molecular Physics, and Optics
General Materials Science
Condensed Matter Physics

Access to Document

10.4028/www.scientific.net/SSP.246.109

Cite this

Tomaszewska, A., Michalik, R., & Jabłońska, M. (2016). Corrosion resistance of the ZnAl40Cu(1-2)Ti(1-2) alloys in an “acid rain” environment. In A. Szczotok, A. Szkliniarz, & J. Mendala (Eds.), Technologies and Properties of Modern Utility Materials XXIII (pp. 109-112). (Solid State Phenomena; Vol. 246). Trans Tech Publications Ltd.. https://doi.org/10.4028/www.scientific.net/SSP.246.109

@inproceedings{27902b1d67454557bd10fda94a314488,

title = "Corrosion resistance of the ZnAl40Cu(1-2)Ti(1-2) alloys in an {\textquotedblleft}acid rain{\textquotedblright} environment",

abstract = "The purpose of the examination was to determine the corrosion resistance of ZnAl40Cu(1-2)Ti(1-2) alloys in an {"}acid rain{"}. Subject of test were ZnAl40Cu2Ti, ZnAl40Ti2Cu1.5Ti1.5 and ZnAl40Ti2Cu alloys. The scope of the test included galvanostatic, potentiodynamic tests and examination of the surface of the samples after corrosion. It was found, that the ZnAl40Cu2Ti alloy is characterized by the highest corrosion resistance among the tested alloys. Tests have shown that with a decrease in copper content in the tested alloys decreases corrosion resistance. It was also found that the corrosion of alloys tested in an {"}acid rain{"} is local.",

keywords = "Corrosion, Ti addition, Zn-Al-Cu alloys",

author = "Agnieszka Tomaszewska and Rafa{\l} Michalik and Magdalena Jab{\l}o{\'n}ska",

note = "Publisher Copyright: {\textcopyright} 2016 Trans Tech Publications.; 23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015 ; Conference date: 15-05-2015 Through 15-05-2015",

year = "2016",

doi = "10.4028/www.scientific.net/SSP.246.109",

language = "English",

isbn = "9783038355212",

series = "Solid State Phenomena",

publisher = "Trans Tech Publications Ltd.",

pages = "109--112",

editor = "Agnieszka Szczotok and Agnieszka Szkliniarz and Jacek Mendala",

booktitle = "Technologies and Properties of Modern Utility Materials XXIII",

address = "Switzerland",

}

Tomaszewska, A , Michalik, R & Jabłońska, M 2016, Corrosion resistance of the ZnAl40Cu(1-2)Ti(1-2) alloys in an “acid rain” environment. in A Szczotok, A Szkliniarz & J Mendala (eds), Technologies and Properties of Modern Utility Materials XXIII. Solid State Phenomena, vol. 246, Trans Tech Publications Ltd., pp. 109-112, 23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015, Katowice, Poland, 15/05/15. https://doi.org/10.4028/www.scientific.net/SSP.246.109

Corrosion resistance of the ZnAl40Cu(1-2)Ti(1-2) alloys in an “acid rain” environment. / Tomaszewska, Agnieszka ; Michalik, Rafał; Jabłońska, Magdalena.
Technologies and Properties of Modern Utility Materials XXIII. ed. / Agnieszka Szczotok; Agnieszka Szkliniarz; Jacek Mendala. Trans Tech Publications Ltd., 2016. p. 109-112 (Solid State Phenomena; Vol. 246).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Corrosion resistance of the ZnAl40Cu(1-2)Ti(1-2) alloys in an “acid rain” environment

AU - Tomaszewska, Agnieszka

AU - Michalik, Rafał

AU - Jabłońska, Magdalena

PY - 2016

Y1 - 2016

N2 - The purpose of the examination was to determine the corrosion resistance of ZnAl40Cu(1-2)Ti(1-2) alloys in an "acid rain". Subject of test were ZnAl40Cu2Ti, ZnAl40Ti2Cu1.5Ti1.5 and ZnAl40Ti2Cu alloys. The scope of the test included galvanostatic, potentiodynamic tests and examination of the surface of the samples after corrosion. It was found, that the ZnAl40Cu2Ti alloy is characterized by the highest corrosion resistance among the tested alloys. Tests have shown that with a decrease in copper content in the tested alloys decreases corrosion resistance. It was also found that the corrosion of alloys tested in an "acid rain" is local.

AB - The purpose of the examination was to determine the corrosion resistance of ZnAl40Cu(1-2)Ti(1-2) alloys in an "acid rain". Subject of test were ZnAl40Cu2Ti, ZnAl40Ti2Cu1.5Ti1.5 and ZnAl40Ti2Cu alloys. The scope of the test included galvanostatic, potentiodynamic tests and examination of the surface of the samples after corrosion. It was found, that the ZnAl40Cu2Ti alloy is characterized by the highest corrosion resistance among the tested alloys. Tests have shown that with a decrease in copper content in the tested alloys decreases corrosion resistance. It was also found that the corrosion of alloys tested in an "acid rain" is local.

KW - Corrosion

KW - Ti addition

KW - Zn-Al-Cu alloys

UR - https://www.scopus.com/pages/publications/84959089801

U2 - 10.4028/www.scientific.net/SSP.246.109

DO - 10.4028/www.scientific.net/SSP.246.109

M3 - Conference contribution

AN - SCOPUS:84959089801

SN - 9783038355212

T3 - Solid State Phenomena

SP - 109

EP - 112

BT - Technologies and Properties of Modern Utility Materials XXIII

A2 - Szczotok, Agnieszka

A2 - Szkliniarz, Agnieszka

A2 - Mendala, Jacek

PB - Trans Tech Publications Ltd.

T2 - 23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015

Y2 - 15 May 2015 through 15 May 2015

ER -

Corrosion resistance of the ZnAl40Cu(1-2)Ti(1-2) alloys in an “acid rain” environment

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this