Skip to main navigation Skip to search Skip to main content

Complex corrosion properties of aisi 316L steel prepared by 3D printing technology for possible implant applications

  • VŠB – Technical University of Ostrava

Research output: Contribution to journal › Article › peer-review

55 Citations (Scopus)

Abstract

This paper deals with the investigation of complex corrosion properties of 3D printed AISI 316L steel and the influence of additional heat treatment on the resulting corrosion and mechanical parameters. There was an isotonic solution used for the simulation of the human body and a diluted sulfuric acid solution for the study of intergranular corrosion damage of the tested samples. There were significant microstructural changes found for each type of heat treatment at 650 and 1050 °C, which resulted in different corrosion properties of the tested samples. There were changes of corrosion potential, corrosion rate and polarization resistance found by the potentiodynamic polarization method. With regard to these results, the most appropriate heat treatment can be applied to applications with intended use in medicine.

Original languageEnglish
Article number1527
JournalMaterials
Volume13
Issue number7
DOIs
Publication statusPublished - 1 Apr 2020

Keywords

  • Additive manufacturing
  • Biocompatibility
  • Corrosion
  • Heat treatment
  • Implants
  • Polarization
  • Wettability

ASJC Scopus subject areas

  • General Materials Science
  • Condensed Matter Physics

Fingerprint

Dive into the research topics of 'Complex corrosion properties of aisi 316L steel prepared by 3D printing technology for possible implant applications'. Together they form a unique fingerprint.

Cite this