Causes of increased number of non-metallic inclusions in filtered steel

Krystian Janiszewski

doi:10.4028/www.scientific.net/SSP.246.244

Causes of increased number of non-metallic inclusions in filtered steel

Krystian Janiszewski

Department of Metallurgy and Recycling (RM/RM2)

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Filtration of liquid steel using filters is the main method of reducing the number of inclusions, especially those larger than 6 μm. However, common phenomenon observed during steel filtration in laboratory conditions is the increased number non-metallic inclusions. These are the smallest inclusions in the Ferret diameter range from 0.5 to 6 μm. This phenomenon concerns only the number of inclusions. The analysis of literature shows that there is no explanation of this in the previous research, for example [1,3]. Therefore, this paper attempts to explain the important relationship that was so far overlooked.

Original language	English
Title of host publication	Technologies and Properties of Modern Utility Materials XXIII
Editors	Agnieszka Szczotok, Agnieszka Szkliniarz, Jacek Mendala
Publisher	Trans Tech Publications Ltd.
Pages	244-247
Number of pages	4
ISBN (Print)	9783038355212
DOIs	https://doi.org/10.4028/www.scientific.net/SSP.246.244
Publication status	Published - 2016
Event	23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015 - Katowice, Poland Duration: 15 May 2015 → 15 May 2015

Publication series

Name	Solid State Phenomena
Volume	246
ISSN (Print)	1012-0394
ISSN (Electronic)	1662-9779

Conference

Conference	23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015
Country/Territory	Poland
City	Katowice
Period	15/05/15 → 15/05/15

Keywords

Ceramic filter
Solid non-metallic inclusions
Steel

ASJC Scopus subject areas

Atomic and Molecular Physics, and Optics
General Materials Science
Condensed Matter Physics

Access to Document

10.4028/www.scientific.net/SSP.246.244

Cite this

@inproceedings{3e5c269a187345399a4ce6becb77cee1,

title = "Causes of increased number of non-metallic inclusions in filtered steel",

abstract = "Filtration of liquid steel using filters is the main method of reducing the number of inclusions, especially those larger than 6 μm. However, common phenomenon observed during steel filtration in laboratory conditions is the increased number non-metallic inclusions. These are the smallest inclusions in the Ferret diameter range from 0.5 to 6 μm. This phenomenon concerns only the number of inclusions. The analysis of literature shows that there is no explanation of this in the previous research, for example [1,3]. Therefore, this paper attempts to explain the important relationship that was so far overlooked.",

keywords = "Ceramic filter, Solid non-metallic inclusions, Steel",

author = "Krystian Janiszewski",

note = "Publisher Copyright: {\textcopyright} 2016 Trans Tech Publications.; 23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015 ; Conference date: 15-05-2015 Through 15-05-2015",

year = "2016",

doi = "10.4028/www.scientific.net/SSP.246.244",

language = "English",

isbn = "9783038355212",

series = "Solid State Phenomena",

publisher = "Trans Tech Publications Ltd.",

pages = "244--247",

editor = "Agnieszka Szczotok and Agnieszka Szkliniarz and Jacek Mendala",

booktitle = "Technologies and Properties of Modern Utility Materials XXIII",

address = "Switzerland",

}

Janiszewski, K 2016, Causes of increased number of non-metallic inclusions in filtered steel. in A Szczotok, A Szkliniarz & J Mendala (eds), Technologies and Properties of Modern Utility Materials XXIII. Solid State Phenomena, vol. 246, Trans Tech Publications Ltd., pp. 244-247, 23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015, Katowice, Poland, 15/05/15. https://doi.org/10.4028/www.scientific.net/SSP.246.244

Causes of increased number of non-metallic inclusions in filtered steel. / Janiszewski, Krystian.
Technologies and Properties of Modern Utility Materials XXIII. ed. / Agnieszka Szczotok; Agnieszka Szkliniarz; Jacek Mendala. Trans Tech Publications Ltd., 2016. p. 244-247 (Solid State Phenomena; Vol. 246).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Causes of increased number of non-metallic inclusions in filtered steel

AU - Janiszewski, Krystian

PY - 2016

Y1 - 2016

N2 - Filtration of liquid steel using filters is the main method of reducing the number of inclusions, especially those larger than 6 μm. However, common phenomenon observed during steel filtration in laboratory conditions is the increased number non-metallic inclusions. These are the smallest inclusions in the Ferret diameter range from 0.5 to 6 μm. This phenomenon concerns only the number of inclusions. The analysis of literature shows that there is no explanation of this in the previous research, for example [1,3]. Therefore, this paper attempts to explain the important relationship that was so far overlooked.

AB - Filtration of liquid steel using filters is the main method of reducing the number of inclusions, especially those larger than 6 μm. However, common phenomenon observed during steel filtration in laboratory conditions is the increased number non-metallic inclusions. These are the smallest inclusions in the Ferret diameter range from 0.5 to 6 μm. This phenomenon concerns only the number of inclusions. The analysis of literature shows that there is no explanation of this in the previous research, for example [1,3]. Therefore, this paper attempts to explain the important relationship that was so far overlooked.

KW - Ceramic filter

KW - Solid non-metallic inclusions

KW - Steel

UR - https://www.scopus.com/pages/publications/84959114166

U2 - 10.4028/www.scientific.net/SSP.246.244

DO - 10.4028/www.scientific.net/SSP.246.244

M3 - Conference contribution

AN - SCOPUS:84959114166

SN - 9783038355212

T3 - Solid State Phenomena

SP - 244

EP - 247

BT - Technologies and Properties of Modern Utility Materials XXIII

A2 - Szczotok, Agnieszka

A2 - Szkliniarz, Agnieszka

A2 - Mendala, Jacek

PB - Trans Tech Publications Ltd.

T2 - 23rd Conference on Technologies and Properties of Modern Utility Materials, TPMUM 2015

Y2 - 15 May 2015 through 15 May 2015

ER -

Causes of increased number of non-metallic inclusions in filtered steel

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this