Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)

Liu Zhu; Anam Sana; Muhammad Tariq Qamar; Ali Bahadur; Guocong Liu; Mohammad Aslam; Ammar Zidan; İsmail Seçkin Çardaklı; Shahid Iqbal; Sajid Mahmood; Muhammad Saad; Khalid M. Alotaibi

doi:10.1038/s41598-025-28805-w

Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)

Liu Zhu
, Anam Sana
, Muhammad Tariq Qamar
, Ali Bahadur
, Guocong Liu
, Mohammad Aslam
, Ammar Zidan
, İsmail Seçkin Çardaklı
, Shahid Iqbal
, Sajid Mahmood
, Muhammad Saad
, Khalid M. Alotaibi

Doctoral School (SD)

School of Chemistry and Materials Engineering
Huizhou University
Department of Chemistry
Forman Christian College
Nanomaterials Research Center
Wenzhou-Kean University
Dorothy and George Hennings College of Science
Kean University
King Abdulaziz University
Biomedical Engineering Department
Al-Mustaqbal University College
Department of Metallurgical and Materials Engineering
Ataturk University
Nottingham Ningbo China Beacons of Excellence Research and Innovation Institute
Functional Materials Group
Gulf University for Science and Technology
Department of Chemistry
King Saud University

Research output: Contribution to journal › Comment/debate

Abstract

Correction to: Scientific Reportshttps://doi.org/10.1038/s41598-025-88072-7, published online 05 February 2025 Table 10 contained citation errors in the original version of this Article. The correct and incorrect data appear below. Incorrect Table 10: Adsorbent Adsorption condition q_m (mg g⁻¹) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 55 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 56 MnTiO₃/TiO₂ Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 57 γ-Fe₂O₃/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 58 Fe₃O₄/Ti₃C₂ Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 55 rGO/ γ-Fe₂O₃ Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 Correct Table 10: Adsorbent Adsorption condition q_m (mg g⁻¹) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 54 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 55 MnTiO₃/TiO₂ Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 56 γ-Fe₂O₃/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 57 Fe₃O₄/Ti₃C₂ Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 58 rGO/ γ-Fe₂O₃ Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 The original Article has been corrected.

Original language	English
Article number	40907
Journal	Scientific Reports
Volume	15
Issue number	1
DOIs	https://doi.org/10.1038/s41598-025-28805-w
Publication status	Published - Dec 2025

ASJC Scopus subject areas

Multidisciplinary

Access to Document

10.1038/s41598-025-28805-w

Fingerprint

Dive into the research topics of 'Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)'. Together they form a unique fingerprint.

Cite this

Zhu, L., Sana, A., Qamar, M. T., Bahadur, A., Liu, G., Aslam, M., Zidan, A., Çardaklı, İ. S., Iqbal, S., Mahmood, S., Saad, M., & Alotaibi, K. M. (2025). Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7). Scientific Reports, 15(1), Article 40907. https://doi.org/10.1038/s41598-025-28805-w

@article{74a79858d0ab4c84afd9b9475d8f6c06,

title = "Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)",

abstract = "Correction to: Scientific Reportshttps://doi.org/10.1038/s41598-025-88072-7, published online 05 February 2025 Table 10 contained citation errors in the original version of this Article. The correct and incorrect data appear below. Incorrect Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 55 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 56 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 57 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 58 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 55 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 Correct Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 54 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 55 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 56 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 57 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 58 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 The original Article has been corrected.",

author = "Liu Zhu and Anam Sana and Qamar, \{Muhammad Tariq\} and Ali Bahadur and Guocong Liu and Mohammad Aslam and Ammar Zidan and {\c C}ardaklı, \{İsmail Se{\c c}kin\} and Shahid Iqbal and Sajid Mahmood and Muhammad Saad and Alotaibi, \{Khalid M.\}",

note = "Publisher Copyright: {\textcopyright} The Author(s) 2025.",

year = "2025",

month = dec,

doi = "10.1038/s41598-025-28805-w",

language = "English",

volume = "15",

journal = "Scientific Reports",

issn = "2045-2322",

publisher = "Nature Research",

number = "1",

}

Zhu, L, Sana, A, Qamar, MT, Bahadur, A, Liu, G, Aslam, M, Zidan, A, Çardaklı, İS, Iqbal, S, Mahmood, S, Saad, M & Alotaibi, KM 2025, 'Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)', Scientific Reports, vol. 15, no. 1, 40907. https://doi.org/10.1038/s41598-025-28805-w

Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7). / Zhu, Liu; Sana, Anam; Qamar, Muhammad Tariq et al.
In: Scientific Reports, Vol. 15, No. 1, 40907, 12.2025.

Research output: Contribution to journal › Comment/debate

TY - JOUR

T1 - Author Correction

T2 - Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)

AU - Zhu, Liu

AU - Sana, Anam

AU - Qamar, Muhammad Tariq

AU - Bahadur, Ali

AU - Liu, Guocong

AU - Aslam, Mohammad

AU - Zidan, Ammar

AU - Çardaklı, İsmail Seçkin

AU - Iqbal, Shahid

AU - Mahmood, Sajid

AU - Saad, Muhammad

AU - Alotaibi, Khalid M.

PY - 2025/12

Y1 - 2025/12

N2 - Correction to: Scientific Reportshttps://doi.org/10.1038/s41598-025-88072-7, published online 05 February 2025 Table 10 contained citation errors in the original version of this Article. The correct and incorrect data appear below. Incorrect Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 55 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 56 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 57 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 58 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 55 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 Correct Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 54 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 55 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 56 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 57 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 58 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 The original Article has been corrected.

AB - Correction to: Scientific Reportshttps://doi.org/10.1038/s41598-025-88072-7, published online 05 February 2025 Table 10 contained citation errors in the original version of this Article. The correct and incorrect data appear below. Incorrect Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 55 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 56 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 57 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 58 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 55 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 Correct Table 10: Adsorbent Adsorption condition qm (mg g−1) References Chitosan-ZnO Adsorbent dose (600 mg/40 mL), dye conc. (2.3 ppm), pH (8), time (180 min.) and temp. (25 ℃) 11.00 54 CuO Adsorbent dose (400 mg/50 mL), dye conc. (20 ppm), pH (11) and time (80 min.) 1.95 55 MnTiO3/TiO2 Adsorbent dose (50 mg/50 mL), dye conc. (20 ppm), pH (7), time (40 min.) and temp. (25 ℃) 11.76 56 γ-Fe2O3/MWCNTs/cellulose Adsorbent dose (70 mg/100 mL), dye conc. (5 ppm), pH (7), time (90 min.) and temp. (40 ℃) 47.61 57 Fe3O4/Ti3C2 Adsorbent dose (30 mg/10 mL), dye conc. (10 ppm), pH (6.5), time (60 min.) and temp. (40 ℃) 3.14 58 rGO/ γ-Fe2O3 Adsorbent dose (200 mg/100 mL), dye conc. (80 ppm), pH (8), time (113 min.) and temp. (25 ℃) 40.64 This study Adsorbent dose (122 mg/100 mL), dye conc. (80 ppm), pH (10), time (113 min.) and temp. (25 ℃) 64.26 The original Article has been corrected.

UR - https://www.scopus.com/pages/publications/105022522366

U2 - 10.1038/s41598-025-28805-w

DO - 10.1038/s41598-025-28805-w

M3 - Comment/debate

C2 - 41266759

AN - SCOPUS:105022522366

SN - 2045-2322

VL - 15

JO - Scientific Reports

JF - Scientific Reports

IS - 1

M1 - 40907

ER -

Author Correction: Response surface methodology for the design of malachite green dye removal by γ-Fe2O3 dispersed on reduced graphene oxide sheets (Scientific Reports, (2025), 15, 1, (4402), 10.1038/s41598-025-88072-7)

Abstract

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this