Anodic oxidation of the Ti–13Nb–13Zr alloy

Michał Mosiałek; Ginter Nawrat; Lilianna Szyk-Warszyńska; Jerzy Żak; Artur Maciej; Krzysztof Radwański; Antoni Winiarski; Jacek Szade; Paweł Nowak; Wojciech Simka

doi:10.1007/s10008-014-2446-7

Anodic oxidation of the Ti–13Nb–13Zr alloy

Michał Mosiałek
, Ginter Nawrat
, Lilianna Szyk-Warszyńska
, Jerzy Żak
, Artur Maciej
, Krzysztof Radwański
, Antoni Winiarski
, Jacek Szade
, Paweł Nowak
, Wojciech Simka

Department of Inorganic Chemistry, Analytical Chemistry and Electrochemistry (RCH/RCH1)

Jerzy Haber Institute of Catalysis and Surface Chemistry PAS
Silesian University of Technology
Upper Silesian Institute of Technology
University of Silesia in Katowice

Research output: Contribution to journal › Article › peer-review

13 Citations (Scopus)

Abstract

This work presents the results of the investigations on the electropolishing and anodic oxidation of the Ti–13Nb–13Zr titanium alloy. Electropolishing was conducted in the solution containing ammonium fluoride and sulfuric acid, whereas the solution of phosphoric acid was used for anodic oxidation of the alloy. The influence of electropolishing and anodization process parameters on the texture (scanning electron microscopy (SEM)) and chemical composition (X-ray photoelectron spectroscopy (XPS)) of the surface layer was established. Electrochemical impedance spectroscopy in 5 % NaCl solution was used for the determination of the corrosion resistance of the alloy.

Original language	English
Pages (from-to)	3073-3080
Number of pages	8
Journal	Journal of Solid State Electrochemistry
Volume	18
Issue number	11
DOIs	https://doi.org/10.1007/s10008-014-2446-7
Publication status	Published - 23 Oct 2014

Keywords

Anodic oxidation
Corrosion resistance
Electropolishing
Ti–13Nb–13Zr alloy

ASJC Scopus subject areas

General Materials Science
Condensed Matter Physics
Energy Engineering and Power Technology
Electrochemistry
Electrical and Electronic Engineering
Materials Chemistry

Access to Document

10.1007/s10008-014-2446-7

Cite this

@article{4227d0ca9c1a454a9173b89b74cf50fd,

title = "Anodic oxidation of the Ti{\textendash}13Nb{\textendash}13Zr alloy",

abstract = "This work presents the results of the investigations on the electropolishing and anodic oxidation of the Ti{\textendash}13Nb{\textendash}13Zr titanium alloy. Electropolishing was conducted in the solution containing ammonium fluoride and sulfuric acid, whereas the solution of phosphoric acid was used for anodic oxidation of the alloy. The influence of electropolishing and anodization process parameters on the texture (scanning electron microscopy (SEM)) and chemical composition (X-ray photoelectron spectroscopy (XPS)) of the surface layer was established. Electrochemical impedance spectroscopy in 5 \% NaCl solution was used for the determination of the corrosion resistance of the alloy.",

keywords = "Anodic oxidation, Corrosion resistance, Electropolishing, Ti{\textendash}13Nb{\textendash}13Zr alloy",

author = "Micha{\l} Mosia{\l}ek and Ginter Nawrat and Lilianna Szyk-Warszy{\'n}ska and Jerzy {\.Z}ak and Artur Maciej and Krzysztof Radwa{\'n}ski and Antoni Winiarski and Jacek Szade and Pawe{\l} Nowak and Wojciech Simka",

note = "Publisher Copyright: {\textcopyright} 2014, The Author(s).",

year = "2014",

month = oct,

day = "23",

doi = "10.1007/s10008-014-2446-7",

language = "English",

volume = "18",

pages = "3073--3080",

journal = "Journal of Solid State Electrochemistry",

issn = "1432-8488",

publisher = "Springer Verlag",

number = "11",

}

TY - JOUR

T1 - Anodic oxidation of the Ti–13Nb–13Zr alloy

AU - Mosiałek, Michał

AU - Nawrat, Ginter

AU - Szyk-Warszyńska, Lilianna

AU - Żak, Jerzy

AU - Maciej, Artur

AU - Radwański, Krzysztof

AU - Winiarski, Antoni

AU - Szade, Jacek

AU - Nowak, Paweł

AU - Simka, Wojciech

PY - 2014/10/23

Y1 - 2014/10/23

N2 - This work presents the results of the investigations on the electropolishing and anodic oxidation of the Ti–13Nb–13Zr titanium alloy. Electropolishing was conducted in the solution containing ammonium fluoride and sulfuric acid, whereas the solution of phosphoric acid was used for anodic oxidation of the alloy. The influence of electropolishing and anodization process parameters on the texture (scanning electron microscopy (SEM)) and chemical composition (X-ray photoelectron spectroscopy (XPS)) of the surface layer was established. Electrochemical impedance spectroscopy in 5 % NaCl solution was used for the determination of the corrosion resistance of the alloy.

AB - This work presents the results of the investigations on the electropolishing and anodic oxidation of the Ti–13Nb–13Zr titanium alloy. Electropolishing was conducted in the solution containing ammonium fluoride and sulfuric acid, whereas the solution of phosphoric acid was used for anodic oxidation of the alloy. The influence of electropolishing and anodization process parameters on the texture (scanning electron microscopy (SEM)) and chemical composition (X-ray photoelectron spectroscopy (XPS)) of the surface layer was established. Electrochemical impedance spectroscopy in 5 % NaCl solution was used for the determination of the corrosion resistance of the alloy.

KW - Anodic oxidation

KW - Corrosion resistance

KW - Electropolishing

KW - Ti–13Nb–13Zr alloy

UR - https://www.scopus.com/pages/publications/84919416465

U2 - 10.1007/s10008-014-2446-7

DO - 10.1007/s10008-014-2446-7

M3 - Article

AN - SCOPUS:84919416465

SN - 1432-8488

VL - 18

SP - 3073

EP - 3080

JO - Journal of Solid State Electrochemistry

JF - Journal of Solid State Electrochemistry

IS - 11

ER -

Anodic oxidation of the Ti–13Nb–13Zr alloy

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this