Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures

Wioleta Rakowska; Mariusz Galiński; Aleksander Gwiazda; Suthep Butdee; Anthony M. Xavior

doi:10.1007/978-3-031-44282-7_55

Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures

Wioleta Rakowska
, Mariusz Galiński
, Aleksander Gwiazda
, Suthep Butdee
, Anthony M. Xavior

Lukasiewicz Research Network-Upper Silesian Institute of Technology
PONAR Wadowice - Zakład w Łaziskach Górnych
Rajamangala University of Technology Krungthep
Vellore Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

When designing technical systems, one of the most important tasks is to determine their operating parameters in target conditions. Most often, these are model activities aimed at conducting tests on model systems or prototypes of the analyzed systems. Conducting such research also involves their proper analysis. This publication presents a solution proposed for such situations. The publication presents an example of testing a hydraulic system at low temperatures, as well as an analysis of test results and a determination of the scope of objectives based on the weighted Ishikawa diagram. The system was tested at −50 ℃ and problems were identified at this temperature. Operational problems at such a low temperature were then analyzed using a 10M fishbone diagram. The obtained results allow both to define further research procedures and to set further research directions. They also allow for the assessment of interactions between identified problems.

Original language	English
Title of host publication	Intelligent Systems in Production Engineering and Maintenance 3
Editors	Anna Burduk, Andre D.L. Batako, José Machado, Ryszrad Wyczółkowski, Ewa Dostatni, Izabela Rojek
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	726-736
Number of pages	11
ISBN (Print)	9783031442810
DOIs	https://doi.org/10.1007/978-3-031-44282-7_55
Publication status	Published - 2024
Event	4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023 - Wrocław, Poland Duration: 13 Sept 2023 → 15 Sept 2023

Publication series

Name	Lecture Notes in Mechanical Engineering
ISSN (Print)	2195-4356
ISSN (Electronic)	2195-4364

Conference

Conference	4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023
Country/Territory	Poland
City	Wrocław
Period	13/09/23 → 15/09/23

Keywords

CAD design
Hydraulic systems
Problems analysis

ASJC Scopus subject areas

Automotive Engineering
Aerospace Engineering
Mechanical Engineering
Fluid Flow and Transfer Processes

Access to Document

10.1007/978-3-031-44282-7_55

Cite this

Rakowska, W., Galiński, M., Gwiazda, A., Butdee, S., & Xavior, A. M. (2024). Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. In A. Burduk, A. D. L. Batako, J. Machado, R. Wyczółkowski, E. Dostatni, & I. Rojek (Eds.), Intelligent Systems in Production Engineering and Maintenance 3 (pp. 726-736). (Lecture Notes in Mechanical Engineering). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-031-44282-7_55

Rakowska, Wioleta ; Galiński, Mariusz ; Gwiazda, Aleksander et al. / Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. Intelligent Systems in Production Engineering and Maintenance 3. editor / Anna Burduk ; Andre D.L. Batako ; José Machado ; Ryszrad Wyczółkowski ; Ewa Dostatni ; Izabela Rojek. Springer Science and Business Media Deutschland GmbH, 2024. pp. 726-736 (Lecture Notes in Mechanical Engineering).

@inproceedings{a33e5a1c91474e4d9ee9478690928f49,

title = "Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures",

abstract = "When designing technical systems, one of the most important tasks is to determine their operating parameters in target conditions. Most often, these are model activities aimed at conducting tests on model systems or prototypes of the analyzed systems. Conducting such research also involves their proper analysis. This publication presents a solution proposed for such situations. The publication presents an example of testing a hydraulic system at low temperatures, as well as an analysis of test results and a determination of the scope of objectives based on the weighted Ishikawa diagram. The system was tested at −50 ℃ and problems were identified at this temperature. Operational problems at such a low temperature were then analyzed using a 10M fishbone diagram. The obtained results allow both to define further research procedures and to set further research directions. They also allow for the assessment of interactions between identified problems.",

keywords = "CAD design, Hydraulic systems, Problems analysis",

author = "Wioleta Rakowska and Mariusz Gali{\'n}ski and Aleksander Gwiazda and Suthep Butdee and Xavior, \{Anthony M.\}",

note = "Publisher Copyright: {\textcopyright} 2024, The Author(s), under exclusive license to Springer Nature Switzerland AG.; 4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023 ; Conference date: 13-09-2023 Through 15-09-2023",

year = "2024",

doi = "10.1007/978-3-031-44282-7\_55",

language = "English",

isbn = "9783031442810",

series = "Lecture Notes in Mechanical Engineering",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "726--736",

editor = "Anna Burduk and Batako, \{Andre D.L.\} and Jos{\'e} Machado and Ryszrad Wycz{\'o}{\l}kowski and Ewa Dostatni and Izabela Rojek",

booktitle = "Intelligent Systems in Production Engineering and Maintenance 3",

address = "Germany",

}

Rakowska, W , Galiński, M , Gwiazda, A, Butdee, S & Xavior, AM 2024, Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. in A Burduk, ADL Batako, J Machado, R Wyczółkowski, E Dostatni & I Rojek (eds), Intelligent Systems in Production Engineering and Maintenance 3. Lecture Notes in Mechanical Engineering, Springer Science and Business Media Deutschland GmbH, pp. 726-736, 4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023, Wrocław, Poland, 13/09/23. https://doi.org/10.1007/978-3-031-44282-7_55

Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. / Rakowska, Wioleta ; Galiński, Mariusz ; Gwiazda, Aleksander et al.
Intelligent Systems in Production Engineering and Maintenance 3. ed. / Anna Burduk; Andre D.L. Batako; José Machado; Ryszrad Wyczółkowski; Ewa Dostatni; Izabela Rojek. Springer Science and Business Media Deutschland GmbH, 2024. p. 726-736 (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures

AU - Rakowska, Wioleta

AU - Galiński, Mariusz

AU - Gwiazda, Aleksander

AU - Butdee, Suthep

AU - Xavior, Anthony M.

PY - 2024

Y1 - 2024

N2 - When designing technical systems, one of the most important tasks is to determine their operating parameters in target conditions. Most often, these are model activities aimed at conducting tests on model systems or prototypes of the analyzed systems. Conducting such research also involves their proper analysis. This publication presents a solution proposed for such situations. The publication presents an example of testing a hydraulic system at low temperatures, as well as an analysis of test results and a determination of the scope of objectives based on the weighted Ishikawa diagram. The system was tested at −50 ℃ and problems were identified at this temperature. Operational problems at such a low temperature were then analyzed using a 10M fishbone diagram. The obtained results allow both to define further research procedures and to set further research directions. They also allow for the assessment of interactions between identified problems.

AB - When designing technical systems, one of the most important tasks is to determine their operating parameters in target conditions. Most often, these are model activities aimed at conducting tests on model systems or prototypes of the analyzed systems. Conducting such research also involves their proper analysis. This publication presents a solution proposed for such situations. The publication presents an example of testing a hydraulic system at low temperatures, as well as an analysis of test results and a determination of the scope of objectives based on the weighted Ishikawa diagram. The system was tested at −50 ℃ and problems were identified at this temperature. Operational problems at such a low temperature were then analyzed using a 10M fishbone diagram. The obtained results allow both to define further research procedures and to set further research directions. They also allow for the assessment of interactions between identified problems.

KW - CAD design

KW - Hydraulic systems

KW - Problems analysis

UR - https://www.scopus.com/pages/publications/85174447486

U2 - 10.1007/978-3-031-44282-7_55

DO - 10.1007/978-3-031-44282-7_55

M3 - Conference contribution

AN - SCOPUS:85174447486

SN - 9783031442810

T3 - Lecture Notes in Mechanical Engineering

SP - 726

EP - 736

BT - Intelligent Systems in Production Engineering and Maintenance 3

A2 - Burduk, Anna

A2 - Batako, Andre D.L.

A2 - Machado, José

A2 - Wyczółkowski, Ryszrad

A2 - Dostatni, Ewa

A2 - Rojek, Izabela

PB - Springer Science and Business Media Deutschland GmbH

T2 - 4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023

Y2 - 13 September 2023 through 15 September 2023

ER -

Rakowska W , Galiński M , Gwiazda A, Butdee S, Xavior AM. Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures. In Burduk A, Batako ADL, Machado J, Wyczółkowski R, Dostatni E, Rojek I, editors, Intelligent Systems in Production Engineering and Maintenance 3. Springer Science and Business Media Deutschland GmbH. 2024. p. 726-736. (Lecture Notes in Mechanical Engineering). doi: 10.1007/978-3-031-44282-7_55

Analysis of Production Parameters of a Hydraulic Drive Designated to Work in Low Temperatures

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this