ANALIZA NUMERYCZNA WYTRZYMAŁOŚCI POŁĄCZEŃ ELEKTRYCZNYCH W MODUŁACH PV

Paweł Nowak; Krzysztof Rusin; Mariola Jureczko; Sebastian Rulik; Sabina Gawlik; Jeremi Bronowski; Bartłomiej Zatorski; Łukasz Murawski; Michał Jurczyk

ANALIZA NUMERYCZNA WYTRZYMAŁOŚCI POŁĄCZEŃ ELEKTRYCZNYCH W MODUŁACH PV

Translated title of the contribution: NUMERICAL ANALYSIS OF THE STRENGTH OF ELECTRICAL CONNECTIONS IN PV MODULES

Paweł Nowak
, Krzysztof Rusin
, Mariola Jureczko
, Sebastian Rulik
, Sabina Gawlik
, Jeremi Bronowski
, Bartłomiej Zatorski
, Łukasz Murawski
, Michał Jurczyk

Department of Power Engineering and Turbomachinery (RIE/RIE5)

Silesian University of Technology
Politechnice Śląskiej
Katedrze Mechaniki Teoretyczno – Stosowanej
firmie Famur Gearo
Katedrze Maszyn i Urządzeń Energetycznych

Research output: Contribution to journal › Article › peer-review

Abstract

The paper shows a numerical analysis of the strength of electrical connections in photovoltaic modules. The Ansys environment was used to conduct the analyses, which allowed for the creation of a 3D model and the performance of appropriate simulations. The numerical model was parameterized in such a way that it was possible to change the ribbon cross-section without having to change the entire model. During the simulation, it was checked how the distribution of the maximum stresses achieved on the ribbon changes depending on the cross-section of the given element. After analyzing the obtained results, it was noted that for a ribbon with a height of 0.15 mm, the maximum stresses are lower than for the other cases studied.

Translated title of the contribution	NUMERICAL ANALYSIS OF THE STRENGTH OF ELECTRICAL CONNECTIONS IN PV MODULES
Original language	Polish
Pages (from-to)	39-44
Number of pages	6
Journal	Rynek Energii
Volume	2025
Issue number	2
Publication status	Published - 2025

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

ASJC Scopus subject areas

General Mathematics
General Energy

Cite this

@article{6d9195612b1e4a2790d84da2e66a294e,

title = "ANALIZA NUMERYCZNA WYTRZYMA{\L}O{\'S}CI PO{\L}{\c A}CZE{\'N} ELEKTRYCZNYCH W MODU{\L}ACH PV",

abstract = "The paper shows a numerical analysis of the strength of electrical connections in photovoltaic modules. The Ansys environment was used to conduct the analyses, which allowed for the creation of a 3D model and the performance of appropriate simulations. The numerical model was parameterized in such a way that it was possible to change the ribbon cross-section without having to change the entire model. During the simulation, it was checked how the distribution of the maximum stresses achieved on the ribbon changes depending on the cross-section of the given element. After analyzing the obtained results, it was noted that for a ribbon with a height of 0.15 mm, the maximum stresses are lower than for the other cases studied.",

keywords = "PV panels, finite element method, renewable energy sources, ribbon",

author = "Pawe{\l} Nowak and Krzysztof Rusin and Mariola Jureczko and Sebastian Rulik and Sabina Gawlik and Jeremi Bronowski and Bart{\l}omiej Zatorski and {\L}ukasz Murawski and Micha{\l} Jurczyk",

year = "2025",

language = "polski",

volume = "2025",

pages = "39--44",

journal = "Rynek Energii",

issn = "1425-5960",

publisher = "Kaprint",

number = "2",

}

TY - JOUR

T1 - ANALIZA NUMERYCZNA WYTRZYMAŁOŚCI POŁĄCZEŃ ELEKTRYCZNYCH W MODUŁACH PV

AU - Nowak, Paweł

AU - Rusin, Krzysztof

AU - Jureczko, Mariola

AU - Rulik, Sebastian

AU - Gawlik, Sabina

AU - Bronowski, Jeremi

AU - Zatorski, Bartłomiej

AU - Murawski, Łukasz

AU - Jurczyk, Michał

PY - 2025

Y1 - 2025

N2 - The paper shows a numerical analysis of the strength of electrical connections in photovoltaic modules. The Ansys environment was used to conduct the analyses, which allowed for the creation of a 3D model and the performance of appropriate simulations. The numerical model was parameterized in such a way that it was possible to change the ribbon cross-section without having to change the entire model. During the simulation, it was checked how the distribution of the maximum stresses achieved on the ribbon changes depending on the cross-section of the given element. After analyzing the obtained results, it was noted that for a ribbon with a height of 0.15 mm, the maximum stresses are lower than for the other cases studied.

AB - The paper shows a numerical analysis of the strength of electrical connections in photovoltaic modules. The Ansys environment was used to conduct the analyses, which allowed for the creation of a 3D model and the performance of appropriate simulations. The numerical model was parameterized in such a way that it was possible to change the ribbon cross-section without having to change the entire model. During the simulation, it was checked how the distribution of the maximum stresses achieved on the ribbon changes depending on the cross-section of the given element. After analyzing the obtained results, it was noted that for a ribbon with a height of 0.15 mm, the maximum stresses are lower than for the other cases studied.

KW - PV panels

KW - finite element method

KW - renewable energy sources

KW - ribbon

UR - https://www.scopus.com/pages/publications/105009053031

M3 - Artykuł

AN - SCOPUS:105009053031

SN - 1425-5960

VL - 2025

SP - 39

EP - 44

JO - Rynek Energii

JF - Rynek Energii

IS - 2

ER -

ANALIZA NUMERYCZNA WYTRZYMAŁOŚCI POŁĄCZEŃ ELEKTRYCZNYCH W MODUŁACH PV

Abstract

UN SDGs

ASJC Scopus subject areas

Other files and links

Fingerprint

Cite this