Algorithms of control parameters selection for automation of FDM 3D printing process

Paweł Kogut; Krzysztof Kalinowski; Cezary Grabowik; Grzegorz Ćwikła; Iwona Paprocka

doi:10.1051/matecconf/201711205011

Algorithms of control parameters selection for automation of FDM 3D printing process

Department of Engineering Processes Automation and Integrated Manufacturing Systems (RMT/RMT2)

Silesian University of Technology

Research output: Contribution to journal › Conference article › peer-review

4 Citations (Scopus)

Abstract

The paper presents algorithms of control parameters selection of the Fused Deposition Modelling (FDM) technology in case of an open printing solutions environment and 3DGence ONE printer. The following parameters were distinguished: model mesh density, material flow speed, cooling performance, retraction and printing speeds. These parameters are independent in principle printing system, but in fact to a certain degree that results from the selected printing equipment features. This is the first step for automation of the 3D printing process in FDM technology.

Original language	English
Article number	05011
Journal	MATEC Web of Conferences
Volume	112
DOIs	https://doi.org/10.1051/matecconf/201711205011
Publication status	Published - 3 Jul 2017
Event	21st Innovative Manufacturing Engineering and Energy International Conference, IManE and E 2017 - Iasi, Romania Duration: 24 May 2017 → 27 May 2017

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

ASJC Scopus subject areas

General Chemistry
General Materials Science
General Engineering

Access to Document

10.1051/matecconf/201711205011

Cite this

@article{f2edb002cc2f4a7a846dbcbec9027efc,

title = "Algorithms of control parameters selection for automation of FDM 3D printing process",

abstract = "The paper presents algorithms of control parameters selection of the Fused Deposition Modelling (FDM) technology in case of an open printing solutions environment and 3DGence ONE printer. The following parameters were distinguished: model mesh density, material flow speed, cooling performance, retraction and printing speeds. These parameters are independent in principle printing system, but in fact to a certain degree that results from the selected printing equipment features. This is the first step for automation of the 3D printing process in FDM technology.",

author = "Pawe{\l} Kogut and Krzysztof Kalinowski and Cezary Grabowik and Grzegorz {\'C}wik{\l}a and Iwona Paprocka",

note = "Publisher Copyright: {\textcopyright} 2017 The Authors, published by EDP Sciences.; 21st Innovative Manufacturing Engineering and Energy International Conference, IManE and E 2017 ; Conference date: 24-05-2017 Through 27-05-2017",

year = "2017",

month = jul,

day = "3",

doi = "10.1051/matecconf/201711205011",

language = "English",

volume = "112",

journal = "MATEC Web of Conferences",

issn = "2261-236X",

publisher = "EDP Sciences",

}

TY - JOUR

T1 - Algorithms of control parameters selection for automation of FDM 3D printing process

AU - Kogut, Paweł

AU - Kalinowski, Krzysztof

AU - Grabowik, Cezary

AU - Ćwikła, Grzegorz

AU - Paprocka, Iwona

PY - 2017/7/3

Y1 - 2017/7/3

N2 - The paper presents algorithms of control parameters selection of the Fused Deposition Modelling (FDM) technology in case of an open printing solutions environment and 3DGence ONE printer. The following parameters were distinguished: model mesh density, material flow speed, cooling performance, retraction and printing speeds. These parameters are independent in principle printing system, but in fact to a certain degree that results from the selected printing equipment features. This is the first step for automation of the 3D printing process in FDM technology.

AB - The paper presents algorithms of control parameters selection of the Fused Deposition Modelling (FDM) technology in case of an open printing solutions environment and 3DGence ONE printer. The following parameters were distinguished: model mesh density, material flow speed, cooling performance, retraction and printing speeds. These parameters are independent in principle printing system, but in fact to a certain degree that results from the selected printing equipment features. This is the first step for automation of the 3D printing process in FDM technology.

UR - https://www.scopus.com/pages/publications/85023605123

U2 - 10.1051/matecconf/201711205011

DO - 10.1051/matecconf/201711205011

M3 - Conference article

AN - SCOPUS:85023605123

SN - 2261-236X

VL - 112

JO - MATEC Web of Conferences

JF - MATEC Web of Conferences

M1 - 05011

T2 - 21st Innovative Manufacturing Engineering and Energy International Conference, IManE and E 2017

Y2 - 24 May 2017 through 27 May 2017

ER -

Algorithms of control parameters selection for automation of FDM 3D printing process

Abstract

UN SDGs

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this