Skip to main navigation Skip to search Skip to main content

Abrasive Wear Resistance of Ultrafine Ausferritic Ductile Iron Intended for the Manufacture of Gears for Mining Machinery

  • Warsaw University of Technology
  • AGH University of Krakow
  • KOMAG Institute of Mining Technology
  • Clausthal University of Technology

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Abstract

The purpose of this study was to experimentally determine the abrasion wear properties of ausferritic ductile iron austempered at 250 °C in order to obtain cast iron of class EN-GJS-1400-1. It has been found that such a cast iron grade makes it possible to create structures for material conveyors used for short-distance transport purposes, required to perform in terms of abrasion resistance under extreme conditions. The wear tests addressed in the paper were conducted at a ring-on-ring type of test rig. The test samples were examined under the conditions of slide mating, where the main destructive process was surface microcutting via loose corundum grains. The mass loss of the examined samples was measured as a parameter characteristic of the wear. The volume loss values thus obtained were plotted as a function of initial hardness. Based on these results, it has been found that prolonged heat treatment (of more than 6 h) causes only an insignificant increase in the resistance to abrasive wear.

Original languageEnglish
Article number4311
JournalMaterials
Volume16
Issue number12
DOIs
Publication statusPublished - Jun 2023

Keywords

  • abrasion wear
  • ausferritic ductile iron
  • austempering temperature
  • gears

ASJC Scopus subject areas

  • General Materials Science
  • Condensed Matter Physics

Fingerprint

Dive into the research topics of 'Abrasive Wear Resistance of Ultrafine Ausferritic Ductile Iron Intended for the Manufacture of Gears for Mining Machinery'. Together they form a unique fingerprint.

Cite this