A zero-dimensional, real gas model of an α Stirling engine

In the paper the authors present a zero-dimensional model of an alpha type Stirling engine and special consideration is paid to the problems of the evaluation of internal heat transfer between the heat exchange surfaces and the working fluid. Furthermore, a thermodynamic model of the engine, developed by the authors is shown. The model can be classified as zero-dimensional. Energy and mass conservation equations are written in a differential form, and solved for finite time steps for control volumes, that is the expansion cylinder, the compression cylinder, the regenerator, the regenerator matrix and the engine as a whole, which allows to transform the differential equations into a solvable system of algebraic equations. Unlike most models shown in literature, the one created by the authors evaluates the gas properties based on a real gas model. The impl ementation of a real gas model further helps to evaluate parameters such as viscosity and thermal conductivity of the gas, which is necessary for calculating the heat transfer coefficients. Those are calculated for each volume from known correlations, for a given moment in time. That is, the gas parameters needed are not evaluated as an average for the stroke, rather, they are calculated from instantaneous gas parameters and implemented as variables in the energy equations. The engine working fluid is atmospheric air. The influence of different heat transfer models on the predicted engine performance is shown in the form of engine characteristics for different models, based on variables such as pressure, and rotational. It can be shown, that further research into in-cylinder heat transfer is necessary, as the established models, when implemented into the Stirling engine, predict starkly different engine performance. Furthermore, non-physical results based on those models are shown.