A novel method for measuring piezoelectric coefficients

Bartłomiej Toroń; Piotr Szperlich; Marian Nowak; Alicja Starczewska

doi:10.1016/j.measurement.2022.112274

A novel method for measuring piezoelectric coefficients

Bartłomiej Toroń
, Piotr Szperlich
, Marian Nowak
, Alicja Starczewska

Division of Solid State Physics (RIF/RIF1)

Silesian University of Technology

Research output: Contribution to journal › Article › peer-review

18 Citations (Scopus)

Abstract

This paper presents a novel method for directly measuring a material's piezoelectric coefficients based on fast gas decompression. The measured output voltage and the speed of pressure change allow for the calculation of the piezoelectric coefficients. The method is simple, fast, reliable, and easy to apply. It has been used on quartz crystal, PZT ceramic, and antimony sulfoiodide single crystals, where d₁₁ = 2.315(25) pC/N, d₃₃ = 506(16) pC/N, and d₃₁ = 339(16) pC/N were determined, respectively. These values are in good agreement with those reported in the literature. The physical basis of the method and experimental results recorded for different pressures are described.

Original language	English
Article number	112274
Journal	Measurement: Journal of the International Measurement Confederation
Volume	206
DOIs	https://doi.org/10.1016/j.measurement.2022.112274
Publication status	Published - Jan 2023

Keywords

Gas decompression
Piezoelectric coefficient
Piezoelectric effect
Pressure

ASJC Scopus subject areas

Instrumentation
Electrical and Electronic Engineering

Access to Document

10.1016/j.measurement.2022.112274

Cite this

@article{ca1afc37ef5542d187a69a170f709c50,

title = "A novel method for measuring piezoelectric coefficients",

abstract = "This paper presents a novel method for directly measuring a material's piezoelectric coefficients based on fast gas decompression. The measured output voltage and the speed of pressure change allow for the calculation of the piezoelectric coefficients. The method is simple, fast, reliable, and easy to apply. It has been used on quartz crystal, PZT ceramic, and antimony sulfoiodide single crystals, where d11 = 2.315(25) pC/N, d33 = 506(16) pC/N, and d31 = 339(16) pC/N were determined, respectively. These values are in good agreement with those reported in the literature. The physical basis of the method and experimental results recorded for different pressures are described.",

keywords = "Gas decompression, Piezoelectric coefficient, Piezoelectric effect, Pressure",

author = "Bart{\l}omiej Toro{\'n} and Piotr Szperlich and Marian Nowak and Alicja Starczewska",

note = "Publisher Copyright: {\textcopyright} 2022 Elsevier Ltd",

year = "2023",

month = jan,

doi = "10.1016/j.measurement.2022.112274",

language = "English",

volume = "206",

journal = "Measurement: Journal of the International Measurement Confederation",

issn = "0263-2241",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - A novel method for measuring piezoelectric coefficients

AU - Toroń, Bartłomiej

AU - Szperlich, Piotr

AU - Nowak, Marian

AU - Starczewska, Alicja

PY - 2023/1

Y1 - 2023/1

N2 - This paper presents a novel method for directly measuring a material's piezoelectric coefficients based on fast gas decompression. The measured output voltage and the speed of pressure change allow for the calculation of the piezoelectric coefficients. The method is simple, fast, reliable, and easy to apply. It has been used on quartz crystal, PZT ceramic, and antimony sulfoiodide single crystals, where d11 = 2.315(25) pC/N, d33 = 506(16) pC/N, and d31 = 339(16) pC/N were determined, respectively. These values are in good agreement with those reported in the literature. The physical basis of the method and experimental results recorded for different pressures are described.

AB - This paper presents a novel method for directly measuring a material's piezoelectric coefficients based on fast gas decompression. The measured output voltage and the speed of pressure change allow for the calculation of the piezoelectric coefficients. The method is simple, fast, reliable, and easy to apply. It has been used on quartz crystal, PZT ceramic, and antimony sulfoiodide single crystals, where d11 = 2.315(25) pC/N, d33 = 506(16) pC/N, and d31 = 339(16) pC/N were determined, respectively. These values are in good agreement with those reported in the literature. The physical basis of the method and experimental results recorded for different pressures are described.

KW - Gas decompression

KW - Piezoelectric coefficient

KW - Piezoelectric effect

KW - Pressure

UR - https://www.scopus.com/pages/publications/85143523994

U2 - 10.1016/j.measurement.2022.112274

DO - 10.1016/j.measurement.2022.112274

M3 - Article

AN - SCOPUS:85143523994

SN - 0263-2241

VL - 206

JO - Measurement: Journal of the International Measurement Confederation

JF - Measurement: Journal of the International Measurement Confederation

M1 - 112274

ER -

A novel method for measuring piezoelectric coefficients

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this